|
IS Number | |||
|
IS 800 : 1984 |
|||
Title :-Code of practice for general construction in steel (Second Revision) | |||
Unit Price |
Status |
Amendment |
Reaffirmed |
Gr 15 |
Active |
3 |
1998 |
Page Size |
No. of Pages |
Tech. Committee |
|
A5 |
137 |
CED 7 |
|
UDC 693.814 : 006 - 76 | |||
1 Scope
1.1 This code applies to general construction in steel. Specific provisions for bridges, chimneys, cranes, tanks, transmission line towers, storage structures, tubular structures and structures using cold formed light gauge sections, etc, are covered in separate codes.
1.2 The provisions of this code generally apply to riveted, bolted and welded constructions, using hot rolled steel sections.
1.3 This code gives only general guidance as regards the various loads to be considered in design, For actual loads to be used reference may be made to IS 875 : 1964.
2 References
IS 226 : 1975 Structural steel (standard quality)
IS 456 : 1978 Code of practice for plain and reinforced concrete
IS 696 : 1972 Code of practice for general engineering drawings
IS 786 : 1967 (Supplement) SI supplement to Indian Standard conversion factors and conversion tables
IS 812 : 1957 Glossary of terms relating to welding and cutting of metals
IS 813 : 1961 Scheme of symbols for welding
IS 816 : 1969 Code of practice for use of metal are welding for general construction in mild steel
IS 817 : 1966 Code of practice for training and testing of metal are welders
IS 819 : 1957 Code of practice for resistance spot welding for light assemblies in mild steel
IS 875 : 1964 Code of practice for structural safety of buildings: Loading standards
IS 919 : 1963 Recommendations for limits and fits for engineering
IS 961 : 1975 Structural steel (high tensile)
IS 962 : 1967 Code of practice for architectural and building drawings
IS 1024 : 1979 Code of practice for use of welding in bridges and structures Subject to dynamic loading
IS 1030 : 1982 Carbon steel castings for general engineering purposes
IS 1148 : 1973 Hot-rolled steel rivet bars (up to 40 mm diameter) for structural purposes
IS 1149 : 1982 High tensile steel rivet bars for structural purposes
IS 1261 : 1959 Code of practice for seam welding in mild steel
IS 1278 : 1972 Filler rods and wires for gas welding
IS 1323 : 1962 Code of practice for oxy-acetylene welding for structural work in mild steel
IS 1363 : 1967 Black hexagon bolts, nuts and lock nuts (diameter 6 to 39 mm) and black hexagon screws (diameter 6 to 24 mm)
IS 1364 : 1967 Precision and semi-precision hexagon bolts, screws, nuts and lock nuts (diameter range 6 to 39 mm)
IS 1367 : 1967 Technical supply conditions for threaded fasteners
IS 1393 : 1961 Code of practice for training and testing of oxy-acetylene welders
IS 1395 : 1971 Molybdenum and chromium molybdenum vanadium low alloy steel electrodes for metal are welding
IS 3640 : 1967 Hexagon fit bolts
IS 3757 : 1972 High-tensile friction grip bolts
IS 4000 : 1967 Code of practice for assembly of structural joints using high tensile friction grip fasteners
IS 5369 : 1975 General requirements for plain washers and lock washers
IS 5370 : 1969 Plain washers with outside diameter 3 x inside diameter
IS 5372 : 1975 Taper washers for channels (ISMC)
IS 5374 : 1975 Taper washers for I-beams (ISMB)
IS 6419 : 1971 Welding rods and bare electrodes for gas shielded arc welding of structural steel
IS 6560 : 1972 Molybdenum and chromium-molybdenum low alloy steel welding rods and base electrodes for gas shielded arc welding
IS 6610 : 1972 Heavy washers for steel structures
IS 6623 : 1972 High tensile friction grip nuts
IS 6639 : 1972 Hexagon bolts for steel structures
IS 6649 : 1972 High tensile friction grip washers
IS 7205 : 1973 Safety code for erection of structural steel work
IS 7215 : 1974 Tolerances for fabrication of steel structures
IS 7280 : 1974 Bare wire electrodes for submerged arc welding of structural steels
IS 7307 : Part 1 : 1974 Approval tests for welding procedures: Part 1 Fusion welding of steel
IS 7310 : Part 1 : 1974 Approval tests for welders working to approved welding procedures: Part 1 Fusion welding of steel
IS 7318 : Part 1 : 1974 Approval tests for welders when welding procedure is not required: Part 1 Fusion welding of steel
IS 8500 : 1977 Weldable structural steel (medium and high strength qualities)
IS 9595 : 1980 Recommendations for metal arc welding of carbon and carbon manganese steels