|
IS Number | |||
|
IS 1024 : 1999 |
|||
Title :-Code of practice for use of welding in bridges and structures subject to dynamic loading (Second Revision) | |||
Unit Price |
Status |
Amendment |
Reaffirmed |
Gr 7 |
Active |
|
|
Page Size |
No. of Pages |
Tech. Committee |
|
A4 |
16 |
MTD 12 |
|
ICS 25.160.10; 93.040 | |||
1 Scope
1.1 This standard covers the use of manual, semi-automatic and automatic metal-arc welding processes in the fabrication of steel bridges and structures subject to dynamic loading by welding.
1.2 This standard also applies to the design, different stresses to be considered for the design, and construction of the bridges.
1.3 The welding procedure for this standard shall apply to IS 9595 : 1996 `Metal arc welding of carbon and carbon manganese steels - Recommendations
1.4 All the provisions stated for the inspection of welds in IS 822 : 1970 `Code of procedure for inspection of welds', shall be applicable in conjunction with the provisions of this standard.
2 References
IS 307 : 1966 Carbon dioxide
IS 812 : 1957 Glossary of terms relating to welding and cutting of metals
IS 814 : 1991 Covered electrodes for metal arc welding of structural steel
IS 822 : 1970 Code of procedure for inspection of welds
IS 1395 : 1982 Low and medium alloy steel covered electrodes for manual metal arc welding
IS 2062 : 1992 Steel for general structural purposes
IS 3613 : 1974 Acceptance tests for wire - flux combinations for submerged arc welding of structural steels
IS 4353 : 1995 Submerged arc welding of mild steel and low alloy steels - Recommendations
IS 5760 : 1983 Compressed argon
IS 6419 : 1996 Welding rods and bare electrodes for gas shielded arc welding of structural steel
IS 7280 : 1974 Bare wire electrodes for submerged arc welding of structural steels
IS 7307 : Part 1 : 1974 Approval tests of welding procedures: Part 1 Fusion welding of steel
IS 7310 : Part 1 : 1974 Approval tests for welders working to approved welding procedures: Part 1 Fusion welding of steel
IS 7318 : Part 1 : 1974 Approval tests for welders when welding procedure approval is not required: Part 1 Fusion welding of steel
IS 8500 : 1991 Structural steel-microalloyed (medium and high strength qualities)
IS 9595 : 1996 Metal arc welding of carbon and carbon manganese steels - Recommendations
IS 10178 : 1995 CO2 gas shielded metal arc welding of structural steels - Recommendations