|
दिसम्बर 2011 के दौरान निम्न नये व पुनीरीक्षित भारतीय मानक एवं संशोधन प्रकाशित हुए The following New and Revised Indian Standards and Amendments Published during December 2011 |
CIVIL ENGINEERING
IS 206:2010 Tee and Strap Hinges – Specifications Group 5
(fifth Revision)
Amendment No. 2 to Timber Panelled and Glazed Shutters – Gratis
IS 1003 (Pt 1):2003 Specification Part 1 Door Shutters (Fourth Revision)
CHEMICAL
Amendment No.1 to Glossary of Terms Relating to Paper and Pulp Gratis
IS 4261:2001 Based Packaging Materials (First Revision)
Amendment No.1 to Glossary of Terms used in Paper Trade and Gratis
IS 4661:1999 Industry (Second Revision)
Amendment No.5 to Methods of Sampling and Test for Paper and Gratis
IS 1060 (Pt 1):1966 Allied Products Part 1 (Revised)
ELECTRONICS AND INFORMATION TECHNOLOGY
Amendment No.3 to Methods of Determination of Efficiency of Gratis
IS 4889:1968 Rotating Electrical Machines
Amendment No.2 to Electric Traction Lifts Part 2 Code of Practice Gratis
IS 14665(Pt 2/Sec 1):2000 for Installation Operation and Maintenance
Section 1 Passenger and Goods Lifts
Amendment No.1 to Three-Phase Induction Motors for Use in Gratis
IS 14578:1999 Nuclear Power Plants - Specification
Amendment No.4 to Voltage Bands for Electrical Installations Gratis
IS 12360:1988 Including Preferred Voltages and Frequency
TRANSPORT ENGINEERING
Amendment No.1 to Bicycles Bottom Bracket Lock Ring – Gratis
IS 1134:2004 Specification (Third Revision)
WATER RESOURECES
Amendment No.1 to Glossary of Terms Relating to River Valley Gratis
IS 4410 (Pt 21):1987 Projects Part 21 Flood Control
Amendment No.2 to Recommendations for Grouting of Pervious Gratis
IS 4999:1991 soils (First Revision)
Amendment No.2 to Proformae for Reporting Progress of Benefits Gratis
IS 13142:1991 Created by River Valley Projects
ELECTRONICS AND INFORMATION TECHNOLOGY
IS 15866 (Pt 1):2010 Fixed Inductors for Electromagnetic Interference Gr. 10
IEC 60938-1:2006 Suppression Part 1 Generic Specification
IS/ISO/IEC 9796-2:2002 Information Technology – Security Techniques - Gr. 14
Digital Signature Schemes Giving Message
Recovery Part 2 Integer Factorization Based
Mechanisms
MECHANICAL ENGINEERING
IS/ISO 9488:1999 Solar Energy – Vocabulary Gr.8
(Superseding IS 12934:1990)
MEDICAL EQUIPMENT AND HOSPITAL PANNING
IS/ISO 8362-1:2003 Injection Containers and Accessories Part 1 Gr. 2
Injection Vials made of Glass Tubing
{Superseding IS 1984 (Pt 1):2003}
|
नवम्बर 2011 के दौरान निम्न नये व पुनीरीक्षित भारतीय मानक एवं संशोधन प्रकाशित हुए The following New and Revised Indian Standards and Amendments Published during November 2011 |
CIVIL ENGINEERING
Amendment No. 1 to Specification for Cold Formed Light Gauge Gratis
IS 811:1987 Structural Steel Sections (Second Revision)
Amendment No. 2 to Synthetic Resin Adhesives for Plywood Gratis
IS 848:2006 (Phenolic and Aminoplastic)-Specification
(Second Revision)
Amendment No. 3 to Timber Panelled and Glazed Shutters Gratis
IS 1003 (Pt 2):1994 Specification Part 2 Window and Ventilator
Shutters (Third Revision)
Amendment No. 2 to Block Boards – Specification Gratis
IS 1659:2004 (Fourth Revision)
Amendment No. 2 to Particle Boards of Wood and Other Gratis
IS 3087:2005 Lignocellulosic Materials (Medium Density)
For General Purposes – Specification
(Second Revision)
Amendment No.1 to Specification for Light Rails Gratis
IS 3964:1980 (First Revision)
Amendment No. 1 to Door Shutters- Methods of Tests Part 1 General Gratis
IS 4020(Pt 1):1998 (Third Revision)
Amendment No.1 to Door Shutters- Methods of Tests Part 2 Gratis
IS 4020 (Pt 2):1998 Measurement of Dimensions and Squareness
(Third Revision)
Amendment No.1 to Door Shutters- Methods of Tests Part 3 Gratis
IS 4020 (Pt 3):1998 Measurement of General Flatness
(Third Revision)
Amendment No.1 to Door Shutters- Methods of Tests Part 4 Gratis
IS 4020 (Pt 4):1998 Local Planeness Test (Third Revision)
Amendment No.1 to Door Shutters- Methods of Tests Part 7 Gratis
IS 4020 (Pt 7):1998 Edge Loading Test (Third Revision)
Amendment No.2 to Door Shutters- Methods of Tests Part 8 Gratis
IS 4020 (Pt 8):1998 Shock Resistance Test (Third Revision)
Amendment No.2 to Door Shutters- Methods of Tests Part 12 Gratis
IS 4020 (Pt 12):1998 Varying Humidity Test (Third Revision)
Amendment No.3 to Timber Door, Window and Ventilator Frames Gratis
IS 4021:1995 (Third Revision)
Amendment No.3 to Fire Retardant Plywood – Specification Gratis
IS 5509:2000 (Second Revision)
Amendment No.3 to Wood/Lignocellulosic Based Panel Products Gratis
IS 7683:1999 - Methods of Sampling (Second Revision)
Amendment No.2 to Method for Determination of Point Load Gratis
IS 8764:1998 Strength Index of Rocks (First Revision)
Amendment No.2 to Precast Concrete Blocks for Paving – Specification Gratis
Amendment No.4 to Laminated Veneer Lumber – Specification Gratis
Amendment No.2 to Diaphragm Type (Plastic Body) Float Operated Gratis
IS 13049:1991 Valves For Cold Water Services – Specification
Amendment No.1 to Method For Determination of Formaldehyde Gratis
IS 13745:1993 Content in Particle Board By Extraction Method
Called Perforator Method
CHEMICAL
Amendment No.2 to Bentonite For Ceramic Industry – Specification Gratis
Amendment No.1 to Toilet Cleaner, Liquid – Specification Gratis
IS 7983:1994 (First Revision)
ELECTROTECHNICAL
Amendment No.1 to Domestic Electric Clothes Washing Machines Gratis
IS 14115:1994 For Household Use - Specification
FOOD AND AGRICULTURAL
Amendment No.4 to Synthetic Food Colour – Preparations and Gratis
IS 5346:1994 Mixtures – Specification (Second Revision)
Amendment No.1 to Specification for Besan (First Revision) Gratis
IS 2400:1976 (First Revision)
Amendment No.2 to Specification for Rusks (First Revision) Gratis
Amendment No.1 to Roasted Bengal Gram Floor (CHANNA SATTU) Gratis
PETROLEUM, COAL AND RELATED PRODUCTS
Amendment No.1 to Methods of Test for Petroleum and Its Products Gratis
IS 1448(Pt 23):2004 Part 23 Liquefied Petroleum Gases – Determination
of Hydrocarbon Types – Fluorescent Indicator
Adsorption Method (Fourth Revision)
Amendment No.1 to Methods of Test for Petroleum and Its Products Gratis
IS 1448(Pt 43):1991 Part 43 Bromine Number by Colour Indicator Method
(Second Revision)
Amendment No.1 to Polyethylene Flexible Pouches For The Packing Gratis
IS 15609:2005 of Natural Mineral Water And Packaged Drinking
Water - Specification
Amendment No.4 to Specification For High Density Polyethylene Gratis
IS 9754:1981 Containers For Packing of Liquid Pesticides
(Up to 1 Litre Capacity)
MECHANICAL ENGINEERING
Amendment No.5 to Welded Low Carbon Steel Cylinders Exceeding Gratis
IS 3196 (Pt 1):2006 5 Litre Water Capacity For Low Pressure Liquefiable
Gases Part 1 Cylinders for Liquefied Petroleum Gases
(LPG)- Specification (Fifth Revision)
Amendment No.3 to Refillable Seamless Steel Gas Cylinders – Gratis
IS 7285 (Pt 2):2004 Specification Part 2 Quenched and Tempered Steel
Cylinders with Tensile Strength Less Than 1 100
MPa (112 kgf/mm2 ) (Third Revision)
MEDICAL EQUIPMENT AND HOSPITAL PANNING
Amendment No.2 to Specification for Trolley, Dressing Gratis
METALLURGICAL ENGINEERING
Amendment No 4 to Cold Rolled Non-Oriented Electrical Steel Gratis
IS 648:2006 Sheet and Strip – Fully Processed Type –
Specification (Fifth Revision)
Amendment No 1 to Malleable Cast Iron Pipe Fittings – Specification Gratis
IS 1879:2010 (Third Revision)
WATER RESOURSES
Amendment No.2 to Guidelines For Lining of Canals in Expansive Gratis
IS 9451:1994 Soils (Second Revision)
WITHDRAWN STANDARDS
FOOD AND AGRICUATRAL
IS 2885 :1975 ‘Specification for Frozen Frog Legs (first revision)’
|
अक्टूबर 2011 के दौरान निम्न नये व पुनीरीक्षित भारतीय मानक एवं संशोधन प्रकाशित हुए The following New and Revised Indian Standards and Amendments Published during October 2011 |
TRANSPORT ENGINEERING
Amendment No. 3 to Specification for Performance of Small Size Spark Gratis
IS 7347:1974 Ignition Engines for Agricultural Water Pumps,
Sprayers, Tillers Reapers and other Similar
Applications
Amendment No. 1 to Automotive Vehicles – Brake Hose Assemblies For Gratis
IS 7079:2008 Hydraulic Braking Systems Used With Non-Petroleum
Base Brake Fluid – Speciation (Third Revision)
ELECTROTECHNICAL
Amendment No. 3 to Electric Traction Lifts Part 4 Components Section Gratis
IS 14665(Pt 4/Sec 3):2001 3 Lift Carframe, Car Counterweight and Suspension
Amendment No. 4 to Electric Traction Lifts Part 4 Components Section Gratis
IS 14665(Pt 4/Sec 6):2001 6 Lift Doors, Locking Devices and Contacts
Amendment No. 1 to Surge Arrestors Part 1 Non-Liner Resistor Type Gratis
IS 15086 (Pt 1):2001/ Gapped Surge Arrestors for a.c. Systems
IEC 60099-1(1991)
Amendment No. 6 to Electrical Irons – Specification Gratis
Is 366:1991 (Fourth Revision)
Amendment No. 5 to Plugs and Socket-Outlets of Rated Voltage up Gratis
IS 1293:2005 To and Including 250 Volts and Rated Current
Up to 16 Amperes – Specification
(Third Revision)
PETROEUM, COAL AND RELATD PRODUCTS
Amendment No. 1 to Methods of Test for Coal and Coke Part 4 Ultimate Gratis
IS 1350(Pt 4/Sec 1):1974 Analysis Section 1 Determination of Carbon and
Hydrogen (First Revision)
METALLURGICAL ENGINEERING
Amendment No. 2 to Recommendations for Manual Tungsten Inert-Gas Gratis
IS 2812:1993 Arc Welding of Aluminum and Aluminum Alloys
(First Revision)
CHEMICAL
Amendment No. 1 to Plaster of Paris for Ceramic Industry – Specification Gratis
IS 2333:1992 (Second Revision)
Amendment No. 3 to Specification for Stoneware Containers for General Gratis
IS 2838:1964 Purposes
Amendment No.4 to Specification for Industrial Stoneware Gratis
WITHDRAWAN STANDARDS
Nil
|
सितम्बर 2011 के दौरान निम्न नये व पुनीरीक्षित भारतीय मानक एवं संशोधन प्रकाशित हुए The following New and Revised Indian Standards and Amendments Published during September 2011 |
CHEMICAL
IS 15844:2010 Sports Footwear - Specification Gr 10
ELECTROTECHNICAL
IS/IEC 61241-2-1: 1994 Electrical Apparatus for use in the Presence of Gr 10
Combustible Part 2 Test Methods Section 1 Method
For Determining the Minimum Ignition Temperatures
(Superseding IS 12315 (Part 2):1988)
Amendment No 4 to Motors for Submersible Pump sets – Specification Gratis
IS 9283:1995 (First Revision)
Amendment No3 to Conduit Systems for Electrical and Communication Gratis
IS 14930 (Part 1):2001 Installation Part 1 General Requirements
Amendment No 2 to Conduit Systems for Electrical and Communication Gratis
IS 14930 (Part 2):2001 Installation Part 2 Particular Requirements for Conduit
System Buried Underground
Amendment No 3 to Bayonet Lamp holders (Fourth Revision) Gratis
Amendment No6 to Switches for Domestic and Similar Purposes- Gratis
IS 3854:1997 Specification (Second Revision)
ELECTRONICS AND INFORMATION TECHNOLOGY
IS 13252 (Pt 1 ):2010 Information Technology Equipment – Safety Rs. 2970
IEC 60950-1:2005 Part 1 General Requirement (Second Revision)
MEDICAL EQUIPMENT AND HOSPITAL PANNING
IS 13450 (Pt 1/Sec 4):2009 Medical Electrical Equipment Part 1 Gr 10
General Requirement for Safety Section 4
Collateral Standard: Programmable Electrical
Medical Systems
METALLURGICAL ENGINEERING
IS 1148 : 2009 Steel Rivet Bars (Medium and High Tensile) for Gr 2
Structural purposes (Fourth revision)
(Superseding IS 1149:1982)
IS 1528(P-3):2010 Methods of Sampling and Physical Tests for Refractory Gr 1
Materials Part 3 Determination of Spalling Resistance
(Third Revision)
IS 6016:2009 Gas Welding Equipment – Hose Connections for Gr 4
ISO 3253:1998 Equipment for Welding, Cutting and Allied Processes
(Second Revision)
IS 4029:2010 Guide for Testing Three Phase Induction Motors Gr 11
(First Revision)
Amendment No1 to Design and Construction of Box Type Forging Gratis
IS 9977:1988 Furnaces – Guidelines (First Revision)
TRANSPORT ENGINEERING
IS 15445:2010 Ships and Marine Technology-Identification Gr 7
ISO 14726:2008 Colours for the Content of Piping Systems
(First Revision)
WITHDRAWN STANDARDS
Nil