|
IS Number | |||
|
IS 816 : 1969 |
|||
Title :-Code of practice for use of metal arc welding for general construction in mild steel (First Revision) | |||
Unit Price |
Status |
Amendment |
Reaffirmed |
Gr 7 |
Active |
2 |
1998 |
Page Size |
No. of Pages |
Tech. Committee |
|
A5 |
27 |
MTD 12 |
|
UDC 621.791.753 : 624.014.2 | |||
1 Scope
1.1 This code is supplement to IS : 800-1962 and covers the use of metal arc welding in the design and fabrication of steel structures in general building construction. It is intended primarily for manual arc welding but may also be applied to automatic and semi-automatic arc processes.
1.2 This code, subject to the provisions of IS : 1024-1968 shall also apply to bridges and structures subject to dynamic loading.
1.3 The provisions of this code generally apply to the repair of existing building construction in mild steel but do not necessarily cover all the provisions applicable to the strengthening of existing structures which should be the subject of special consideration. Special provisions covering the design and fabrication of pipelines, boiler storage tanks and tubular steel structures, are intended to be dealt with in separate codes.
2 References
IS 226 : 1969 Specification for structural steel
IS 696 : 1972 Code of practice for general engineering drawings
IS 800 : 1962 Code of practice for use of structural steel in general building construction
IS 812 : 1957 Glossary of terms relating to welding and cutting of metals
IS 813 : 1961 Scheme of symbols for welding
IS 814 : Part I : 1974 Covered electrodes for metal arc welding of structural steels: Part I For welding products other than sheets
IS 814 : Part II : 1974 Covered electrodes for metal arc welding of structural steels: Part II For welding sheets
IS 817 : 1966 Code of practice for training and testing of metal arc welders
IS 818 : 1968 Code of practice for safety and health requirements in electric and gas welding and cutting operations
IS 822 : Code of practice for inspection of welds (under preparation)
IS 823 : 1964 Code of procedure for manual metal arc welding of mild steel
IS 962 : 1967 Code of practice for architectural and building drawings
IS 1024 : 1968 Code of practice for use of welding in bridges and structures subject to dynamic loading
IS 1181 : 1967 Qualifying tests of metal arc welders (engaged in welding structures other than pipes)
IS 2062 : 1969 Specification for structural steel (fusion welding quality)
IS 3613 : 1966 Acceptance tests for wire flux combinations for submerged-arc welding
IS 4353 : 1967 Recommendations for submerged arc welding of mild steel and low alloy steels
IS 4944 : 1968 Code of procedure for welding at low ambient temperature