|
दिसम्बर 2004 के दौरान
निम्न नये व पुनीरीक्षित
मानक एवं संशोधन
प्रकाशित हुए The following New and Revised Standards and Amendments
Published during December 2004 |
||
|
CIVIL ENGINEERING: |
||
|
IS 2556 (Part 2) : 2004 |
Vitreous sanitary
appliances (Vitreous China) - SpecificationPart 2
Specification Requirements of washdown Water
closets (Fifth revision) |
Gr 3 |
|
IS 2556 (Part 8) : 2004 |
Vitreous sanitary
appliances (Vitreous China) - SpecificationPart 8
Specification Requirements of pedestal close Coupled washdown
and Syphonic water closets (Fifth revision) |
Gr 4 |
|
IS 2556 (Part 15) : 2004 |
Vitreous sanitary
appliances (Vitreous China) - Specification Part 15 Specific requirements Of
universal water closets (Second revision) |
Gr 3 |
|
IS 5312 (Part 1) : 2004 |
Swing check type reflux
(Non-Return) valves for water Works purposes - Specification Part 1 Single
door pattern (Second revision) |
Gr 3 |
|
IS 12235(Part 1 to 19) : 2004 |
Thermoplastics pipes and
Fittings --- Methods of Test (First revision) |
Gr 14 |
|
IS 15497 : 2004 |
Gaseous fire
extinguishing Systems - IG 01 Extinguishing Systems |
Gr 5 |
|
IS 15498 : 2004 |
Guidelines for improving
the Cyclonic resistance of low rise Houses and other buildings/ Structures |
Gr 7 |
|
IS 15499 : 2004 |
Guidelines for survey of
housing And building typology in cyclone Prone areas for assessment of
Vulnerability of regions and post Cyclone damage estimation |
Gr 7 |
|
IS 15512 : 2004 |
Selection and use of
various Types of medium density fibre Boards - Code
of Practice |
Gr 5 |
|
High density polyethylene
pipes for sewerage - Specification |
Gratis |
|
|
|
||
|
CHEMICAL: |
||
|
IS 3738 : 2004 |
Rubber boots -
Specification (Third revision) |
Gr 6 |
|
IS 15520 : 2004 |
Graphic technology -
Paints And printing inks - Assessment |
Gr 3 |
|
Fountain pen ink -
Ferro-Gallo tannate (0.1 percent iron content)
Specification (Third revision) |
Gratis |
|
|
Specification for sodium sulphite, anhydrous (Fourth revision) |
Gratis |
|
|
Specification for school
chalks moulded, white |
Gratis |
|
|
Clinical thermometers
Solid stem type - Specification (Second revision) |
Gratis |
|
|
Clinical thermometers
Solid stem type - Specification (Second revision) |
Gratis |
|
|
Stencil paper -
Specification (Second revision) |
Gratis |
|
|
Specification for filters
for Drinking water purposes (First revision) |
Gratis |
|
|
Dimensions of 127, 120
and 620 roll film, backing paper And film spools |
Gratis |
|
|
Knifing filler (Two pack)
for Polyurethane system -- Specification |
Gratis |
|
|
|
||
|
ELECTROTECHNICAL: |
||
|
IS 2596 : 2004 |
Bulbs (Lamps) for Miners'
Cap-Lamps-Specification (Second Revision) |
Gr 7 |
|
ac Watthour
meters, classes 0.5, 1 and 2 - Specification (First revision) |
Gratis |
|
|
ac Static watthour meters, Class 1 and 2 - Specification (First
revision) |
Gratis |
|
|
ac Static transformer
operated watthour and var-hour
meters, Class 0.2 S and 0.5 S - Specification |
Gratis |
|
|
|
||
|
ELECTRONICS
AND INFORMATION TECHNOLOGY: |
||
|
IS 14901(Part 5) : 2004 |
Semiconductors devices --
Descrete devices and Integrated circuits Part 5
Optoelectronic devices |
Rs. 1175/- |
|
|
||
|
FOOD
AND AGRICULTURAL: |
||
|
IS 1008 : 2004 |
Sugar boiled
confectionery -- Specification (Second revision) |
Gr 2 |
|
IS 6483 : 2004 |
Tractors and machinery
for Agriculture and forestry - Linch Pins and
spring pins - Dimensions and requirements (Second revision) |
Gr 2 |
|
IS 9629 : 2004 |
Maize atta,
maize maida and Maize Suji
- Specification (First revision) |
Gr 2 |
|
IS 15470 : 2004 |
Wheat flour -
Determination of dry gluten |
Gr 1 |
|
|
||
|
MECHANICAL
ENGINEERING: |
||
|
IS 5890 : 2004 |
Mobile hot mix asphalt
plant, Light duty - Requirements (First revision) |
Gr 2 |
|
IS 15530 : 2004 |
Conveyor chains,
attachments and sprockets - Specification |
Gr 7 |
|
IS 15534 : 2004 |
Continuous mechanical Handling Equipment for loose Bulk materials -
Couplings and Hose components used in Pneumatic handling - Safety code |
Gr 1 |
|
|
||
|
MEDICAL
INSTRUMENTS, GENERAL AND PRODUCTUION ENGINEERING: |
||
|
IS 1983 : 2004 |
Shank for turning and planing Tools - Shapes and dimensions of the section
(Second revision) |
Gr 1 |
|
|
||
|
METALLURGICAL
ENGINERING : |
||
|
IS 814 : 2004 |
Covered electrodes for
manual Metal arc welding of carbon and carbon manganese steel Specification
(Sixth revision) |
Gr 9 |
|
IS 1473 : 2004 |
Methods of chemical
analysis Of manganese ores (First revision) |
Gr 8 |
|
IS 10345 : 2004 |
Flux grade limestone for
use In iron and steel making - Specification (Second revision) |
Gr 1 |
|
IS 12820 : 2004 |
Dimensional requirements
Of rubber gaskets for Mechanical joints and push-on Joints for use with cast
iron Pipes and fittings for carrying Water, gas and sewage (First revision) |
Gr 2 |
|
IS :13382 : 2004 |
Cast iron specials for
Mechanical and push-on Flexible joints for pressure Pipe lines for water, gas
And sewage - Specification (First revision) |
Gr 11 |
|
IS 15468 : 2004 |
Performance evaluation of
Ultrasonic thickness gauges |
Gr 1 |
|
IS 15508 : 2004 |
Refractory mass (Basic
Gunning) for steel plant Application - Specification |
Gr 1 |
|
IS 15531 : 2004 |
Recommended practice for
Ultrasonic testing of weld Fillets of non-linear joints |
Gr 4 |
|
Gold and gold alloys, Jewellery/artefacts - Fitness And marking --
Specification |
Gratis |
|
|
|
||
|
PETROLEUM,
COAL AND RELATED PRODUCTS: |
||
|
IS 15532: 2004 |
Plastics Crates for
Fruits and Vegetables-Specification |
Gr 3 |
|
Methods for Testing Tar
and Bituminous Materials: Determination of Specific Gravity (First Revision) |
Gratis |
|
|
Methods for testing tar
and Bituminous materials: Determination of viscosity Part 1 Industrial
viscosity (First revision) |
Gratis |
|
|
Methods for testing tar
and Bituminous materials: Determination of ductility (First revision) |
Gratis |
|
|
Methods of test for
petroleum and its products (P : 64) Non- Volatile matter in solvents (First
revision) |
Gratis |
|
|
Methods of test for
petroleum and its products (P :147) Determination of potential gum In motor gasolines |
Gratis |
|
|
Methods of test for
plastics Containers (First revision) |
Gratis |
|
|
Methods for testing tar
and Bituminous materials: Determination of effect of heat and air by thin
film oven test |
Gratis |
|
|
Plastics feeding bottles |
Gratis |
|
|
|
||
|
TRANSPORT
ENGINEERING: |
||
|
IS 15515 : 2004 |
Industrial variable-reach
trucks-additional stability Testsb for trucks
handling Freight containers of length 6 m and above |
Gr 5 |
|
IS 7907 (Part 1):2004 |
Helical extension springs
Part 1 Design and calculation For springs made from Circular section wire and
bar (First revision) |
Gr 9 |
|
IS 9089 : 2004 |
Aircraft-aluminium and Wrought aluminium
alloy rivets - general requirements (Second revision) |
Gr 3 |
|
IS 15487 : 2004 |
Industrial trucks -
Specification For indicator lights for container Handling and grappler arm
Operations |
Gr 3 |
|
IS 15494 : 2004 |
Packaging - Tactile
warnings Of danger - Requirements |
Gr 3 |
|
IS 15514 : 2004 |
Industrial trucks
operating in Special conditions of stacking With load laterally displaced By
powered devices - Additional Stability test |
Gr 2 |
|
|
||
|
TEXTILES: |
||
|
IS :14281 : 2004 |
Textiles - Glossary of
terms Relating to made-up textile Items and ready-made Garments |
Gr 7 |
|
|
||
नवम्बर
2004 के दौरान निम्न
नये व पुनीरीक्षित
मानक एवं संशोधन
प्रकाशित हुए
The
following New and Revised Standards and Amendments Published during November
2004
|
CIVIL ENGINEERING |
||
|
IS
2556(Part 3) : 2004 |
Functional
requirements for rescue Tender for air fields (Second revision) |
Gr 7 |
|
IS
1659 : 2004 |
Block
boards Specification (Fourth revision) |
Gr 8 |
|
IS
2878 : 2004 |
Fire
extinguisher, carbon dioxide Type (Portable and trolley Mounted)
Specification (Third revision) |
Gr 8 |
|
IS
4907 : 2004 |
Method
of testing timber connector Joints (First revision) |
Gr 3 |
|
IS
7673 : 2004 |
Fire
fighting equipments --Glossary of
terms (First revision) |
Gr 5 |
|
IS
15455 : 2004 |
Grading
rules for split canes |
Gr 1 |
|
IS
15456 : 2004 |
Grading
rules for unsplit canes |
Gr 1 |
|
IS
15457 : 2004 (Superseding |
Logs
for production of sliced Veneers -- Specification |
Gr 2 |
अक्टूबर 2004 के दौरान
निम्न नये व पुनीरीक्षित
मानक एवं संशोधन
प्रकाशित हुए
The following New and Revised Standards and
Amendments Published during October 2004
|
CIVIL ENGINEERING |
||
|
IS
956 : 2004 |
Functional
requirements for rescue Tender for air fields (Second revision) |
Gr 7 |
|
IS
1659 : 2004 |
Block
boards Specification (Fourth revision) |
Gr 8 |
|
IS
2878 : 2004 |
Fire
extinguisher, carbon dioxide Type (Portable and trolley Mounted)
Specification (Third revision) |
Gr 8 |
|
IS
4907 : 2004 |
Method
of testing timber connector Joints (First revision) |
Gr 3 |
|
IS
7673 : 2004 |
Fire
fighting equipments --Glossary of
terms (First revision) |
Gr 5 |
|
IS
15455 : 2004 |
Grading
rules for split canes |
Gr 1 |
|
IS
15456 : 2004 |
Grading
rules for unsplit canes |
Gr 1 |
|
IS
15457 : 2004 (Superseding |
Logs
for production of sliced Veneers -- Specification |
Gr 2 |
|
IS
15458 : 2004 |
Classification
of Indian canes And their zonal distribution |
Gr 3 |
|
IS
15491 : 2004 |
Medium
density coirboards for General purposes -- Specification |
Gr 5 |
|
IS
15493 : 2004 |
Gaseous
fire extinguishing systems -- General requirements |
Gr 10 |
|
IS
15496 : 2004 |
Inspection
and maintenance of Gaseous fire extinguishing systems Code of practice |
Gr 4 |
|
IS
15501 : 2004 |
Gaseous
fire extinguishing systems -- IG 541 Extinguishing systems |
Gr 7 |
|
CHEMICAL |
||
|
IS
3387 : 2004 |
Toothbrush --
Specification (Second revision) |
Gr 4 |
|
IS
5557 : 2004 |
Industrial
and protective rubber knee And ankle boots Specification (Fourth revision) |
Gr 7 |
|
IS
5852 : 2004 |
Protective
steel toe caps for Footwear Specification (Fourth revision) |
Gr 3 |
|
ELECTROTECHNICAL |
||
|
IS
12729 : 2004 |
Common
specification for high IEC 60694(2002) voltage switchgear and controlgear Standards (First revision) |
Gr 19 |
|
ELECTRONICS AND INFORMATION TECHNOLOGY |
||
|
IS
14901(Part 4) : 2004 |
Semiconductor
devices Discrete devices and integrated circuits Part 4 Microwave devices |
Gr 19 |
|
FOOD AND AGRICULTURAL |
||
|
IS
11859 : 2004 |
Agricultural
tractors -- Turning And clearance diameters
Methods of test (First revision) |
Gr 3 |
|
MECHANICAL ENGINEERING |
||
|
IS
8198 : 2004 [Superseding IS 8198 (Parts 1 to 4) : 1984] |
Steel
sylinders for compressed gases (Atmospheric gases,
hydrogen, high pressure liquefiable gases and dissolved acetylene gases) - Code of practice |
Gr 7 |
|
IS
15449 (Part 3) : 2004 |
Household
zig-zag sewing machine Head Part 3 Sewing requirements |
Gr 1 |
|
IS
15449 (Part 4) : 2004 |
House
hold zig-zag sewing machine Head Part 4
Durability requirements |
Gr 1 |
|
IS
15475 (Part 2) : 2004 |
Code
of recommended practice for Amusement rides safety Part 2 Safety requirements
|
Gr 2 |
|
IS
15475 (Part 3) : 2004 |
Code
of recommended practice For amusement rides safety Part 3 Design, manufacture and Erection. |
Gr 4 |
|
IS
15475 (Part 4) : 2004 |
Code
of recommended practice for Amusement rides safety Part 4 Selection, training and Supervision of operators |
Gr 1 |
|
IS
15475 (Part 5) : 2004 |
Code
of recommended practice For amusement rides safety Part 5 Operation and
maintenance Procedures |
Gr 4 |
|
IS
15475 (Part 6) : 2004 |
Code
of recommended practice For amusement rides safety Part 6 Performance tests |
Gr 2 |
|
MEDICAL INSTRUMENTS, GENERAL AND PRODUCTUION ENGINEERING |
||
|
IS
4696 (Part 3) : 2004 |
Dimensions
for metric buttress Threads Part
3 Basic dimensions(Second revision) |
Gr 4 |
|
IS
6623 : 2004 |
High
strength structural nuts -- Specification (Second revision) |
Gr 3 |
|
IS
15511 : 2004 ISO 9633 : 2001 |
Cycle
chains -- Characteristics and test
methods |
Gr 7 |
|
MANAGEMENT AND SYSTEM |
||
|
IS
6200 (Part 2) : 2004 |
Statistical
tests of significance Part 2 x TEST (Second revision) |
Gr 5 |
|
IS
15446 (Part 5) : 2004 |
Guide
to production control Part 5 Relationship between Production control and
other management function |
Gr 9 |
|
IS
15446 (Part 6) : 2004 |
Guide
to production control Part 6 Computer aided production Control |
Gr 8 |
|
PETROLEUM, COAL AND RELATED PRODUCTS |
||
|
IS
1448 [P : 15] : 2004 ISO 2160 : 1998 |
Methods
of test for petroleum and its products [P : 15] Petroleum products
Corrosiveness to copper Copper strip test (Third revision) |
Gr 6 |
|
IS
1448 [P : 23] ; 2004 ISO 3837 : 1993 |
Methods
of test for petroleum and its products [P : 23] Liquefied petroleum gases
Determination of hydrocarbon Types Fluorescent indicator Adsorption
method (Fourth revision) |
Gr 4 |
|
IS
1448 [P : 29] : 2004 ISO 6246 : 1995 |
Methods
of test for petroleum and its products [P : 29] Petroleum products Gum
Content of light and middle Distillate fuels Jet evaporation Method (Third revision) |
Gr 5 |
|
IS
1448[P : 71] : 2004 ISO 4256 : 1996 |
Methods
of test for petroleum and its products [ P : 71] Liquefied petroleum gases Determination
of gauge Vapour pressure LPG method (Second
revision) |
Gr 4 |
|
IS
13360(Part 6/Sec14):2004 |
Plastics
Methods of testing Part 6 Thermal properties Section 14 Standard test
method For coefficient of linear thermal Expansion of plastics between -30 C
and 30 C with a vitreous Silica dilatometer |
Gr 2 |
|
TRANSPORT ENGINEERING |
||
|
IS
7906 (Part 5) : 2004 |
Helical
compression springs Part 5 Hot coiled
springs made From circular section bars Specification (Second revision) |
Gr 4 |
|
IS
9435 : 2004 |
Terms
and definitions relating to Dimensions of road vehicles other Than 2 and 3 wheelers (First revision ) |
Gr 7 |
|
IS
15488 : 2004 ISO 15870 : 2000 |
Powered
industrial trucks -- Safety signs and hazard
pictorials General Principles |
Gr 11 |
|
TEXTILES |
||
|
IS
13629 : 2004 |
Textiles
machinery Stainless Steel drying cylinders used in textile Processing
Specification (First revision) |
Gr 2 |
|
WATER RESOURCES |
||
|
IS
15454 : 2004 |
Liquid
flow measurement in open Channels velocity-area method Using a restricted
number of verticals |
Gr 4 |
