Print Current Page

IS Number
IS 1916 : 1989
Title :-Specification for steel cylinder pipe with concrete lining and coating (First Revision)
Unit Price	Status	Amendment	Reaffirmed
Gr 3	Active		2000
Page Size	No. of Pages	Tech. Committee
A4	6	CED 53
UDC 621.643.2 - 034.1 - 033.37 : 628.1/.2

1 Scope

1.1 This standard lays down the requirements for steel cylinder pipes with concrete lining and coating having nominal internal diameter from 200 mm to 3000 mm for use in water mains, sewers, irrigation works and similar situations.

Note 1 : Such pipes shall generally be provided with:

a) plain ends

1) for butt welded joints with collar upto 700 mm dia, and

2) for simple butt welded jointing above 800 mm dia.

b) flanged ends; and

c) Spigot and socket ends (conforming to relevant Indian Standard) for joints with rubber rings.

Note 2 : Pipes having other type of ends may be used, where specifically required.

2 References

List of Referred Indian Standards

IS 226 : 1975 Specification for structural steel (standard quality)

IS 269 : 1989 Specification for 33 grade ordinary Portland cement

IS 383 : 1970 Specification for coarse and fine aggregates from natural sources for concrete

IS 432 : Part 1 : 1982 Specification for mild steel and medium tensile steel bars and hard-drawn steel wire for concrete reinforcement: Part 1 Mild steel and medium tensile steel bars

IS 432 : Part 2 : 1982 Specification for mild steel and medium tensile steel bars and hard-drawn steel wire for concrete reinforcement : Part 2 Hard-drawn steel wire

IS 455 : 1989 Specification for Portland slag cement

IS 516 : 1959 Method of test for strength of concrete

IS 814 : Part 2 : 1974 Specification for covered electrodes for metal arc welding of structural steels: Part 2 Welding sheets

IS 816 : 1969 Code of practice for use of metal arc welding for general construction in mild steel

IS 1489 : 1976 Specification for Portland Pozzolana cement

IS 2062 : 1984 Specification for weldable structural steel

IS 4031 : Part 6 : 1988 Methods of physical tests for hydraulic cement : Part 6 Determination of compressive strength of hydraulic cement (other than masonry cement)

IS 6452 : 1989 Specification for high alumina cement for structural use

IS 6909 : 1990 Specification for supersulphated cement

IS 8041 : 1990 Specification for rapid hardening Portland cement

IS 8043 : 1978 Specification for hydrophobic Portland cement

IS 8112 : 1989 Specification for 43 grade ordinary Portland cement

IS 12269 : 1987 Specification for 53 grade ordinary Portland cement

IS 12330 : 1988 Specification for sulphate resisting Portland cement