|
IS Number |
Identical | ||
|
IS 1608 : 2005 |
ISO 6892 : 1998 | ||
Title :-Metallic Materials - Tensil Testing at Ambient Temperature (Third Revision) | |||
Unit Price |
Status |
Amendment |
Reaffirmed |
Gr 13 |
Active |
|
|
Page Size |
No. of Pages |
Tech. Committee |
Superseding |
A4 |
43 |
MTD 3 |
IS 1521,IS 1663,IS 1816,IS 1894,IS 2078,IS 2654,IS 2655,IS 2656,IS 2657,IS 2658,IS 4713, IS 8285 |
ICS 77.040.10 | |||
National Foreword
This Indian Standard which is identical with ISO 6892 : 1998 `Metallic materials - Tensile testing at ambient temperature' issued by the International Organization for Standardization (ISO) was adopted by the Bureau of Indian Standards on the recommendations of the Mechanical Testing of Metals Sectional Committee and approval of the Metallurgical Engineering Division Council.
References
| International Standard | Corresponding Indian Standard |
| ISO 286-2 : 1988 | IS 919 : Part 2 : 1993 ISO systems of limits and fits: |
| Part 2 Tables of standard tolerance grades and | |
| limit deviations for holes and shafts | |
| ISO 377 : 1997 | IS 3711 : 1990 Wrought steel - Selection and |
| preparation of samples and test pieces for mechanical test | |
| ISO 2566-1 : 1984 | IS 3803 : Part 1 : 1989 Steel - Conversion of elongation values: |
| Part 1 Carbon and low alloys steels | |
| ISO 2566-2 : 1984 | IS 3803 : Part 2 : 1989 Steel - Conversion of elongation values: |
| Part 2 Austenitic steels | |
| ISO 7500-1 : 1986 | IS 1828 : Part 1 : 1991 Metallic materials - Verification of static uniaxial testing machines: |
| Part 1 Tensile testing machines | |
| ISO 9513 : 1989 | IS 12872 : 1990 Metallic materials - Verification |
| of extensometers used in uniaxial testing |