BUREAU OF INDIAN STANDARDS

List of all IS specific circulars

Sl No Department Note/Circular No Title of the Doc Date of Posting Last Date for Comments
1   CMD-II (Leg)   STI-2185(P-3)   STI-2185(P-3)   27-8-2014    
2   CMD-II (Leg)   CMD-II/16:12269   Implementation of Revised STI for IS 12269:2013 (53 Gr OPC)   27-8-2014    
3   CMD-II (Leg)   CMD-Legal /1   Amendment No. 35 to Operating Manual for Product Certification 2004   25-8-2014    
4   CMD-II (Leg)   CMD-Legal /1   Amendment No. 33 to Operating Manual for Product Certification 2004   22-8-2014    
5   CMD-II (Leg)   .   Revision of IS 14543:2004   21-8-2014    
6   CMD-II (Leg)   FAD 14 (2660) F   Revision of IS 14543:2004   14-8-2014    
7   CMD-II (Leg)   CMD-II/16:13592   Implementation of STI for revised Indian Standard Specification IS 13592:2013 for Unplasticised Polyvinyl Chloride (PVC-U) Pipes For Soil And Waste Discharge System For Inside And Outside Buildings Including Ventilation And Rain Water System   14-8-2014    
8   CMD-II (Leg)   CMD-II/16:9573   STI for revised Indian Standard Specification IS 9573:2012 for RUBBER HOSE FOR LIQUEFIED PETROLEUM GAS (LPG).   13-8-2014    
9   CMD-I   CMD-I(BD)/G-5   Farewell to Shri Vijay Kumar Chopra, P.S.   13-8-2014    
10   CMD-III   CMD-III/16:1238   Implementation of revised IS 1238:2005 Hurricane Lanterns and revised STI's (Doc:STI/1238/2 July 2005)   8-8-2014    
11   CMD-III   CMD-III/16:848   Implementation of revised IS 848: 2006 Synthetic Resin Adhesives for Plywood (Phenolic and Aminoplastic) - Specification   8-8-2014    
12   CMD-III   CMD-III/16:5456   Implementation of revised standard IS 5456:2006 for Positive Displacement Type Air Compressors and Exhausters and Revised Doc: STI/5456/3 September,2007   8-8-2014    
13   CMD-II (Leg)   STI/14203/1   Finalization and Implementation of STI for IS 14203:1999, Specification for Fire Resisting Record Protection Cabinets.   8-8-2014    
14   CMD-II (Leg)   STI/10238/1   Finalization and Implementation of STI for IS 10238:2001, Specification for Fasteners-Threaded Steel Fastner-Step bolts for steel structures   8-8-2014    
15   CMD-II   CMD-II/16:13801   STI for revised Indian Standard Specification IS 13801:2013 for CHEQURED CEMENT CONCRETE TILES.   8-8-2014    
16   CMD-II (Leg)   CMD-II/16: 13258   Subject: Guidelines for switching over to IS 13258:2014, Welded low carbon steel cylinders exceeding 5 litres W.C. for low pressure liquefiable gas- Requirements for inspection and reconditioning of used LPG cylinders – specification   7-8-2014    
17   CMD-II (Leg)   CMD-II(Legal)/1   Proposals forwarded by BOs including situations not covered in OMPC   7-8-2014    
18   CMD-II (Leg)   CMD-II/16:1664   Arrangement for Testing Cu,Fe,Zn and Mn in Mineral Mixture for Cattle   7-8-2014    
19   CMD-II (Leg)   CMD-II/16: 15962   Tentative MF,STI for IS 15962-2012   5-8-2014    
20   CMD-II (Leg)   CMD-II/16: 418   Implementation of Amendment No 5 January 2014 to IS 418:2004 Tungsten Filament Lamps for Domestic and Similar General Lighting Purpose - Specification.   5-8-2014    
21   CMD-II (Leg)   CMD-II/16: 15962   Tentative MF,STI for IS 15962-2012   5-8-2014    
22   CMD-II (Leg)   BIS/DGO(404 )/2014   Product Manuals   31-7-2014    
23   CMD-II (Leg)   CMD-II/16: 9206   Implementation of Amendment No 5 January 2014 to IS 9206:1979 Dimension of Caps for Tungsten Filament General Service Electric Lamps - Specification   30-7-2014    
24   CMD-II (Leg)   CMD-II/16: 1258   Implementation of Amendment No 4 December 2013 to IS 1258:2005 Bayonet Lamp holders - Specification   30-7-2014    
25   CMD-II (Leg)   CMD-II/16: 1293   Implementation of Amendment No 6 December 2013 to IS 1293:2005 Plugs and Socket-Outlets of Rated Voltage up to and Including250 Volts and Rated Current up to and Including 16 Amperes - Specification   30-7-2014    
26   CMD-II (Leg)   CMD-II/16: 3854   Implementation of Amendment No 7 December 2013 to IS 3854:1997 Switches for Domestic and Similar Purposes - Specification   30-7-2014    
27   CMD-II (Leg)   CMD-II/16: 8034   Implementation of Amendment No 3 December 2013 to IS 8034:2002 Submersible Pumpsets - Specification   30-7-2014    
28   CMD-II (Leg)   CMD-Legal /1   Amendment No. 32 to Operating Manual for Product Certification 2004   28-7-2014    
29   CMD-II (Leg)   CMD -II/Legal/16:325   Switch-over of BIS licences held for IS 325:1996 to IS 12615:2011 –Reg.   28-7-2014    
30   CMD-II (Leg)   CMD-II/16: 14220   Implementation of Amendment No 6 December 2013 to IS 14220:1994 - Openwell Submersible Pumpsets - Specification   28-7-2014    
31   CMD-II (Leg)   CMD-II/16: 14587   Implementation of Amendment No 6 to IS 14587:1995   25-7-2014    
32   CMD-II (FCT)   CMD-II/16:8442   STI for revised Indian Standard Specification IS 8442:2008 for STAND POST TYPE WATER AND FOAM MONITOR FOR FIRE FIGHTING.   25-7-2014    
33   CMD-II (Leg)   CMD-II/16   Implementation of Amendment No 5 to IS 14276:1995   24-7-2014    
34   CMD-II (Leg)   CMD-II/16:2339   STI for revised Indian Standard Specification IS 2339:2013 for ALUMINIUM PAINTS FOR GENERAL PURPOSES.   22-7-2014    
35   CMD-II (Leg)   STI/1005/4   STI 1005   22-7-2014    
36   CMD-II (Leg)   CMD-II/16: 13258   Notification of date of establishment of IS13258:2014   21-7-2014    
37   CMD-II (Leg)   CMD-II/16:285   AMENDMENT NO. 5 FEBRUARY 2014 TO IS 285 : 1992 LAUNDRY SOAPS — SPECIFICATION   18-7-2014    
38   CMD-II (FCT)   CMD-II/16:2339   Draft STI for revised Indian Standard Specification IS 2339:2013 for ALUMINIUM PAINTS FOR GENERAL PURPOSES   18-7-2014    
39   CMD-II (Leg)   CMD-II/16:9573   Implementation of IS: 9573: 2012   18-7-2014    
40   CMD-II (Leg)   BIS/DGO(402)/2014   Order for implementing Grant of licence for products under Normal & Simplified procedures.   17-7-2014    
41   CMD-II (Leg)   BIS/DGO(401)/2014   Adherence to time norms for Grant of BIS Certification Marks licence   16-7-2014    
42   CMD-II(Leg)   CMD-II(Legal)/2   Amendment to Simplified procedure for Grant of licence - Testing laboratories/Test reports including partial test reports/testing (factory /for long duration tests) -regarding.   10-7-2014    
43   CMD-II (Leg)   CMD-2(Legal)/4   scope of licence in CMMS for proper reflection   10-7-2014    
44   CMD-II (Leg)   BIS/DGO(397)/2014   Guidelines for concession on Minimum Marking Fee during period of suspension or voluntary declaration of stoppage of marking   9-7-2014    
45   CMD-II (Leg)   CMD-II (Legal)/16:4990   Implementation of revised STI for IS 4990:2011   9-7-2014    
46   CMD-II   CMD-II/16: 14561   Implementation of Amendment No 1, September 2013 to IS 14561:2007 Fire Resisting (Insulating) Filing Cabinets - Specification.   7-7-2014    
47   CMD-II   CMD-II/16: 7285(Part 1)   Implementation of Amendment No 2, December 2013 to IS 7285 (Part 1):2004 Refillable Seamless Steel Gas Cylinders - Specification.   7-7-2014    
48   CMD-II   CMD-II/16: 14106   Implementation of Amendment No 5, December 2013 to IS 14106:1996 Direct Action Hand pumps - Specification.   7-7-2014    
49   CMD-II   CMD-II/16:6595(Part 1)   Implementation of Amendment No 3, March 2014 to IS 6595 (Part 1):2002 Horizontal Centrifugal Pumps for Clear, Cold Water - Specification.   7-7-2014    
50   CMD-II   CMD-II/16: 15490   Implementation of Amendment No 4 February 2014 to IS 15490:2004 Cylinders for on Board Storage of Compressed Natural Gas as a Fuel for Automotive Vehicles - Specification.   7-7-2014    
51   CMD (FCT)   STI/14184/1   Scheme of Testing and Inspection for Certification of Cartap HydroChloride G according to IS-14184:1994   3-7-2014    
52   CMD (FCT)   STI/2074/5   Scheme for testing and Inspection for Certification for Ready Mixed Plant, Air Drying, Red Odxde - Zinc Chrome, Priming according to IS:2074-1992 (Second Revision)   3-7-2014    
53   CMD   CMD-2/Legal/16:12615   Concurrent running of IS12615:2004 and IS 12615:2011 for Energy efficient Induction Motors-Three Phase Squirrel Cage   21-6-2014    
54   CMD-I   CMDa/H:8737   Valve fitting for use with LPG Cylinders   20-6-2014    
55   CMD-I   CMD-I/16:3196   Lot size of prototype LPG cylinders to be offered for considering grant of licence/inclusion of additional varieties as per IS 3196   20-6-2014    
56   CMD I   CMD-3116:5986   Implementation of revised IS 5986:2011 "Hot Rolled Steel Flat Products for Structural Forming and Flanging Purposes" and STI (Doc: STI/5986/4, January 2013)   20-6-2014    
57   DDG (Cert.)   SCGC/SDoC   Regional level Meets before launching SDoC schemes   19-6-2014    
58   CMD-FCT   CMD-FCT181   Revision of Marking Fee Rates for 9 Products covered under Certification Marks Scheme of BIS   17-6-2014    
59   CMD   BIS/DGO (388)/2014   Orders of DG for Implementation of Tatkal Registration under "Self-Declaration of Conformity" Assessment Scheme   13-6-2014    
60   CMD-II   CMD-II (Legal)/ 16:14543   Regarding Issue of Stop Marking   10-6-2014    
61   CMD-II   CMD-2 (Legal)/16:3196 (Part 1)   Actions to be taken in case of First Fill Leakage of LPG Cylinders   10-6-2014    
62   CMD-II   CMD-2 (Legal)/16:3196 (Part 1)   Grant of Licence/Inclusion of varieties for Welded Low Carbon Steel Cylinders exceeding 5 ltr water capacity for low pressure liquefiable gases as per IS 3196 (Part 1).   10-6-2014    
63   CMD-MCM   CMD (MCM)/16:3196(Part 1)   Lot Inspections   26-5-2014    
64   CMD-FCT   CMD-FCTWater Manual   Comments invited on Water Manual   21-5-2014    
65   CMD-EEE   STI/9283/5   STI for IS 9283   20-5-2014    
66   CMD-FCT   CMD-FCT/Amendment No.31 to OMPC 2004   Amendment No.31 to Operating Manual for Product Certification 2004   9-5-2014    
67   CMD-FCT   CMD(FCT)/G-1(F)   Modified Annex I & II to BIS/DGO (367)/2014 April 2014 - Categorization   29-4-2014    
68   CMD-FCT   CMD-FCT/Amendment No.30 to OMPC 2004   Amendment No.30 to Operating Manual for Product Certification 2004   29-4-2014    
69   CMD(MCM)   CMD(MCM)/IS 3196 (Part 1)   Grant of Licence for Welded Low Carbon Steel Cylinders Exceeding 5 Litre Water Capacity for Low Pressure Liquefiable Gases as per IS 3196 (Part 1)   28-4-2014    
70   CMD-EEE   CMD3/16:8034   Grouping Guidelines for Submersible Pump sets as per IS 8034   24-4-2014    
71   CMD-EEE   STI 1180 (Part 2)/1April 2014   SCHEME OF TESTING AND INSPECTION FOR OUTDOOR TYPE THREE PHASE DISTRIBUTION TRANSFORMERS UP TO AND INCLUDING 100kVA 11kV SEALED TYPE ACCORDING TO IS 1180 (Part 2):1989   17-4-2014    
72   CMD-EEE   STI 1180 (Part 1 )/3April 2014   SCHEME OF TESTING AND INSPECTION FOR OUTDOOR TYPE THREE PHASE DISTRIBUTION TRANSFORMERS UP TO AND INCLUDING 100kVA 11kV NONSEALED TYPE ACCORDING TO IS 1180 (Part 1):1989   17-4-2014    
73   CMD-EEE   CMD(EEE)/16: 3196   STI according to IS 3196 (Part 1):2013   17-4-2014    
74   CMD-FCT   CMD-FCT/Amendment No.29 to OMPC 2004   Amendment No.29 to Operating Manual for Product Certification 2004   17-4-2014    
75   CMD-FCT   BIS/DGO( 367 )/2014   Orders of DG for implementation of Categorization of Licences   17-4-2014    
76   CMD-FCT   CMD-FCT/Amendment No.28 to OMPC 2004   Amendment No.28 to Operating Manual for Product Certification 2004   11-4-2014    
77   CMD-EEE   CMD-EEE/16:325   Withdrawal of IS 325 :1996   3-4-2014    
78   CMD-III   CMD-3/16:12615   Implementation of IS 12615:2011 'Energy efficient Induction Motors - Three Phase Squirrel Cage and STI (Doc: STI/12615/3 Sept 2013)   3-4-2014    
79   CMD (EEE)   CMD-3/16:12615   Implementation of IS 12615:2011   2-4-2014    
80   CMD-II   STI/15757/1   STI for IS 15757:2007.   26-3-2014    
81   CMD-II   CMD-II/16:2339   Draft STI for revised Indian S tandard Specification IS 2339:2013 for ALUMINIUM PAINTS FOR GENERAL PURPOSES —SPECIFICATION.   26-3-2014    
82   CMD-II   CMD-II/16:133   Implementation of revised STI for IS 133(Part 1) :2013 for ENAMEL, INTERIOR:(a) UNDERCOATING (b) FINISHING — SPECIFICATION PART 1 FOR HOUSEHOLD AND DECORATIVE PURPOSES.   26-3-2014    
83   CMD-II   CMD-II/16:428   Implementation of revised STI for IS 428:2013 for WASHABLE DISTEMPER — SPECIFICATION.   26-3-2014    
84   CMD-FCT   CMD-II/16:2933 (Part 1)   Implementation of revised STI for IS 2933 (Part 1):2013 for ENAMEL, EXTERIOR: (a) UNDERCOATING (b) FINISHING — SPECIFICATION PART 1 FOR DOMESTIC AND DECORATIVE APPLICATIONS.   21-3-2014    
85   CMD-FCT   CMD-II/16:252   Implementation of revised STI for IS 252: 2013 for Caustic Soda.   21-3-2014    
86   CMD-FCT   CMD-II/16:5410   Implementation of revised STI for IS 5410:2013 for Cement Paint.   21-3-2014    
87   CMD-FCT   CMD-II/16:427   Implementation of revised STI for IS 427:2013 for DISTEMPER, DRY, COLOUR AS REQUIRED —SPECIFICATION   21-3-2014    
88   CMD-FCT   CMD-II/16:15489   Implementation of revised STI for IS 15489 :2013 for Paint Plastic Emulsion - Specification   21-3-2014    
89   CMD-FCT   CMD-II/16:2932(Part 1)   Implementation of revised STI for IS 2932(Part 1):2013 for ENAMEL, SYNTHETIC,EXTERIOR:(a) UNDERCOATING (b) FINISHING — SPECIFICATION; PART 1 FOR DOMESTIC AND DECORATIVE APPLICATIONS.   21-3-2014    
90   CMD-FCT   CMD-FCT/Amendment No.27 to OMPC 2004   Amendment No.27 to Operating Manual for Product Certification 2004   21-3-2014    
91   CMD-EEE   CMD(EEE)/G-42   Scheme of Testing and Inspection for All India First Licence   14-3-2014    
92   CMD-FCT   BIS/DGO( 355 )/2014   Amendment to Simplified procedure for Grant of licence - category of laboratories & exclusion of Chartered Engineer-regd   12-3-2014    
93   CMD-FCT   BIS/DGO( 354)/2014   Policy on Delivery of Factory Samples   12-3-2014    
94   CMD-FCT   BIS/DGO(353)/2014   Positive approach towards industries –regd   12-3-2014    
95   CMD (EEE)   STI-1180(Part-I)/2   STI for certification of Distributoin Transformers UPTO and INCLUDING 100 KVA 11 KV According to IS:1980 (Part I)-1989 Non Sealed Type   7-3-2014    
96   CMD-FCT   CMD(FCT)/4:1   Clarification - Delegation of Powers for Product Certification and Registration Work (Revised)-regd   7-3-2014    
97   CMD-3   STI/13592/3   STI Unplasticized Polyvinyl Chloride (PVC-U) pipes for soil and Waste Discharge System for inside and Outside buildings including ventilation and rain water system according to IS 13592:2013   4-3-2014    
98   CMD 3   CMD 3/16:13592   Grouping Guidelines according to IS 13592 : 2013,"Unplasticized Polyvinyl Chloride (PVC-U) pipes for soil and Waste Discharge System for inside and Outside buildings including ventilation and rain water system- specification (First Revision)   4-3-2014    
99   CMD-FCT   BIS/DGO( 351 )/2014   Fixation of Marking Fee for All India First Licences   28-2-2014    
100   CMD(EEE)   STI/12269/Pack/3   STI for certification of Packing of ordinary Portland Cement, 53 Grade at Bulk Cement Terminal According to IS 12269:2013 (First Revision)   25-2-2014    
101   CMD (EEE)   CMD3/16:1239(Part1)   Guidelines for exiting licences of steel tubes who wish to outsource post black pipe operation   25-2-2014    
102   CMD-III   CMD3/16:1993   Grouping Guidelines for cold reduced electrolytic tinplate as per IS 1993:2006   24-2-2014    
103   STI   STI/4990/6   Scheme of Testing and Inspection for Certification of plywood for concrete shuttering works according to IS 4990:2011(Third Revision)   24-2-2014    
104   STI   STI/12269/2   Scheme of Testing and Inspection for Certification of ordinary portland cement,53 Grade according to IS 12269:2013(First Revision)   24-2-2014    
105   STI   STI/13801/2   Scheme of Testing and Inspection for Certification of chequered cement concrete tiles,according to IS 13801:2013(First Revision)   24-2-2014    
106   STI   STI/12269/LS/2   Scheme of Testing and Inspection for Certification of ordinary portland cement,53 Grade according to IS 12269:2013(First Revision)   24-2-2014    
107   STI   STI/8442/2,January 2014   Scheme of Testing and Inspection for Certification of standpost type water and foam monitor for fire fighting according to IS 8442:2008 (First Revision)   24-2-2014    
108   CMD-II   BIS/DGO( 346)/2014   Orders of DG for implementation of Grant of Licence for products under Normal and Simplified Procedure   21-2-2014    
109   CMD-EEE   CMD(EEE)/16:16088   Implementation of Scheme of Testing and Inspection for Certification of Chorinated Polyvinyl Chloride(CPVC)Pipes for Automatic Sprinkler Fire Extinguisher System according to IS 16088:2012 [Doc:STI/16088/1,October 2013]   21-2-2014    
110   CMD-FCT   BIS/DGO( 341 )/2014   Orders of DG for implementation of Tatkal Licensing Scheme   20-2-2014    
111   CMD-FCT   CMD-FCT/4:1   Delegation of Powers for Product Certification and Registration Work (Revised)   20-2-2014    
112   CMD-FCT   CMD-FCT/ Amendment No 26 to OMPC 2004   Amendment No 26 to Operating Manual for Product Certification 2004   20-2-2014    
113   CMD-III   CMD3/16:1786   Guidelines for permitting Centralised Testing Facilities for Steel Re-rollers   19-2-2014    
114   SRO.   60/CM 1   Preparation & Review of Product Manuals for Product Certification   19-2-2014    
115   CMD-III   CMD31616088   Grouping guidelines for Chlorinated Polyvinyl Chloride(CPVC)Pipes for Automatic Sprinkler Fire Extinguishing System as per IS 16088:2012   19-2-2014    
116   CMD-EEE   CMD(EEE)/16:15961   Implementation of Scheme of Testing and Inspection for Hot Dip Aluminium Zinc Alloy Metallic Coated Steel and Sheet(Plain)according to IS 15961:2012[Doc:STI/15961/1,January 2014]   18-2-2014    
117   CMD-II   CMD-FCT/ Amendment No 25 to OMPC   Amendment no. 25 to Operating Manual for Product Certification 2004   14-2-2014    
118   CMD-II   CMD-II/16:15489   Draft STI for revised Indian Standard Specification IS 15489 :2013 for Paint Plastic Emulsion - Specification   5-2-2014    
119   CMD-II   CMD-II/16:252   Draft STI for revised Indian Standard Specification IS 252 :2013 for Caustic Soda Indian Standard Specification for Caustic Soda, Pure & Technical as per IS 252:1991 has been revised as IS 252 :2013 for Caustic Soda — SPECIFICATION.   5-2-2014    
120   CMD-II   CMD-II/16:2933   Draft STI for revised Indian Standard Specification IS 2933: 2013 for ENAMEL, EXTERIOR: (a) UNDERCOATING (b) FINISHING — SPECIFICATION PART 1 FOR DOMESTIC AND DECORATIVE APPLICATIONS.   5-2-2014    
121   CMD-(FCT)   CMD-II/16:5410   Draft STI for revised Indian Standard Specification IS 5410:2013 for Cement Paint- Specification   3-2-2014    
122   CMD-(FCT)   CMD-II/16:2932   Draft STI for revised Indian Standard Specification IS 2932:2013 for ENAMEL, SYNTHETIC, EXTERIOR:(a) UNDERCOATING (b) FINISHING — SPECIFICATION; PART 1 FOR DOMESTIC AND DECORATIVE APPLICATIONS   3-2-2014    
123   CMD-(FCT)   CMD-II/16:2339   Draft STI for revised Indian Standard Specification IS 2339:2013 for ALUMINIUM PAINTS FOR GENERAL PURPOSES — SPECIFICATION.   3-2-2014    
124   CMD-(FCT)   CMD-II/16:428   Draft STI for revised Indian Standard Specification IS 428:2013 for WASHABLE DISTEMPER — SPECIFICATION.   3-2-2014    
125   CMD-(FCT)   CMD-II/16:427   Draft STI for revised Indian Standard Specification IS 427:2013 for DISTEMPER, DRY, COLOUR AS REQUIRED —SPECIFICATION   3-2-2014    
126   CMD-(FCT)   CMD-II/16:133   Draft STI for revised Indian Standard Specification IS 133(Part 1) :2013 for ENAMEL, INTERIOR: (a) UNDERCOATING (b) FINISHING — SPECIFICATION PART 1 FOR HOUSEHOLD AND DECORATIVE PURPOSES.   3-2-2014    
127   CMD-II   CMD-II/16   Revision of Indian Standards; IS 133, IS 427, IS 428, IS 2339, IS 2932, IS 5410,IS 12744, IS 15489 , IS 252 & IS 7742   28-1-2014    
128   CMD-I   CMD (MCM) / FMCS Policy   Procedure for Grant of Licence under FMCS   28-1-2014    
129   CMD-I   CMD-1/G-1:1   Rescheduling of Farewell function of Shri P.K. Gambhir, Sc.G & Chief (Certification)   24-1-2014    
130   CMD-II   CMD-II/16:1664   Testing of Freedom from spores of Bacillus Anthracis a per IS 1664:2002   23-1-2014    
131   CMD-II   CMD-II/IS 15298   Implementation of Scheme of Testing and Inspection (STI) Doc: STI/ IS 15298(Part 4)/ISO 20347, 1 January 2014 for Personal Protective Equipment Part 4- Occupational Footwear.   22-1-2014    
132   CMD-1   CMD-1/G-1:1   Farewell to Shri P.K. Gambhir, Sc.-G & Chief (Certification)   22-1-2014    
133   CMD-II   CMD-I/31   Amendment No 24 to Operating Manual for Product Certification   17-1-2014    
134   CMD-II   CMD-II/31:2   Amendment No 23 to OMPC-2004 [Related to list of fee to be Charged from applicant/licensee)   17-1-2014    
135   CMD-II   CMD-II/31   Amendment No 22 to OMPC-2004 [Related to deferment of renewal of licence   17-1-2014    
136   CMD-II   CMD-II/31   Amendment NO 20 & 21 to IOMPC 2004 (Related to file maintenance system for product certification and Simplification of process to include new varieties in the existing licenses)   17-1-2014    
137   CMD-III   STI/9523/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF DUCTILE IRON FITTINGS FOR PRESSURE PIPES FOR WATER, GAS AND SEWAGE ACCORDING TO IS 9523:2000(FIRST REVISION)   15-1-2014    
138   CMD-III   CMD3/16:2266   Grouping Guidelines for Steel Wire Ropes   1-1-2014    
139   CMD-III   CMD3/16:15911   Grouping Guidelines for Structural Steel as per IS 15911:2010   1-1-2014    
140   CMD-II   CMD-II/G-11 (PQ-460)   Lok Sabha Unstarred Question No.460   1-1-2014    
141   CMD-III   CMD -3/16:9283   Implementation of IS 9283:2013 'Motors for Submersible Pumpsets'   19-12-2013    
142   CMD-III   CMD-III/16:12235(Part 4)   Implementation of Amendment No 1, June 2013 to IS 12235(Part 4):2004, Thermoplastic pipes and Fitting - Method of test, Determining the detrimental effect on the composition of water   13-12-2013    
143   CMD-I   CMD-1/31   Issue of Test Request and Collection of Documents during Inspections by BIS Officers   12-12-2013    
144   CMD-II   CMD-II/16:1664   Scheme of Testing and Inspection (STI) Doc: STI/1664/8, November 2013 for Mineral Mixture for Supplementing Cattle Feeds as per IS 1664:2002.   12-12-2013    
145   CMD-II   CMD II/ 16: 4572   Guidelines for drawl of samples of Polyamide Multifilament Ropes (Hawser Laid and Plaited) as per IS : 4572 : 1992.   9-12-2013    
146   CMD-III   CMD-III/16:14399(part 1&2)   STI implementation   6-12-2013    
147   CMD-III   STI/14399(Pt 1)/2   STI FOR HOT PRESS MOULDED THERMOSETTING (GRP) SECTIONAL WATER STORAGE TANK ACCORDING TO IS 14399 (Part 1 &2) : 1996   6-12-2013    
148   CMD-II   CMD-II/PQ   Parliament Session   3-12-2013    
149   CMD-III   CMD-III/16:1237   Implementation of IS 1237:2012 for "Cement concrete flooring tiles" and STI (Doc:STI/1237,July 2013)   29-11-2013    
150   CMD-II   CMD-II/16: 15939   Implementation of Scheme of Testing & Inspection, Doc: STI/15939/1, September 2013 for BIFENTHRIN WP as per IS 15939:2011.   26-11-2013    
151   CMD-I   CMD-1/31   Modified system for recording of Application   25-11-2013    
152   CMD-III   CMD-III/16:7098(Part1)&7098(PartII)   Implementation of STIs as per IS 7098 (Part 1) & (Part 2)   21-11-2013    
153   CMD-III   CMD-3/16 : Cement   Grant of Licence for Cement – Decision Taken During DDGRs Meeting Held on 10 & 11 September 2013   21-11-2013    
154   CMD-II   CMD-II/16:1664   STI/1664/8,November 2013 for Mineral Mixture for Supplementing Cattle Feeds as per IS 1664:2002.   21-11-2013    
155   CMD-III   CMD-3/16:16102   Certification of Self Ballasted LED Lamps for General Engineering Services as per IS 16102 (Part 1 & 2): 2012   19-11-2013    
156   CMD-II   CMD-II/16:6046   STI/6046/1, November 2013 for GYPSUM FOR AGRICULTURAL USE ACCORDING TO IS 6046-1982.(Incorporating Amendment No.1 and 2)   18-11-2013    
157   CMD-II   CMD-II/G-5   Farewell to Smt. Bhupinder Kaur, A D (A & F), CMD-II   13-11-2013    
158   CMD-I   CMD-1/20:9   Calibration of Test Equipment from Accredited Calibration Laboratories   11-11-2013    
159   CMD-III   CMD-3/16 : Cement   Grant of Licence for Cement – Decision Taken During DDGRs Meeting Held on 10 & 11 September 2013   8-11-2013    
160   CMD-II   CMD-II/16:384 (Pt 1)   STI for revised specification IS 384 (Pt 1): 2012 for Brushes, Paints and Varnishes Flat Specification Part 1 Heavy Duty.   8-11-2013    
161   CMD-I   CMD-1/31   Modified System for Recording of Applications   31-10-2013    
162   CMD-III   CMD-3/16:2002   Grouping Guidelines for Steel Plate for Pressure Vessel for intermediate and high temperature service including boilers as per IS 2002: 2009   29-10-2013    
163   CMD-III   CMD-3/16:269   Implementation of Amendment No 1, July 2013 to IS 269:2013   25-10-2013    
164   CMD-III   CMD-3/16:3196   Consolidated Guidelines for Lot Inspection Charges for LPG Cylinders   24-10-2013    
165   CMD-III   CMD-3/16:6452   Implementation of Amendment No.5, July 2013 to IS 6452 : 1989   17-10-2013    
166   CMD-III   CMD-III/16:269   Implementation of IS 269:2013 for "Ordinary Portland cement, 33 Grade" and Scheme of testing and Inspection [(Doc: STI/269/6,August 2013), (Doc:STI/269/LS/2,Aug 2013) & Doc: STI/269/Pack/4,August 2013]   17-10-2013    
167   CMD-III   CMD-III/16:8042   Implementation of Scheme of Testing and Inspection for Certification of Packing of White Portland cement at bulk cement terminal as per IS 8042:1989 (Doc:STI/8042/pack/1, October 2013)   17-10-2013    
168   CMD-III   CMD-3/ General/ Lot Inspection   Lot Inspection Charges for LPG Cylinders, Valves and Regulators - (Amendment)   17-10-2013    
169   CMD-1   CMD-1/20-11   Revision of special Inspection Charges under Product Certification   15-10-2013    
170   CMD-III   CMD-3/ General/ Lot Inspection   Lot Inspection Charges for LPG Cylinders, Valves and Regulators   11-10-2013    
171   CMD-III   CMD 3/16:2830   STI/2830/5, July 2013   9-10-2013    
172   CMD-III   CMD3/16:2831   STI/2831/8, September 2013   9-10-2013    
173   CMD-III   CMD-III/16:8112   IS 8112 :2003 Ordinary Portland Cement, 43 Grade - Implementation of Finalized Schemes of Testing and Inspection [Doc:STI/8112/LS/2,August 2013] & [Doc:STI/8112/Pack/3,August 2013]   30-9-2013    
174   CMD-III   CMD 3/16:2831/16:2830   Guidelines for Permitting Centrallsed Testing Facilities for Induction Furnace Units   25-9-2013    
175   CMD-III   CMD-3/16:1786   Implementation of Amendment No 2, July 2013 to IS 1786:2008   17-9-2013    
176   CMD-III   CMD 3/16:2041   Grouping Guidelines for Steel Plates for Pressure Vessels Used at Moderate and Low Temperature as per IS 2041: 2009 for the purpose of considering grant of licence/Inclusion of additional varities   16-9-2013    
177   CMD-III   CMD 3/16:14246   Scheme of Testing and Inspection for continuously prepainted Galvanized steel sheets coils according to IS 14246:1995   12-9-2013    
178   CMD-III   CMD3/16:10748   Implementation of Grouping Guidelines for Hot Rolled Steel Strip for Welded Tubes and Pipes as per IS 10748 : 2004   6-9-2013    
179   CMD-III   CMD-3/16:15884   Implementation of STI [ Doc: STI/15884/1, Sep 2013 ]   6-9-2013    
180   CMD-III   CMD3/16:2062   Finalized Grouping Guidelines for Hot Rolled Medium and High Tensile Structural Steel as per IS 2062 : 2011   6-9-2013    
181   CMD-III   CMD-III/16:6003   Implementation of IS 6003:2010 for "Indented wire for Prestressed concrete" and STI(Doc: STI/6003/5, June 2013)   3-9-2013    
182   CMD-II   CMD-II/16: 915   Implementation of revised Indian Standard Specification IS 915:2012/ISO 1042:1998 LABORATORY GLASSWARE -ONE MARK VOLUMETRIC FLASKS & REVISED STI   27-8-2013    
183   CMD-II   CMD-II/Targets   Targets for ROs and BOs for 15 September 2013 and 30 September 2013   16-8-2013    
184   CMD -III   CMD -3/16:8112   Implementation of Amendment No 1, July 2013 to IS 8112:2013   31-7-2013    
185   CMD-II   CMD-II/16:133   Implementation of Amendment No 1, July 2013 to IS 133 : 2004 ENAMEL, INTERIOR: (a) UNDERCOATING (b) FINISHING — SPECIFICATION   30-7-2013    
186   CMD-II   CMD-II/LS PS - 19593   Lok Sabha Provisional starred Question D.No.19593 on PDW/PNMW   29-7-2013    
187   CMD-II   CMD-II/16:15489   Implementation of Amendment No. 1 for Paint, Plastic Emulsion- Specification, IS 15489 : 2004.   24-7-2013    
188   CMD-III   CMDIII/16:1729   Implementation of [ Doc: STI/1729/6, July 2013 ] (incorporating Amendment No.1 to 5) as per IS 1729: 2002 (Second Revision)   24-7-2013    
189   CMD-III   CMD-III/16:4031(Part 3,4,10,12,13,14)   Implementation of Amendment No 1, June 2013 to IS 4031(Part 3,4,10,12,13,14):1988 & IS 4031(Part 14): 1989, Methods of Physical test for Hydraulic cement.   24-7-2013    
190   CMD-III   STI/7620 (Part 1)/1   STI as per IS 7620 (Part 1) : 1996   24-7-2013    
191   CMD-II   CMD-II/16:14543 (PDW Manual)   Amendment No.1 to PDW Manual   23-7-2013    
192   CMD II   CMD II/16: 299   Implementation of revised STI & IS 299:2012, Alumino-Ferric   23-7-2013    
193   CMD-III   CMD-III/16:10701   Finalized Scheme of testing and Inspection Doc : STI/10701/1, June 2013 as per IS 10701:2012 for the product "Structural Plywood"   18-7-2013    
194   CMD-III   CMD-III/16:4151   Scheme of Testing and Inspection Doc : STI/4151/6 , July 2013 as per IS 4151:1993 for the product "Protective helmets for motor cycle riders"   17-7-2013    
195   CMD II   CMD II/ 16: 14929   Guidelines for drawl of samples of TEXTILES — HIGH STRENGTH POLYOLEFINS COPOLYMER ROPES as per IS : 14929 : 2001 to cover the ranges of sizes for grant of licence / inclusion in the licence   15-7-2013    
196   CMD-III   CMD-III/16:14856   Implementation of Scheme of Testing and Inspection for Certification of Glass Fiber rainforced plastic(GRP)panel type door shutters for internal use as per IS 14856:2000 (Doc:STI/14856/1,July 2013)   11-7-2013    
197   CMD-II   CMD-II/16:15757   Implementation of Amendment No.4 and Revised STI for Follow up formula - Complementary foods Specification as per IS 15757:2007   11-7-2013    
198   CMD-II   CMD-II/16:8707   Implementation of revised Indian Standard Specification IS 8707:2013 for Mancozeb, Technical.   10-7-2013    
199   CMD-II   CMD-II/Pesticides   Urgent Information required regarding pesticide licensees   10-7-2013    
200   CMD-III   STI/13592/2   STI for IS 13592 : 1992(Including Amendment No 1 to 5)   4-7-2013    
201   CMD-II   CMD-II/16:5346   Draft Amendment No. 5 to IS 5346:1994   4-7-2013    
202   CMD-II   CMD-II/16:8356   Draft Amendment No. 1 to IS 8356:1999   4-7-2013    
203   CMD-II   CMD-II/ FAD   Draft Indian Standard on IRON FORTIFIED IODIZED SALT (DOUBLE FORTIFIED SALT) FOOD GRADE   4-7-2013    
204   CMD-II   CMD-II/16:1144   Implementation of Amendment No. 2 and Revised STI for Cotton Cellular Shirting Specification as per IS 1144:1980   4-7-2013    
205   CMD-II   CMD-II/16:177   Implementation of Amendment No. 3 and Revised STI for Cotton Drill Specification as per IS 177:1989.   4-7-2013    
206   CMD-III   CMD-III/16:8112   Finalized Scheme of Testing and Inspection Doc:STI/8112/3,June 2013 as per IS 8112:2013 for the product "Ordinary Portland cement, 43 Grade"   2-7-2013    
207   CMD-III   CMD-III/16:10701   Fixation of Marking Fee for Structural Plywood as per IS 10701   28-6-2013    
208   CMD-III   CMD-III/16:14856   Fixation of Marking Fee for Glass Fibre Reinforced Plastic (GRP) Panel type door shutters for internal Use as per IS 14856   28-6-2013    
209   CMD-II   CMD-II/16:16008   Rate of Marking Fee for Certification of Agro Textiles Shade Nets for Agriculture and Horticulture Purposes   21-6-2013    
210   CMD-II   CMD-II/16:13488   Rate of Marking Fee for Certification of Irrigation Equipment – Emitting Pipes System   21-6-2013    
211   CMD-II   CMD-II/16:7903   Rate of Marking Fee for Certification of Tarpaulins made from High Density Polyethylene Woven Fabric   21-6-2013    
212   CMD -III   CMD 3/16:10748   Grouping Guidelines for hot rolled strips for welded tubes and pipes as per IS 10784:2004   21-6-2013    
213   CMD-III   CMD-3/16:15911   Implementation of STI as per IS 15911:2010   19-6-2013    
214   CMD-III   CMD-3/CRS/E&IT Goods   INVITATION   14-6-2013    
215   CMD-III   CMD-III/16:4031(Part 7)   Implementation of Amendment No 1, May 2013 to IS 4031(Part 7):1988,Methods of Physical tests for Hydraulic cement.   11-6-2013    
216   CMD-III   CMD-III/16:4031(Part 8)   Implementation of Amendment No 1, May 2013 to IS 4031(Part 8):1988,Methods of Physical tests for Hydraulic cement.   11-6-2013    
217   CMD-III   CMD3/16:1879   Implementation of Amendment No.3   6-6-2013    
218   CMD -III   CMD -3/16: 9537 (3)   Implementation of Amendment No.2 to IS 9537 (Part 3): 1983 Conduits for Electrical Installations: Part 3 Rigid Plain Conduits of Insulating Materials   4-6-2013    
219   CMD-II   CMD/16:16008   Agro Textiles – Shade Nets for Agriculture and Horticulture purpose   31-5-2013    
220   CMD-II   CMD-II/16:1144   Implementation of Amendment No.2 February 2013 and Revised STI of IS 1144:1980 Specification for Cotton Cellular Shirting.   29-5-2013    
221   CMD-II   CMD-II/16:8707   Implementation of revised specification IS 8707:2013 for Mancozeb,Technical   29-5-2013    
222   CMD-II   CMD-II/16:177   Implementation of Amendment No.3 February 2013 and Revised STI of IS 177:1989 Specification for Cotton Drills   29-5-2013    
223   CMD-I   CMD-I/MCR   Revision in MCR Performa   28-5-2013    
224   CMD-II   CMD-II/16:299   Implementation of revised Indian Standard Specification IS 299:2012 and Revised STI for Alumino-Ferric   28-5-2013    
225   CMD-II   CMD-II/16:15298 (Pt 3)   Implementation of revised Indian Standard Specification for Personal Protective Equipment (Part 3) Protective Footwear .   27-5-2013    
226   CMD-III   CMD3/16:1729   AMENDMENT NO.5 MAY 2013 TO IS 1729: 2002 CAST IRON/DUCTILE IRON DRAINAGE PIPES AND PIPE FITTINGS FOR OVER GROUND NON-PRESSURE PIPELINE SOCKET AND SPIGOT SERIES   27-5-2013    
227   CMD-II   CMD-II/16:15298 (Pt 2)   Implementation of revised Indian Standard Specification for Personal Protective Equipment (Part 2) Safety Footwear .   27-5-2013    
228   CMD-III   CMD-3/16:15111(Pt 1&2)   Implementation of Amendment No.9 to IS 15111(Pt.2): 2002 Self ballasted Lamps for General Lighting Services - Part 2 Performance Requirements   23-5-2013    
229   CMD-III   CMD-III/16:15778   Implementation of Amendment No 2, May 2013 to IS 15778:2007 Chlorinated Polyvinyl chloride (CPVC) pipes for Hot and Cold water distribution supplies.   22-5-2013    
230   CMD-II   CMD-II/16:14433   Implementation of Amendment No.4 and Revised STI for Infant Milk Substitute Specification as per IS 14433:2007   21-5-2013    
231   CMD-III   CMD-III/16:6003   Comments on Modified Scheme of Testing and Inspection Doc: ST1/6003/5 as per IS 6003:2010 for the product "Indented wire for Prestressed concrete" reg:-   17-5-2013    
232   CMD-III   CMD3/16:12933   Amendment No.3 to IS 12933 (Part 2):2003 SOLAR FLAT PLATE COLLECTOR - SPECIFICATION PART 2 COMPONENTS   17-5-2013    
233   CMD-III   CMD/16:269   Guidelines for Resumption of Marking (ROM) for Cement   17-5-2013    
234   CMD-III   CMD-III/16:8112   Draft Scheme of Testing and Inspection Draft Doc: STI/8112/3 as per IS 8112:2013 for the product "Ordinary Portland cement, 4YGrade" reg:-   17-5-2013    
235   CMD-III   CMD-III/I6:1237   Comments on Modified Scheme of Testing and Inspection Doc: STI/1237/5 as per IS 1237:2012 for the product "Cement concrete flooring tiles" reg:-   17-5-2013    
236   CMD-II   CMD-II/16:7402   Implementation of revised Indian Standard Specification IS 7402:2011 for Ceramic Water Purifier Filter Candles.   15-5-2013    
237   CMD-III   STI/3564/6   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF HYDRAULICALLY REGULATED DOOR CLOSERS ACCORDING TO IS 3564:1995 (Fourth Revision)   10-5-2013    
238   CMD-III   CMD-3/16:15500   Fixation of Marking Fee for Deepwell Handpumps, Components and Special Tools - Part 7, Rubber Components as per IS 15500 (Part 7) : 2004   9-5-2013    
239   CMD-III   CMD-3/16:15500   Fixation of Marking Fee for Deepwell Handpumps, Components and Special Tools - Part 6, Brass/Bronze Components as per IS 15500 (Part 6) : 2004   9-5-2013    
240   CMD-III   CMD-3/16:15500   Fixation of Marking Fee for Deepwell Handpumps, Components and Special Tools - Part 5, Cast Iron Components as per IS 15500(Part 5) : 2004   9-5-2013    
241   CMD-III   CMD-III/16:7834(Part3)   Fixation of Marking Fee for Injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 3 Specific requirements for 90 degree elbow as per IS 7834(Part 3).   9-5-2013    
242   CMD-Ill   CMD-Ill/16:1626(Part3)   Fixation of Marking Fee for Asbestos Cement Building Pipes and Pipe Fittings, Gutters and Gutter Fittings and Roofing Fittings -Part 3 : Roofing Fittings as per IS 1626(Part 3).   9-5-2013    
243   CMD-IlI   CMD-IlI164989   Fixation of Marking Fee for Foam Concentrate for Producing Mechanical Foam for Fire Fighting as per IS 4989   8-5-2013    
244   CMD-II   CMD-II/16:9138   Implementation of revised Indian Standard Specification IS 9138: 2009 and Amendment No. 1 March 2013 for Azotobactor Chroococcum Inoculants.   29-4-2013    
245   CMD-II   CMD-II/G-11/LS PS-19593   PQ-19593 Data on failure of PDW & PNMW Samples   23-4-2013    
246   CMD-III   CMD-3/16:335   Revision of Marking Fee for New Insulating Oils as per IS 335:1993   22-4-2013    
247   CMD-III   CMD-3/16:15787   Revision of Marking Fee for Switch-Socket Outlets (non-interlocking type) as per IS 15787:2008   22-4-2013    
248   CMD-III   CMD 3/16:8112   CIRCULAR   16-4-2013    
249   CMD-III   CMD III/16:7098(3)   Implementation of Amendment No.4 March 2013 to IS 7098(Pt.3}:1993 Cross linked Polyethylene Insulated Thermoplastic Sheathed Cables for working voltages from 66 kVup to and .including 220 kV   16-4-2013    
250   CMD-III   CMD-III/16:302-2-3   Implementation of Amendment No.1 to IS 302-2-3 : 2007 Safety of Household and similar Electrical Appliances, Part 2 Particular Requirements, Section 3 Electric Iron   16-4-2013    
251   CMD-III   CMD3/16:1239(Part 2)   Implementation of Amendment No.2   16-4-2013    
252   CMD-III   CMD-III/16:1786   Implementation date of STI & Grouping. guidelines of IS 1786:2008 for the product"High strength deformed steel bars and wires for concrete reinforcement" reg:-   16-4-2013    
253   CMD-II   CMD-II/16:12650   Amendment No.3 to IS 12650:2003   10-4-2013    
254   CMD-II   CMD-II/16:3899   Rate of Marking Fee for Certification of Zineb Water Dispersible Powders   8-4-2013    
255   CMD-II   CMD-II/16:7402   Implementation of IS 7402:2011 and Revised STI of IS 7402:2011 Specification for Ceramic water Purifier Filter Candles.   5-4-2013    
256   CMD-III   STI/15683/2   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF PORTABLE FIRE EXTINGUISHER- PERFORMANCE AND CONSTRUCTION AS PER IS 15683: 2006   5-4-2013    
257   CMD-III   CMD-III/16:15683   Implementation of Modified Scheme of Testing and Inspection Doc: STI/15683/2,May 2013 as per IS 15683:2006 for the product “Portable Fire Extinguisher-Performance and construction” reg:-   5-4-2013    
258   CMD-III   CMD-III/16:6452   Implementation of Scheme of Testing and Inspection for Certification of High Alumina Cement for structural use as per IS 6452:1989(Doc: STI/6452/1, April 2013).   4-4-2013    
259   CMD-II   CMD-II/16:14543(Legal)   Data on failure of PDW Samples   4-4-2013    
260   HMD   STI/2112/3   SCHEME FOR CERTIFICATION OF SILVER JEWELLERY / ARTEFACT FOR FINENESS MARKING AS PER IS 2112:2003 [INCLUDING AMENDMENTS AS IN FORCE]   28-3-2013    
261   HMD   STI/1417/5   SCHEME FOR CERTIFICATION OF GOLD JEWELLERY / ARTEFACTS FOR FINENESS MARKING AS PER IS 1417:1999 (INCLUDING AMENDMENTS IN FORCE)   28-3-2013    
262   CMD-III   CMD-3/16:11552   Guidelines for surveillance inspection for Liquid Nitrogen Vessel as per IS 11552:2008   19-3-2013    
263   CMD-III   CMD-3/16:15884   Fixation of Marking Fee for Alternating Current Direct Connected Static Prepayment Meters for Active Energy (Class 1 & 2) as per IS 15884:2010   18-3-2013    
264   CMD-I   CMD-I/22:1   Intimation regarding extension of term of agreement with existing OSAs till 30 June 2013   15-3-2013    
265   CMD-I   CMD-I/22:1   Revision of rates for the outsourcing of surveillance Inspections under product certification scheme, to be made effective from the date of award of fresh contract.   15-3-2013    
266   CMD-II   CMD-II/16:14433   Implementation of Amendment No. 3 and Revised STI for Infant Milk Substitutes Specification as per IS 14433:2007   14-3-2013    
267   CMD-II   CMD-II/16:5346   Rate of Marking Fee for Certification of Synthetic Food Colour – Preparation and Mixtures   14-3-2013    
268   CMD-II   CMD-II/16:1319   Rate of Marking Fee for Certification of Edible Tapioca Starch   14-3-2013    
269   CMD-III   CMD-III/16:6452   Fixation of Marking Fee for High Alumina Cement for Structural Use as per IS 6452   13-3-2013    
270   CMD-III   CMD-3/16:15905   Fixation of Marking Fee for Hubless Centrifugally Cast (Spun) Iron Pipes, Fittings and Accessories - Spigot Series, as per IS 15905   12-3-2013    
271   CMD-III   CMD-3/16:3196(Part 1)   Circular   12-3-2013    
272   CMD-II   CMD-II/16:1825   Implementation of Amendment No. 3 and Revised STI for Aluminium Alloy Milk Cans Specification as per IS 1825:1983   12-3-2013    
273   CMD-II   CMD-II/16: 14543   REVISED MANUAL FOR PACKAGED WATER Doc No.: SM/IS14543 & IS13428/03 of March 2013   12-3-2013    
274   CMD-II   CMD-II/16:7180   Rate of Marking fee for Certification of Disposable Artificial Insemination Gloves   11-3-2013    
275   CMD-I   CMD-I/3:1   Delegation of Powers for Product Certification Activities   8-3-2013    
276   CMD-III   CMD-3/16:7454   Implementation of Amendment No. 5 to IS 7454 : 1991 Rehabilitation Equipment- Wheelchairs, folding, adult size - Specification   4-3-2013    
277   CMD-II   CMD-II/16: 14543 & 13428   DATA ON FAILURES IN PESTICIDE RESIDUES - PDW & PNMW   4-3-2013    
278   CMD-III   STI/648/6   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF COLD ROLLED NON-ORIENTED ELECTRICAL STEEL SHEET AND STRIP-FULLY PROCESSED TYPE ACCORDING TO IS 648:2006   25-2-2013    
279   CMD - III   CMD - III/16:14333   Grouping Guidelines for Grant of Licence / Inclusion of New varieties for High density polyethylene pipes for sewerage as per IS 14333:1996.   22-2-2013    
280   CMD-III   CMD-3/16:648   Implementation of Amendment No.5, November 2012 to IS 648:2006 and revised STI Doc: STI/ 648/6, January 2013.   22-2-2013    
281   CMD-II   CMD-II(Parliament questions)   Data on failure samples on food items   20-2-2013    
282   CMD-III   STI/1786/R-1/10   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF HIGH STRENGTH DEFORMED STEEL BARS AND WIRES FOR CONCRETE REINFORCEMENT ACCORDING TO IS 1786:2008 (Fourth Revision)   20-2-2013    
283   CMD-III   STI/1786/PP/6   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF HIGH STRENGTH DEFORMED STEEL BARS AND WIRES FOR CONCRETE REINFORCEMENT ACCORDING TO IS 1786:2008 (Fourth Revision)   20-2-2013    
284   CMD-III   CMD-III/16: 1786   Implementation of Modified Scheme of Testing and Inspection Doc:STI/1786/PP/6 January 2013 and Doc: STI/1786/R-l/10 January 2013 as per IS 1786:2008 for the product "High strength deformed steel bars and wires for concrete reinforcement"reg:-   20-2-2013    
285   CMD-III   CMD-III/16:1786   Grouping guidelines for High strength deformed steel bars and wires for concrete reinforcement as per IS 1786: 2008 for grant of license and inclusions.   20-2-2013    
286   CMD-III   CMD - III/16:12818   Grouping- Guidelines for Unplasticized Polyvinyl chloride (PVC-U) screen and casing pipes for Bore/Tube wells as per IS 12818:2010 for Grant of Licence / Inclusion of New varieties.   19-2-2013    
287   CMD-III   CMD-3/16:7285(Part 1 & 2)   Colour Identification on cylinders manufactured as per IS 7285 (Part 1& 2)   19-2-2013    
288   CMD-III   CMD-3/16:11552   SCHEME OF TESTING & INSPECTION FOR CERTIFICTAION OF LIQUID NITROGEN VESSELS OF CAPACITY UPTO 75 LITRES (According to IS 11552:2008)(First Revision)   19-2-2013    
289   CMD-II   CMD-II/16:1165   CMD-II/16:1165, 1656, 11536, 12299,13334(P-1), 13334(P- 2), 15757   1-2-2013    
290   CMD-III   CMD-3/16:15905   Grouping guidelines for Hubless Centrifugally Cast (Spun) Iron Pipes, Fittings and Accessories - Spigot Series, as per IS 15905 for considering grant of licence and inclusions.   30-1-2013    
291   CMD-III   CMD-3/16:9295   Implementation of Amendment No.4,December 2012 to IS 9295 : 1983   28-1-2013    
292   CMD-II   CMD-II/16:299   Information of revised version of Alumino-Ferric as per IS 299.   28-1-2013    
293   CMD-III   STI/15905/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF HUBLESS CENTRIFUGALLY CAST (SPUN) IRON PIPES, FITTINGS AND ACCESSORIES - SPIGOT SERIES ACCORDING TO IS 15905:2011   28-1-2013    
294   CMD-III   CMD-III/16:15778   Grouping guidelines for Chlorinated Polyvinyl chloride (CPVC) pipes for Potable Hot and Cold water distribution supplies as per IS 15778:2007 for grant of license and inclusions.   21-1-2013    
295   CMD-III   CMD-3/16:15905   Implementation of STI as per IS 15905:2011   11-1-2013    
296   CMD-III   STI/5986/4   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF HOT ROLLED STEEL FLAT PRODUCTS FOR STRUCTURAL FORMING AND FLANGING PURPOSES ACCORDING TO IS 5986:2011   8-1-2013    
297   CMD-III   CMD-III/16:15328   Guidelines for grouping of sizes for Unplastisized non-pressure polyvinyl chloride (PVC-U) pipes for use in underground drainage and sewerage systems as per IS 15328:2003   7-1-2013    
298   CMD-III   CMD-3/16:418   Implementation of Amendment No. 4 to IS 418 : 2004 Tungsten Filament Lamps for Domestic and Similar General Lighting Purposes (Fourth revision) Keeping in Abeyance of   7-1-2013    
299   CMD-III   CMD-3/16:2830   Gazette Notifications regarding Implementation of Steel & Steel Products(Quality Control) Oreder, 2012   4-1-2013    
300   CMD-II   CMD-II/16:14433   Implementation of Amendment No. 3 December 2012 and Revised STI of IS 14433:2007 Specification for Infant Milk Substitutes   4-1-2013    
301   CMD-III   CMD-3/16:8086(7)   Implementation of Amendment No.4 to IS 8086 : 1991 Rehabilitation Equipment - Wheelchair, Folding, Junior Size(Specification)   4-1-2013    
302   CMD-II   CMD-II/16:14625   Amendment No.5 December 2011 to IS 14625:1999 Plastic Feeding Bottles has been issued and implemented w.e.f. 31 December 2011.   3-1-2013    
303   CMD-II   CMD-II/16:12299   Implementation of Amendment No. 1 and Revised STI for Dairy Whitener Specification as per IS 12299:1998.   3-1-2013    
304   CMD-II   CMD-II/16:15757   Implementation of Amendment No. 3 and Revised STI for Follow-up-Formula – Complementary Foods Specification as per IS 15757:2007   2-1-2013    
305   CMD-II   CMD-II/16:13334 (Pt 1)   Implementation of Amendment No. 1 and Revised STI for Skimmed Milk Powder, Standard Grade Specification as per IS 13334 (Pt 1):1998.   2-1-2013    
306   CMD-II   CMD-II/16:11536   Implementation of Amendment No. 1 and Revised STI Processed – Cereal Based Complementary Foods Specification as per IS 11536:2007.   2-1-2013    
307   CMD-II   CMD-II/16:1656   Implementation of Amendment No. 2 and Revised STI Milk-Cereal based Complementary foods Specification as per IS 1656:2007   2-1-2013    
308   CMD-II   CMD-II/16:13334 (Pt 2)   Implementation of Amendment No. 3 and Revised STI for Skim Milk Powder, Extra Grade Specification as per IS 13334 (Pt 2):1992.   2-1-2013    
309   CMD-II   CMD-II/16:1165   Implementation of Amendment No. 1 and Revised STI for Milk Powder Specification as per IS 1165:2002.   2-1-2013    
310   CMD-III   CMD-3/16:4985   Implementation of Amendment No 4, March 2012 to IS 4985:2000   28-12-2012    
311   CMD-II   STI/1166/6 July 2008   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF CONDENSED MILK, PARTLY SKIMMED AND SKIMMED CONDENSED MILK ACCORDING TO IS 1166:1986 (Incorporating Amendment No. 1 , 2 & 3)   20-12-2012    
312   CMD-III   CMD-3/16:649   Implementation of-Amendment No 3, November 2012 to IS 649:1997   20-12-2012    
313   CMD-II   CMD-II/G-5   Farewell to Sh. O.N. Srivastava, Scientist F & Head, CMD-II   19-12-2012    
314   CMD-III   STI/13095/1,January 1993   SCHEME OF TESTING AND INSPECTION FOR THE CERTIFICATION OF BUTTERFLY VALVES FOR GENERAL PURPOSES ACCORDING TO IS:13095:1991   11-12-2012    
315   CMD-III   CMD-3/16:11513   SCHEME OF TESTING ANDINSPECTION FOR CERTIFICATION OF HOT ROLLED CARBON SEEL STRIP FOR COLD ROLLING PURPOSES ACCORDING TO IS 11513:2011   7-12-2012    
316   CMD-III   CMD-III/16:10124 (Part 1 to 13)   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF FABRICATED PVC-U FITTINGS FOR POTABLE WATER SUPPLIES ACCORDING TO IS 10124 (Part 1 to Part 13):2009   6-12-2012    
317   CMD-II   CMD-II/16:2046   Information of revised finalized version of Decorative Thermosetting Synthetic Resin Bonded Laminated Sheets as per IS 2046.   6-12-2012    
318   CMD-II   CMD/16:7180   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF DISPOSABLE ARTIFICIAL INSEMINATION GLOVES According to IS 7180:1973   4-12-2012    
319   CMD-III   CMD-3/16:8329   Implementation of Amendment No 2, November 2012 to IS 8329:2000   3-12-2012    
320   CMD-III   CMD-3/16:3024   Implementation of Amendment No 3, November 2012 to IS 3024:2006   3-12-2012    
321   CMD-III   CMD-3/16:2830   Implementation of Amendment No 1, November 2012 to IS 2830:2012   3-12-2012    
322   CMD-III   CMD/16:2041(196)   Fixation of Marking fee for Certification of IS 2041:1995   3-12-2012    
323   CMD-III   CMD-III/16:3087   Implementation of Modified STI Doc: STI/3087/5, Dec 2012 w.e.f. 31 12 2012 in view of Amendment No.2, Nov 2011 to IS 3087 : 2005   3-12-2012    
324   CMD-III   STI/5517/R-1/3   Scheme of testing and inspection for certification of steels for hardening and tempering according to IS :5517-1993   27-11-2012    
325   CMD - II   CMD-II/16:14151 (Part 2)   Reg. IS 14151(Part 2)   23-11-2012    
326   CMD-II   CMD   Data on failure samples on food items   22-11-2012    
327   CMD-III   CMD-3/16:10748   Implementation of Amendment No 1,November 2012 to 10748:IS 2004   21-11-2012    
328   CMD-III   CMD-3/16:2062   Implementation of Amendment No 1,November 2012 to IS 2062:2011   21-11-2012    
329   CMD-III   CMD-3/16:2002   Implementation of Amendment No 1,November 2012 to IS 2002:2009   21-11-2012    
330   CMD-III   CMD-3/16:1079   Implementation of Amendment No 1,November 2012 to IS 1079:2009   21-11-2012    
331   CMD-II   CMD-II/16:15041   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF TEXTILES – FLAT WOVEN WEBBING SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL SERVICES ACCORDING TO IS 15041:2001   8-11-2012    
332   CMD-I   CMD I/31:2   Amendment No.19 to Operating Manual for Product Certification, 2004   25-10-2012    
333   CMD-III   CMD-3/16:15911   Implementation of STI as per IS 15911:2010   25-10-2012    
334   CMD-III   CMD-III/16:1786   Comments on Modified Scheme of Testing and Inspection Doc: STI/1786/PP/6 October 2012 and Doc: STI/1786/R-1/10 October 2012 as per IS 1786:2008 for the product " High strength deformed steel bars and wires for concrete reinforcement"   22-10-2012    
335   CMD-III   CMD-3/16: 3854   CIRCULAR   19-10-2012    
336   CMD-III   CMD-III/16:1786   Grouping of sizes and strength grades for grant of licences and inclusions as per IS 1786: 2008 High strength deformed steel bars and wires for concrete reinforcement   18-10-2012    
337   CMD-II   CMD-II/16:16072   Circular   11-10-2012    
338   CMD-II   CMD-II/16:1825   Implementation of Amendment No.3 June 2012 and Revised STI of IS 1825:1983 Specification for Aluminium Alloy Milk Cans (Second Revision)   11-10-2012    
339   CMD-III   CMD-3/IS 302-2-30   Guidelines for Implementation of Amendment No.1 to IS 302-2-30 : 2007   9-10-2012    
340   CMD-III   CMD-3/16:9523   Implementation of Amendment No 3, September 2012 to IS 9523:2000   8-10-2012    
341   CMD-III   CMD-3/16:3601   Implementation of Amendment No 1, September 2012 to IS 3601:2006   8-10-2012    
342   CMD-III   CMD-3/16:1239(Part 2)   Implementation of Amendment No 1, September 2012 to IS 1239(Part 2):2011   8-10-2012    
343   CMD-III   CMD-3/16: 1161   Implementation of Amendment No 5, September 2012 to IS 1161:1998   8-10-2012    
344   CMD-III   STI/15636/4   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF AUTOMOTIVE VEHICLES – PNEUMATIC TYRES FOR COMMERCIAL VECHICLES – DIAGONAL AND RADIAL PLY ACCORDING TO IS 15636:2012   3-10-2012    
345   CMD-III   CMD-3/16:15636   Implementation of IS 15636:2012 "Automotive Vehicles-Pneumatic Tyres for Commercial Vehicles-Diagonal and Radial Ply" and STI (Doc: STI/15636/4, September2012)   3-10-2012    
346   CMD-III   CMD-III/16:15328   Comments on draft guidelines for Grouping of sizes for Unplastisized non-pressure polyvinyl chloride (PVC-U) pipes for use in underground drainage and sewerage systems as per IS 15328:2003   3-10-2012    
347   CMD-III   CMD-III/16:15683   Comments on Modified Scheme of Testing and Inspection as per IS 15683:2006 for the product "Portable Fire extinguisher- Performance & Construction" reg:-   3-10-2012    
348   CMD-III   CMD-3/16:694   Implementation of IS 694:2010 'Polyvinyl Chloride Insulated Unsheathed and Sheathed Cables/Cords with Rigid and Flexible Conductor for Rated Voltages up to and including 450/750 V (Fourth Revision) along with Amendment No. 1 September 2012'   1-10-2012    
349   CMD-I   CMD-1/20:2   Concession in Minimum Marking Fee for second or subsequent licences.   26-9-2012    
350   CMD-III   CMD-3/16:15636   Revision in Rate of Marking Fee for Certification of Automotive Vehicles -Pneumatic Tyres for Commercial Vehicles- Diagonal and Radial Ply.   26-9-2012    
351   CMD-III   CMD-3/16:15633   Revision in Rate of Marking Fee for Certification of Automotive Vehicles-Pneumatic Tyres for Passenger Car Vehicles-Diagonal and Radial Ply.   26-9-2012    
352   CMD-III   CMD-3/16:15627   Revision in Rate of Marking Fee for Certification of Automotive Vehicles-Pneumatic tyres for two and three-wheeled motor vehicles.   26-9-2012    
353   CMD-I   CMD-1/20:2   Concession in Minimum Marking Fee for second or subsequent Licenses[WITHDRAWN]   21-9-2012    
354   CMD-III   STI/5290/3   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF LANDING VALVES ACCORDING TO IS 5290:1993 (Including amendment No.1 to IS:5290-1993)   17-9-2012    
355   CMD-II   CMD-II/16:14483(Pt-1)   Rate of Marking fee for Certification of Fertilizer and Chemical Injector System – Part 1 Venturi Injector   14-9-2012    
356   CMD-III   CMD-3/16:2878   Implementation of Amendment No 8, June 2012 to IS 2878:2004   7-9-2012    
357   CMD-III   CMD-3/16:903   Implementation of Amendment No 3, June 2012 to IS 903:1993   7-9-2012    
358   CMD-III   STI/ 15100/4   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF MULTIFUNCTION VALVE ASSEMBLy FOR PERMANENTLY FIXED LIQUEFIED PETROLEUM GAS (LPG) CONTKINERS FOR AUTOMOTIVE USE FOR ACCORDINGTO IS 15100:2001 (Incorporating Amendment No.1 to 3)   6-9-2012    
359   CMD-III   CMD-Ill/16:15100(34)   Implementation Of Amendment No.3 May 2007 to IS 151OO:2001 Multi Function Valve Assembly for Permanently Fixed Liquefied Petroleum Gas (LPG)Containers for Autonrotive Use and revised STI Doc:STI/15!00/4 November, 2007.   6-9-2012    
360   CMD-III   CMD-3/16:5206   Rate of Marking Fee for Certification of Covered Electrodes for Manual Arc Welding of Stainless Steel and other similar High Alloy Steel   5-9-2012    
361   CMD-III   CMD-3/16:15911   Rate of Marking fee for Certification of Structural Steel (Ordinary Quality)   4-9-2012    
362   CMD-III   CMD-3 /16:14439 (Part 2)   Rate of Marking fee for Certification of Legal Metrology - Gas Volume Meters Diaphragm Gas Meters   4-9-2012    
363   CMD-II   CMD-II/16:15240   Rate of Marking fee for Certification of Profenfos EC   31-8-2012    
364   CMD-II   CMD-II/16:15041   Rate of Marking fee for Certification of Textiles-Flat woven webbing slings made of man-made fibres for general services   31-8-2012    
365   CMD-II   CMD-II/16:2802   Rate of Marking fee for Certification of Ice-Cream   30-8-2012    
366   CMD-II   CMD-II/16:14443   Rate of Marking fee for Certification of Poly Carbonate Sheets   30-8-2012    
367   CMD-III   STI/9968(Part 1)/2   Scheme of testing and inspection for certification of castomer Insulated cables for working voltages upto and including 1100 volts according to IS 9968(Part 1)-1988   27-8-2012    
368   CMD-III   STI/13098/2   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF AUTOMOTIVE VEHICLES-TUBES FOR PNEUMATIC TYRES ACCORDING TO IS 13098:2012   24-8-2012    
369   CMD-III   CMD/3/16:13098   Implementation of revised IS 13098:2012'Automotive Vehicles-Tubes for Pneumatic Tyres' and STI (Doc: STI/l3098/2, September2012)   21-8-2012    
370   CMD-III   STI/3513/Part 3/1   SCHMEME OF TESTING AND INSPECTION FOR CERTIFICATION OF RESIN TREATED COMPRESSED WOOD LAMINATES (COMPREGS)(PART-3 FOR GENERAL PURPOSES)ACCORDING TO IS 3513(PART 3):1989(First Revision)   21-8-2012    
371   CMD-II   CMD-II/16:14543(CGWA)   NOC from CGWA   17-8-2012    
372   CMD-II   Parliament Qn   Parliament question on Data on food products under certification   17-8-2012    
373   CMD-III   CMD-III/16:1879   Implementation of Amendment No 2, August 2012 to IS 1879:2010 "Malleable Cast Iron Pipe Fittings"   17-8-2012    
374   CMD-III   STI/2830/4   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF CARBON STEEL CAST BILLET INGOTS, BILLETS, BLOOMS AND SLABS FOR RE-ROLLING INTO STEEL FOR GENERAL STRUCTURAL PURPOSES ACCORDING TO IS 2830:2012   16-8-2012    
375   CMD-III   STI/2831/7   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF CARBON STEEL CAST BILLET INGOTS, BILLETS, BLOOMS AND SLABS FOR RE-ROLLING INTO STRUCTURAL STEEL (ORDINARY QUALITY) ACCORDING TO IS 2831:2012   16-8-2012    
376   CMD-III   STI/1171/2   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF FERROMANGANESE ACCORDING TO IS 1171: 2011   16-8-2012    
377   CMD-III   CMD-3/16:1171   Implementation of IS 1171:2011 "Ferromanganese" and STI (Doc:STI/1171/2,September 2012)   16-8-2012    
378   CMD-II   CMD-II/G-11 (LS PS5843)   Lok Sabha Provisional Starred Question Dy. No.5843 regarding norms for bottled water   16-8-2012    
379   CMD-II   CMD-II/G-11 (LS PS-5743)   Lok Sabha Provisional Starred Question Dy. No.5743 regarding BIS guidelines for food items   16-8-2012    
380   CMD-III   CMD-III/16:15683   Revision of Marking fee for Portable Fire Extinguisher- Performance and Constraction as per IS 15683   16-8-2012    
381   CMD-III   CMD-3/16:2831   Implementation of IS 2831:2012 "Carbon Steel Cast Billet Ingots, Billets,Blooms and Slabsfor Re-rollinginto Structural Steel (Ordinary Quality)" and STI(Doc:STI/2831/7,September2012)   14-8-2012    
382   CMD-III   CMD-3/16:2830   Implementation of IS 2830:2012 "Carbon Steel Cast Billet Ingots, Billets, Blooms and Slabs for Re-rolling into Steel For General Structural Purposes" and STI(Doc: STI/ 2830/4, September 2012)   14-8-2012    
383   CMD-III   CMD-III/16:15111   Guideline for SOM/ROM in case of failure of sample(s) in long duration test for CFLs as per IS 15111(Part 1 & 2)   13-8-2012    
384   CMD-II   CMD-II/16:14443   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF POLYCARBONATE SHEETS ACCORDING TO IS 14443:1997   7-8-2012    
385   CMD-III   CMD-III/16:15683   Revision of Marking Fee for Portable Fire Extinguisher - Performance and Construction as per IS 15683   7-8-2012    
386   CMD-III   CMD-III/16:14756   Fixation of Markating Fee for Stainless Steel Cooking Utensils as per IS 14756   2-8-2012    
387   CMD-I   CMD-I/16:5(BTH)   Payment of arrears to BTH Pvt Ltd,Lab Rai,(Haryana)   1-8-2012    
388   CMD-III   CMD-3/16:3196 (Part 1)   Implementation of Amendment No.5 to IS 3196 (Part 1):2006 and revised IS 3196 (Part 3):2012   31-7-2012    
389   CMD-II   CMD-II/16:7593   Power operated pneumatic sprayer cum duster – Knapsack type and the issue of endorsement of tank capacity in the licence document.   27-7-2012    
390   CMD-II   CMD-II/16:1166   Specification for Condensed milk; partly skimmed & skimmed condensed milk   25-7-2012    
391   CMD-II   CMD-II/16:1848   Implementation of revised Indian Standard Specification for Writing and Printing Paper.   24-7-2012    
392   CMD-III   STI-7092(Pt.II)/2-1987   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ALUMINIUM ALLOY TUBE FOR TRGATION PURPUSES EXTRUDED TUBE ACCORDING TO IS7092(Pt.II)-1987   18-7-2012    
393   CMD-III   CMD/16:7173   Scheme of testing and inspection for is 7173:1989   16-7-2012    
394   CMD-III   CMD-III/16: 6760   Scheme of Testing and Inspection for IS 6760:1972 Slotted Countersunk Head Word Screws   16-7-2012    
395   CMD-III   CMD-III/16:6760   Grouping of sizes for grant of licence/inclusion of new variety in the licence for slotted countersunk head wood screws as per IS 6760:1972   16-7-2012    
396   CMD-III   CMD-III/16:13095   Grouping of sizes for grant of licence/inclusion of additional sizes/types for butterfly valves for general purposes as per IS 13095:1991   4-7-2012    
397   CMD-III   CMD-III/16:14846/856   Implementation of Amendment No.4 to IS 14846: 2000 Specification For Sluice Valve for Water Works Purposes (50 to 1200 mm Size)   4-7-2012    
398   CMD-III   CMD-III/16:778/855   Implementation of Amendment No.4 to IS 778 : 1984 Specification for Copper Alloy Gate, Globe and Check Valves for Water Works Purposes (Fourth Revision)   4-7-2012    
399   CMD-III   CMD-III/16:2830   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF CARBON STEEL CAST BILLET INGOTS (PENCIL INGOTS),BILLETS, BLOOMS AND SLABS MANUFACTURED THROUGH ELECTRIC ARC FURNACE FOR RE-ROLLING INTO STEEL FOR GENERAL STRUCTURAL PURPOSES ACORDING TO IS: 2830-2012.   3-7-2012    
400   CMD-III   CMD-III/16:1171/849   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF FERRO - MANGANESE ACCORDING TO IS 1171: 2011   3-7-2012    
401   CMD-III   CMD III/16:302-2-30/851   Implementation of Amendment No.1 to IS 302-2-30 : 2007 Safety of Household and similar Electrical Appliances, Part 2 Particular Requirements, Section 30 Room Heaters   2-7-2012    
402   CMD-III   CMD-3/16:418/850   Implementation of Amendment No.4 to IS 418: 2004 Tungsten Filament Lamps for Domestic and Similar General Lighting Purposes ( fourth revision)   2-7-2012    
403   CMD-III   CMD 3/16:2418/853   Implementation of Amendment No, 8 to IS 2418 (part 1): 1977 Tubular Fluorescent Lamps for General Lighting Service, Part 1 Requirements and Tests   2-7-2012    
404   CMD-III   CMD III/16: 13340   Grouping Guidelines for Grant of Licence/Inclusion for Power Capacitors of Self-Healing Type for AC Power Systems having Rated Voltage Upto 1000V as per IS 13340: 1993   28-6-2012    
405   CMD-III   CMD-3/16:374   Supply of Electric Celling type Fans with Regulator as per IS 374:1979   28-6-2012    
406   CMD-III   CMD-III/16:2830   Comments on the revised Standard( IS 2830:2012) and draft STI   21-6-2012    
407   CMD-III   CMD-III/G-1   FAREWELL TO SHRI K.K.CHAUDHARY, SC-F & HEAD (CMD-III) ON RETIREMENT   18-6-2012    
408   CMD-III   CMD-3/16:15500 (Part 1 to 8)   Implementation of Amendment No 3, June 2012 to IS 15500 (Part 1 to 8):2004   15-6-2012    
409   CMD-III   STI/1554(Pt.2)/7   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF PVC INSULATED(HEAVY DUTY)ELECTRIC CABLES (FOR WORKING VOLTAGE FROM 3.3kV UPTO AND INCLUDING 11kV)ACCORDING TO IS:1554(Part 2)-1988(Second Revision)(Incorporating Amendment Nos.1 to 3)   12-6-2012    
410   CMD-III   CMD-3/16:9537(Pt.2)   Circular   12-6-2012    
411   CMD-II   CMD/16:15240   STI for IS 15240:2002   5-6-2012    
412   CMD-II   CMD-II/16:12786   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF POLYETHYLENE PIPES FOR IRRIGATION LATERALS ACCORDING TO IS 12786:1989 (Incorporating Amendment No.1 to 6)   4-6-2012    
413   CMD-II   CMD-II/16:14807   SCHEME OF TESTING AND INSPECTION FOR CERIFICATION OF PHOSPHATE SOLUBILIZING BACTERIAL INOCULANTS ACCORDING TO IS 14807:2000 (Including amendment No. 1 & 2)   1-6-2012    
414   CMD-II   CMD-II/16:8249   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ZINC SULPHATE, HEPTAHYDRATE, AGRICULTURAL GRADE ACCORDING TO IS: 8249-1994 (Including amendment No. 1 & 2)   1-6-2012    
415   CMD-II   CMD-II/16:14806   Draft SCHEME OF TESTING AND INSPECTION FOR CERIFICATION OF AZOSPIRILLUM INOCULANTS ACCORDING TO IS 14806:2000(Including amendment No. 1 & 2)   31-5-2012    
416   CMD-II   CMD-II/16:2344   Draft SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF FLAKE TYPE CHEWING TOBACCO(ZARDA) ACCORDING TO IS 2344:1994 (Incorporating Amendment No.1 & 2)   31-5-2012    
417   CMD-II   CMD-II/16:15298 (Pt 3)   Implementation of revised specification for IS 15298 (Pt 3):2011/ISO 20346:2004 Safety, Protective and Occupational Footwear for Professional use Part 3 Specification for Protective Footwear.   31-5-2012    
418   CMD-II   CMD-II/16:15298 (Pt 2)   Implementation of revised specification for IS 15298 (Pt 2):2011/ISO 20345:2004 Safety Protective and Occupational Footwear for Professional use Part 2 Specification for Safety Footwear.   31-5-2012    
419   CMD-III   CMD-III/16:15683   Withdrawal of Indian Standards due to implementation of IS 15683 : 2006   24-5-2012    
420   CMD-III   CMD-III/16:783   Amendment No.3,April 2012 to IS 783:1985 Code of Practice for Laying of Concrete Pipes(First Revision)   24-5-2012    
421   CMD-III   CMD3/16:1554(Pt.2)/838   Implementation of Amendment No.4 April 2012 to IS 1554(Pt.2):1988 Specification for PVC Insulated (Heavy Duty)Electric Cables   23-5-2012    
422   CMD-III   CMD III/16:7098(1)/837   Implementation of Amendment No.5 April 2012 to IS 7098(Pt.1):1988 Cross linked Polyethylene Insulated Thermoplastic Sheathed Cables for Working Voltages up to and Including 1100 Volts   23-5-2012    
423   CMD-III   CMD-III/16: 8737   Release of test certificates for LPG valves as per IS 8737 in the name of LPG Cylinder Manufacturer   18-5-2012    
424   CMD-III   CMD/16:15500(Pt-3)(150)   Fixation of Marking Fee for Certification of IS 15500(Pt-3):2004 The rate of marking fee for Certification of Deepwell Handpumps Components Part-3- Handpump Sub assemblies. as per IS 15500(Pt-3):2004 has been fixed as under   16-5-2012    
425   CMD-III   CMD-III/16:13098   Dual marking on tubes for pneumatic tyres as per IS 13098:1991   11-5-2012    
426   CMD-III   CMD-III/16:1237   Revised Indian Standard IS 1237:2012 Specification for Cement Concrete Flooring Tiles (Second Revision).   11-5-2012    
427   CMD-III   CMD-III/16:8034/14220/9079/9283   Sampling Plan for Pump Sets / Motors as per IS 8034, IS 14220, IS 9079, IS 9283   10-5-2012    
428   CMD-III   STI/9537(Part II)/1   Scheme of Testing and Inspection for Certification of Rigid Steel Conduits for Electrical Wiring According To IS:9537(Part II)-1981   8-5-2012    
429   CMD-III   CMD-3/16:9206   Implementation of Amendment No. 3 to IS 9206:1979 Dimensions of Caps for Tungsten Filament General Service Electric Lamps   8-5-2012    
430   CMD-III   CMD-3/16:1879/785   Implementation of Amendment No.1, November 2011 to IS 1879 : 2010 Malleable Cast Iron Pipe Fittings -Specification   8-5-2012    
431   CMD-I   CMD-I/1:11   Application form for GOL in Bi-Lingual form   1-5-2012    
432   CMD-III   CMD-3/16:9471(7)   Implementation of Amendment No.1 to IS 9471(part 7): 2000 Modular Lower Limb Orthotic Components, Part 7 Orthotic Joint Bars, Ankle and Knee (Upper and Lower)   30-4-2012    
433   CMD-III   CMD-3/16:11646(2)   Implementation of Amendment No.2 to IS 11646 (Pt 2): 1986 Cane for Visually Handicapped'   30-4-2012    
434   CMD-III   CMD-3/16:11708   Implementation of Amendment No.4 to IS 11708: 1986 Hand, Mechanical   30-4-2012    
435   CMD-II   CMD II/16:14543 (CGWA)   NOC from CGWA/SGWA for PDW applicants   25-4-2012    
436   CMD-III   CMD-3/16:418/831   Implementation of Amendment No.3 to IS 418:2004 Tungsten Filament Lamps for Domestic and similar General Lighting Purposes(fourth revision)   24-4-2012    
437   CMD-II   CMD-II/16:14543 (Manual)   Meeting for Review of Packaged Drinking Water Manual and procedure for Stoppage of Marking & Resumption of Marking   24-4-2012    
438   CMD-III   CMD-III/16:1592/824   Implementation of Amendment No.2, April 2012 to IS 1592:2003 Asbestos Cement Pressure Pipes and Joints - Specification   24-4-2012    
439   CMD-III   CMD-III/16:13592/825   Implementation of Amendment No.6,March 2012 to IS 13592:1992   24-4-2012    
440   CMD-III   CMD-III/16:12235(Part 17)/827   Amendment No.1, April 2012 to IS 12235 (Part 17 : 2004 Thermoplastics Pipes and Fittings-Method of Test Part 17 Determination of Ash Content and Sulphated Ash Content (First Revision)   18-4-2012    
441   CMD-III   CMD-III/16:12235/828   Amendment No.1,April 2012 to IS 12235 (Part 3) : 2004 Thermoplastics Pipes and Fittings-Method of Test Part 3 Test for Opacity(First Revision)   18-4-2012    
442   CMD-III   CMD-III/16:15778/819   Proposed Grouping Guidelines for Grant of Licence and Inclusion of new Varieties for Chlorinated Polyvinyl Chloride (CPVC) Pipes for Hot and Cold Water Distribution Supplies as per IS 15778:2007   17-4-2012    
443   CMD-III   CMD-III/16:13592/825   Implementation of Amendment No.6, March 2012 to IS 13592:1992   16-4-2012    
444   CMD-III   CMD-III/16:1592/824   Implementation of Amendment No.2, April 2012 to IS 1592:2003 Asbestos Cement Pressure Pipes and Joints - Specification   16-4-2012    
445   CMD-III   CMD-III/16:15111(Part 1 & 2)/823   Implementation of Amendment No. 8 to IS 15111(Pt.2):2002 Self ballasted Lamps for General Lighting Services - Performance Requirements   16-4-2012    
446   CMD-II   CMD-II/16:13488   Marking fees data for IS 13488   13-4-2012    
447   CMD-III   CMD-III/16:12894/820   Implementation of Amendment No.1, July 2011 to IS 12894:2002 Pulverized Fuel Ash-lime Bricks-Specification(First Revision)   11-4-2012    
448   CMD-III   CMD-III/16:2547(Part 1)/822   Implementation of Amendment No.3,July 2011 to IS 2547(Part 1):1976 Specification for Gypsum Building Plaster-Part 1 Excluding Premixed Lightweight Plasters(First Revision)   11-4-2012    
449   CMD-III   CMD-III/16:15683   Draft Grouping Guidelines for Grant of Licence/Inclusion of New Varieties as per IS 15683 : 2006   10-4-2012    
450   CMD-II   CMD-II/16:14543 (Tint)   Reg. Tinted containers for PDW & NMW   9-4-2012    
451   CMD-III   CMO-III/16:7887   Grouping Guidelines for Certification of Mild Steel Wire Rod for General Engineering Purposes as per IS 7887 : 1992   2-4-2012    
452   CMD-III   CMD-III/16:2202 (Part 1)/817   Implementation of Amendment No.3, March 2012 to IS 2202 (Part 1): 1999 Wooden Flush Door Shutters (Solid Core Type),Part 1 Plywood Face Panels(Sixth Revision)   30-3-2012    
453   CMD-III   CMD-III/16:7887/810   Grouping Guidelines for Certification of Mild Steel Wire Rod for General Engineering Purposes as per IS 7887 : 1992   29-3-2012    
454   CMD-II   CMD-II/16:7903   Implementation of revised Indian Standard Specification for Textiles Tarpaulins made from High Density Polyethylene Woven Fabric Specification   28-3-2012    
455   STI   STI/7903/3   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF TARPAULINS MADE FROM HIGH DENSITY POLYETHYLENE WOVEN FABRIC ACCORDING TO IS 7903:2011 (FOR INTEGRATED PROCESSES ONLY)   27-3-2012    
456   CMD-II   CMD-II/16:14543 & 13428   Information on number of samples of PDW as per IS 14543 and NMW as per IS 13428   27-3-2012    
457   CMD-II   CMD-II/16:5470   Implementation of Amendment No.1 to IS 5470:2002 Dicalcium Phosphate Animal Feed Grade and the revised STI Doc: STI/5470/3 March 2012   23-3-2012    
458   CMD-III   CMD-3/16: IS 14439 (Part 2)   Implementation of Amendment No 2, July 2009 to IS 14439 (Part 2):1998   1-3-2012    
459   STI   STI/14756/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF STAINLESS STEEL COOKING UTENSILS ACCORDING TO IS 14756: 2000   27-2-2012    
460   CMD-III   CMD-3/16:14756   Implementation of Scheme of Testing and Inspection for Certification of Stainless Steel Cooking Utensils as per IS 14756:2000.   27-2-2012    
461   STI   STI/15636/3   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF AUTOMOTIVE VEHICLES – PNEUMATIC TYRES FOR COMMERCIAL VEHICLES – DIAGONAL AND RADIAL PLY ACCORDING TO IS 15636:2005   27-2-2012    
462   CMD-III   CMD-III/16: 15636   Scheme of Testing and Inspection as per IS 15636:2005 "Automotive Vehicles-Pneumatic Tyres for Commercial Vehicles- Diagonal and Radial Ply"   27-2-2012    
463   STI   STI/15633/3   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF AUTOMOTIVE VEHICLES – PNEUMATIC TYRES FOR PASSENGER CAR VEHICLES – DIAGONAL AND RADIAL PLY ACCORDING TO IS 15633:2005   27-2-2012    
464   CMD-II   CMD-II/ECO Mark   Data for ECO Mark licensees   27-2-2012    
465   STI   STI/2062/10   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF HOT ROLLEDMEDIUM AND HIGH TENSILE STRUCTURAL STEEL ACCORDING TO IS 2062:2011 (Seventh Revision)   22-2-2012    
466   CMD-III   CMD-III/16:2062   Circular   22-2-2012    
467   STI   STI/1239(PART 2)/6   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF STEEL TUBES, TUBULARS AND OTHER STEEL FITTINGS PART 2 - STEEL PIPE FITTINGS ACCORDING TO IS 1239 {Part 2):2011 (Fifth Revision)   22-2-2012    
468   CMD-III   CMD-Ill/16:1239 (Part 2)   Circular   22-2-2012    
469   STI   STI/459/7   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF CORRUGATED AND SEMI-CORRUGATED ASBESTOS CEMENT SHEETS ACCORDING TO IS 459:1992   22-2-2012    
470   CMD-III   CMD-III/16:459   Circular   22-2-2012    
471   CMD-III   CMD-3/16:15633/797   Scheme of Testing and Inspection as per IS 15633:2005 "Automotive Vehicles-Pneumatic Tyres for Passenger Car Vehicles-Diagonal and Radial Ply"   16-2-2012    
472   CMD-III   CMD-3/16:6149/796   Implementation of Amendment No 2,January 2012 to IS 6149:1984   16-2-2012    
473   CMD-III   CMD-3/16:13094/794   Amendment No. 2, November 2011 to IS : 1991 Diaphragm Type (Plastic Body) Float Operated Valves for Cold Water Services-Specification   13-2-2012    
474   CMD-II   CMD-II/16:14151(II):2008   Grouping Guidelines for grant of licenses and inclusion of new varieties of Fittings for the product Sprinkler Pipe, Quick Coupled Pipe and Fittings as per IS 14151(part II):2008.   12-1-2012    
475   CMD-II   STI/15909/1   PVC Geo-Membranes for Lining   10-1-2012    
476   CMD-III   CMD-III/16:4835   Fixation of Marking Fee for Polyvinyl Acetate Dispersion based Adhesives for Wood as per IS 4835 : 1979   9-1-2012    
477   CMD-I   CMD-1/20:1:7   Personal Hearing for disposing the cases of Cancellation/Non-Renewal   6-1-2012    
478   CMD-III   CMD-III/16:15683   Guidelines for Implementation of Amendment No.1, December 2008 to IS 15683:2006   3-1-2012    
479   CMD-III   CMD-III/16:15658/784   Implementation of Amendment No.2, Nov.2011 to IS 15658 : 2006 Precast Concrete Blocks for Paving - Specification   28-12-2011    
480   CMD-III   CMD-III/16:4020(Parts 1,2,3,4,7,8 & 12)/786   Implementation of Amendments   28-12-2011    
481   CMD-III   CMD-III/16:9972/787   Implementation of Scheme of Testing and Inspection for Certification of Automatic Sprinkler Heads for Fire Protection Service as per IS 9972:2002[DOC: STI/9972/1,Dec.2011]   28-12-2011    
482   CMD-III   CMD-III/16:848/783   Implementation of Amendment No.2, November 2011 to IS 848:2006 Synthetic Resin Adhesives for Plywood (Phenolic and Aminoplastic)-Specification(Second Revision)   28-12-2011    
483   CMD-III   CMD-III/16:3087/782   Implementation of Amendment No.2, Nov. 2011 to IS 3087 : 2005 Particle Boards of Wood and Other Lignocellulosic Materials(Medium Density) for General Purpose-Specification(Second Revision)   28-12-2011    
484   CMD-III   CMD-III/16:1592/781   Implementation of Amendment No.2,Dec 2011 to IS 1592:2003 Asbestos Cement Pressure Pipes and Joints-Specification(Fourth Revision)   28-12-2011    
485   CMD-III   CMD-III/16:14616/779   Implementation of Amendment No.4,Nov.2011 to IS 14616:1999 Laminated Veneer Lumber-Specification   26-12-2011    
486   CMD-III   CMD-III/16:5509/778   Implementation of Amendment No.3, Nov.2011 to IS 5509 : 2000 Fire Retardant Plywood- Specification(Second Revision)   26-12-2011    
487   CMD-III   CMD-III/16:1659/780   Implementation of Amendment No.2, Now.2011 to IS 1659:2004 Block Boards-Specification(Fourth Revision)   26-12-2011    
488   CMD-II   CMD/16:2480(Pt 1)   Rate of Marking Fee for Certification of General Purpose Glass Thermometers Part 1- Solid Stem Thermometer   26-12-2011    
489   CMD-III   CMD-III/16:1269(Part 2)   Fixation of Marking Fee for Legal Metrology - Material Measures of Length, Part 2 - Steel Tape Measures as per IS 1269(Part 2) : 1997   20-12-2011    
490   CMD-III   CMD-III/16:9972/774   Fixation of Marking Fee for Automatic Sprinkler Heads as per IS 9972:2002   16-12-2011    
491   CMD-III   CMD-III/16:15683/771   Implementation of Amendment No.1, December 2008 to IS 15683:2006   16-12-2011    
492   CMD-III   CMD-3/16:1269(Part 1)   Fixation of Marking Fee for Legal Metrology - Material Measures of Length, Part 1 - Woven Metallic Glass Fibre Tape Measures as per IS 1269{Part 1) : 1997   16-12-2011    
493   CMD-II   CMD-II/16:5346   Implementation of Amendment No.4 to IS 5346   9-12-2011    
494   CMD-III   CMD-III/16:2062/769   Implementation of Revised Standard IS 2062 : 2011 Hot Rolled Medium and High Tensile Structural Steel   8-12-2011    
495   STI   STI/3224/11   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF VALVE FITTINGS FOR COMPRESSED GAS CYLINDERS EXCLUDING LIQUEFIED PETROLEUM GAS (LPG) CYLINDERS ACCORDING TO IS 3224:2002   8-12-2011    
496   CMD-III   CMD-3/16:3224   Implementation of modified STI as per IS 3224: 2002   7-12-2011    
497   CMD-III   CMD-III/16:11513   Implementation of Revised Standard IS 11513 : 2011 Hot Rolled Carbon Steel Strip for Cold Rolling Purposes - Specification   5-12-2011    
498   CMD-III   STI/1269 (Part 2)/ 1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF LEGAL METROLOGY-MATERIAL MEASURES OF LENGTH PART 2- STEEL TAPE MEASURES ACCORDING TO IS 1269 (Part 2): 1997   2-12-2011    
499   CMD-III   STI/4835/1   STI FOR CERTIFICATION OF POLYVINYLACETATEDISPERSION BASED ADHESIVES ACCORDING TO IS 4835:1979   2-12-2011    
500   CMD-III   CMD-3/16:1269 (Part 2)   STI as perIS 1269 (Part 2): 1997   2-12-2011    
501   CMD-III   CMD-3/16:7285 (Part 2)   Implementation of Amendment No 3, November 2011 to IS 7285 (Part 2) : 2004   2-12-2011    
502   CMD-III   CMD-III/16:4835   Implementation of Scheme of Testing and Inspection for Certification of Polyvinyl Acetate Dispersion Based Adhesives According to IS 483q : 1979   2-12-2011    
503   CMD-III   CMD-3/16:3196 (Part 1)   Implementation of Amendment No 5, November 2011 to IS 3196 (Part 1):2006   2-12-2011    
504   CMD-III   CMD-3/16:1269(Part 1)   Implementation of STI as per IS 1269 (Part 1): 1997   2-12-2011    
505   CMD-III   STI/1269 (Part 1)/ 1   STI FOR CERTIFICATION OF LEGAL METROLOGY-MATERIAL MEASURES OF LENGTH PART-1-WOOVEN AND GLASS FIBRE TAPE MEASURES ACCORDING TO IS 1269 (Part 1): 1997   1-12-2011    
506   CMD-III   CMD-III/16: Cement   Guidelines for procurement of Clinker from Clinker units located in India for Cement manufacturing   30-11-2011    
507   CMD-II   CMD-II/MPW   Testing of PDW for inclusion of Additional Sizes/packing material   29-11-2011    
508   CMD-III   C:MD-III/16:366/759   Implementation of Amendment No.6 to IS 366: 1991 Electric Irons - Specification   29-11-2011    
509   CMD-II   STI/7903/IP/2   STI FOR CERTIFICATION OF TARPAULINS MADE FROM HIGH DENSITY POLYETHYLENE WOVEN FABRIC ACCORDING TO IS 7903:2011 (FOR INTEGRATED PROCESSES ONLY)   24-11-2011    
510   CMD-II   CMD-II/16:7903   Implementation of revised specification for IS 7903:2011 Textiles –Tarpaulins Made from high density polyethylene woven fabric   24-11-2011    
511   CMD-I   CMD-I/20:1:1   Minutes of DDGR'S meeting held on 29 & 30 August 2011   18-11-2011    
512   CMD-I   CMD-I/31   Amendment No. 17 to Operating Manual for Product Certification, 2004   16-11-2011    
513   CMD-I   CMD-I/31   Amendment No. 18 to Operating Manual for Product Certification, 2004   14-11-2011    
514   CMD-II   CMD-II/16:6047   Amendment No.1 to IS 6047:2009 Scouring Powder for utensils cleaning, has been issued wherein the requirement for “Matter insoluble in alcohol” has been changed from 80 (Max) to 80 (Min)   3-11-2011    
515   CMD-III   CMD-III/16:1293   Implementation of Amendment No.5 to IS 1293: 2005 Plugs and Socket-Outlets of Rated Voltage up to and including 250 Volts and Rated Current up to and including 16 Amperes -Specification   1-11-2011    
516   CMD-III   CMD-III/16:15636/33/27/756   Uniformity in Licence Document/Endorsement for Pneumatic Tyres for Automotives Vehicles.   21-10-2011    
517   CMD-III   CMD-III/16:4985   Grouping of Sizes of UPVC Pipes for Potable Water Supplies as per IS 4985 for Grant of License / Inclusion of Additional Varieties   18-10-2011    
518   CMD-III   STI/7079/5   STI FOR CERTIFICATION OF AUTOMOTIVE VEHICLES – BREAK HOSE ASSEMBLIES FOR HYDRAULIC BREAKING SYSTEMS USED WITH NON-PETROLEUM BASE BRAKE FLUID ACCORDING TO IS 7079:2008   18-10-2011    
519   CMD-III   CMD-III/16:5986/753   Implementation of Revised Standard IS 5986 : 2011 Hot Rolled Steel Flat Products for Structural Forming and Flanging Purposes - Specification   17-10-2011    
520   CMD-III   CMD-III/I6:7079   Implementation of Amendment No.1, September 2011 to IS 7079:2008, Specification for "Automotive Vehicles - Brake Hose Assembly for Hydraulic Braking Systems Used with Non -Petroleum Based Brake Fluid   14-10-2011    
521   CMD-II   STI/9359/4   STI FOR CERTIFICATION OF PHORATE G ENCAPSULATED ACCORDING TO IS 9359:1995 (Including Amendment No. 1)   12-10-2011    
522   CMD-II   CMD-II/16:9359   Implementation of Amendment No. 1 to Phorate G Encapsulated– Specification as per IS 9359:1995.   11-10-2011    
523   CMD-III   CMD-III/16:648   Implementation of Amendment No.4, October 2011 to IS 648:2006   11-10-2011    
524   CMD-III   CMD III/16:14930(2)/747   Implementation of Amendment No.2 to IS 14930 (Part 2):2001 Conduit Systems for Electrical and Communication Installation: Part 2 Particular Requirements for Conduit System Buried Underground   7-10-2011    
525   CMD-III   CMD III/16:14930(1)/746   Implementation of Amendment No.3 to IS 14930 (Part 1):2001-Conduit Systems for Electrical and Communication Installation   7-10-2011    
526   CMD-III   CMD III/16:9283/745   Implementation of Amendment No 4 to IS 9283: 1995:Motors for Submersible Pumpsets - Specification   7-10-2011    
527   CMD-III   CMD III/16:1258/751   Implementation of revised IS 1258:2005 – Bayonet Lampholders   5-10-2011    
528   CMD-III   CMD III/16:3854/750   Implementation of Amendment No.6 to IS 3854:1997 for Switches for domestic and similar purposes- Specification   5-10-2011    
529   CMD   STI/623/4   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF LADIES BICYCLE FRAME ACCORDING TO IS 623:2008 (Third Revision)   28-9-2011    
530   CMD-III   CMD-III/16:623   Implementation of IS 623: 2008-Bicvcle4'nimes~- Specification(Amal2amatin2 IS 3404: 1979)   28-9-2011    
531   CMD - III   CMD - III/16:15683   Implementation of Amendment No.1, December 2008 to IS 15683:2006.   26-9-2011    
532   CMD-III   CMD-III/16:7347   Implementation of Amendment No.3, September 2011 to IS 7347:1974   26-9-2011    
533   CMD-III   CMD-III/16: IS 302-1   Acceptance of Test Reports as per IS 302-1:1979   23-9-2011    
534   CMD-III   CMD-III/16:12818/741   Implementation of revised standard IS 12818:2010, for Unplasticized PVC screen and casing pipes for bore / tube well and revised STI Doc: STI/12818/3, August 2011   21-9-2011    
535   CMD-III   CMD-III/16:9815   Scheme of Testing and Inspection for Certification of Servo Moter Operated Automatic Line Voltage Correctors, Part1: Correctors for Single Phase Applications according to IS 9815(Part 1):1994[Doc: STI/9815/2, August 1995]   21-9-2011    
536   CMD-III   CMD-III/16/:15683/740   Implementation of IS 15683:2006 Portable Fire Extinguisher-Performance and Construction-Specification   1-9-2011    
537   CMD-III   CMD-III/16:9281/739   Description of the product in the licence as per IS 9281 (Part 3): 1981 - Electronic Weihing Systems   30-8-2011    
538   CMD-II   Amend-3,4 13428   Amendment No-3,4 June 2010 IS 13428 : 2005 Natural Mineral water - Specification   29-8-2011    
539   CMD-II   Amend-5,6,7 to IS 14543   Amendment No. 5,6,7 December 2008 to IS 14543 : 2004 Packaged Natural Mineral water   29-8-2011    
540   CMD-III   CMD III/16:9281   Description of the product in the licence as per IS 9281 (Part 3): 1981 - Electronic Weighing Systems   26-8-2011    
541   CMD-II   CMD-II/16:14543   Implementation of Amendment No.5, 6 & 7 for Packaged Drinking Water (other than Packaged Natural Mineral Water) – Specification as per IS 14543:2004   24-8-2011    
542   CMD-II   CMD-II/16:13428   Implementation of Amendment No.3 & 4 for Packaged Natural Mineral Water – Specification as per IS 13428:2005   24-8-2011    
543   CMD-II   STI/14543/7   STI FOR CERTIFICATION OF PACKAGED DRINKING WATER(OTHER THAN PACKAGED NATURAL MINERAL WATER) ACCORDING TO IS 14543:2004(Incorporating Amendment No. 1 to 7)   24-8-2011    
544   CMD-II   STI/13428/5   STI FOR CERTIFICATION OF PACKAGED NATURAL MINERAL WATER ACCORDING TO IS 13428:2005 (First Revision)-(Incorporating Amendment No. 1 to 4)   24-8-2011    
545   CMD-III   STI/8329/FU/ 2   STI FOR CERTIFICATION OF CENTRIFUGALLY CAST (SPUN) DUCTILE IRON PRESSURE PIPES FOR WATER, GAS AND SEWAGE ACCORDING TO IS 8329: 2000 (FOR FLANGING UNITS)   19-8-2011    
546   CMD-III   CMD-III/16:3196 (Pt.1)   Approval of drawings for LPGCylinders   19-8-2011    
547   CMD-III   CMD-Ill/16: 8329/737   Revision of Scheme of Testing and Inspection for Certification of Centrifugally Cast (spun) Ductile Iron Pressure Pipes for Water, Gas and Sewage according to IS 8329: 2000 (for Flanging Units)   19-8-2011    
548   CMD-III   CMD-III/16:12818/735   Implementation of revised standard IS 12818:2010, for Unplasticized PVC screen and casing pipes for bore / tube well and revised STI Doc: STI/12818/3, August 2011.   19-8-2011    
549   CMD-III   CMD-III/16: 14494   Implementation of IS 14494:1998 Elastomer Insulated Flexible Cables for use in Mines - Specification   9-8-2011    
550   CMD-III   STI/14494/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF Elastomer Insulated Flexible Cable For use in Mines According to IS 14494:1998   9-8-2011    
551   CMD-II   CMD-II/16:5982   Implementation of Amendment No. 2 to IS 5982:2003   9-8-2011    
552   CMD-III   CMD-III/16:12818   Implementation of revised standard IS 12818:2010, for Unplasticized PVC screen and casing pipes for bore / tube well and revised STI Doc: STI/12818/3, August 2011.   8-8-2011    
553   CMD-II   CMD-II/G-25   Implementation of Packaged Drinking Water Manual (Second Issue) and procedure for SOM/ROM   8-8-2011    
554   CMD-III   CMD-III/16:3994   Fixation of Marking Fee for Bowls, Wash as per IS 3994 : 1993   8-8-2011    
555   STI   STI/3183/4   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF PETROLIUM AND NATURAL GAS INDUSTRIES-STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS ACCORDING TO IS/ISO 3183:2007   1-8-2011    
556   CMD-III   CMD-III/6:3183   Implementation of IS/ISO 3183:2007 "Petrolieum and Natural Gas Industries-Steel Pipe for Pipe Line Transportation Systems"and STI (Doc: STI/3183/ 4, November 2011)   1-8-2011    
557   CMD-III   CMD-III/16:1161/732   Implementation of Amendment No.4, June 2011 to IS 1161:1998   29-7-2011    
558   CMD-III   CMD-III/16:1660/730   Implementation of revised IS 1660:2009,"Wrought Aluminium Utensils" and revised STI (Doc:STI/1660/6, September 2011)   29-7-2011    
559   CMD-III   CMD-III/16:Cement/731   Guidelines of certification of various types of Cement   28-7-2011    
560   CMD-llI   CMD-III/16: Cement / 731   Guidelines for certification of various types of Cement   27-7-2011    
561   CMD-II   SM/IS14543 & IS 13428/02   MANUAL FOR PACKAGED WATER   27-7-2011    
562   CMD-llI   STI/ 1660/ 6   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF WROUGHT ALUMINIUM UTENSILS ACCORDING TO IS 1660: 2009   27-7-2011    
563   CMD-II   CMD-II/G-25   Implementation of Manual for Packaged water (Second Issue) And revised procedure of Stop Marking & Resumption of Marking For food product under Mandatory Certification   27-7-2011    
564   CMD-III   CMD-III/16:1660   Implementation of revised IS 1660:2009, "Wrought Aluminium Utensils" and revised STI (Doc: STI/1660/ 6, September 2011)   26-7-2011    
565   CMD-II   CMD-II/16:7224   Implementation of Amendment No. 2 to IS 7224:2006   22-7-2011    
566   CMD-II   STI / 299/4   STI FOR CERTIFICATION OF ALUMINO-FERRIC ACCORDING TO IS 299:1989   13-7-2011    
567   CMD-III   CMD-III/16:9815/727   Grouping Guidelines for Grant of Lenience/Inclusion for Servo-Motor Operated Automatic Line Voltage Correctors: Part 1 - Correctors for Single-Phase Application as per IS 9815 (Part 1) : 1994   13-7-2011    
568   CMD-II   STI /428/4   STI OF CERTIFICATION OF WASHABLE DISTEMPER ACCORDING TO IS 428:2000   12-7-2011    
569   CMD-II   STI / 341/4   STI FOR CERTIFICATION OF BLOCK JAPAN TYPE B TO INDIAN STANDARD COLOURS ACCORDING TO IS:341-1973   12-7-2011    
570   CMD-II   STI / 307/1   STI FOR CERTIFICATION OF CARBON DIOXIDE ACCORDING TO IS 30:1966   12-7-2011    
571   CMD-II   STI 285/5   STI FOR CERTIFICATION OF LAUNDRY SOAPS ACCORDING TO IS 285:1992   12-7-2011    
572   CMD-II   STI / 266 /3   STI FOR CERTIFICATION OF SULPHURIC ACID (ACCORDING TO IS 266:1993)   12-7-2011    
573   CMD-III   CMD-III/16:8034   Revised sampling plan for considering GOL /inclusion as per IS 8034/14220/9079/9283.   8-7-2011    
574   CMD-III   CMD - III/16:12709/725   Implementation of Amendments No.4 June 2011 to IS 12709 :1994   8-7-2011    
575   CMD-III   CMD-III/16:14402/724   Implementation of Amendment No.1 June 2011 to IS 14402:1996   8-7-2011    
576   CMD-II   STI /252/3   STI FOR CERTIFICATION OF CAUSTIC SODA, PURE AND TECHNICAL   6-7-2011    
577   CMD-II   STI/265/3   STI FOR CERTIFICATION OF HYDROCHLORIC ACID   6-7-2011    
578   CMD-II   STI/254/3   STI FOR CERTIFICATION OF MAGNESIUM CHLORIDE GRADE - 3   6-7-2011    
579   CMD-II   STI/220/5   STI for CERTIFICATION OF FERRO-GALLO TANNATE FOUNTAIN PEN INK   6-7-2011    
580   CMD-II   STI /251 / 3   STI for CERTIFICATION OF SODA ASH   6-7-2011    
581   CMD-II   STI / 158 / 3   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF READY MIXED PAINT, BRUSHING, BITUMINOUS, BLACK, LEAD-FREE, AOID, ALKALI and HEAT RESISTING ACCORDING TO IS:158-1981   6-7-2011    
582   CMD-II   STI / 133 /5   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ENAMEL, INTERIOR a)UNDERCOATING b)FINISHING According to IS:133-2004 (Fourth-Revision)   6-7-2011    
583   CMD-II   STI -44 / 2   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF IRON OXIDE PIGMENTS FOR PAINT ACCORDING TO IS:44-1991 (Second-Revision)   6-7-2011    
584   CMD-II   STI/15603/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ALPHACYPERMETHRIN WP According to IS 15603:2005   6-7-2011    
585   CMD-III   CMD - III/16:15683   Guidelines for implementation of Amendment No.1, December 2008 to IS 15683:2006.   5-7-2011    
586   CMD-III   STI/15601/BP/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF CYMOXANIL + MANCOZEB WETTABLE POWDER According to IS 15601:2005 (BATCH PROCESS)   4-7-2011    
587   CMD-III   CMD-III/16:15558   Mini Domestic Water Heater for use with LPG as per IS 15558:2005   4-7-2011    
588   CMD-III   CMD III/16: 60079-1-7-11   Postponement regarding implementation of revised IS/IEC 60079 series of Standards   4-7-2011    
589   CMD-III   CMD-III / 16:3024   Implementation of Amendment No.2, June 2011 to IS 3024 : 2006 Grain Oriented Electrical Steel Sheet and Strip (Second Revision)   30-6-2011    
590   CMD-III   CMD-III/16:1626   Scheme of Testing and Inspection for Certification of Pipe Fitting, Gutters & Gutter, Fitting and Roofing Fittings   28-6-2011    
591   CMD-Ill   CMD-Ill/16:2062   Implementation of Amendment No.2, June 2011 to IS 2062:2006   27-6-2011    
592   CMD-III   CMD-III/16:4923   Implementation of Amendment No.6, June 2011 to IS 4923:1997   27-6-2011    
593   CMD-II   CMD/16:15601   Rate of fee fro Certification of Cymoxanil + Mancozed WP   22-6-2011    
594   CMD-II   CMD/16:15603   Rate of Marking Fee for Certification of Alphacypermethrin WP   22-6-2011    
595   CMD-II   CMD-II/16:2791   Amendment no. 1 to STI/2791/4   17-6-2011    
596   CMD-II   CMD-II/16:3309   Amendment No 1 to STI/3309/6 August 2010   17-6-2011    
597   CMD-II   CMD-II/16:7224   Review of implementation of Revised STI   17-6-2011    
598   CMD-III   CMD-II/16:14433   IS 14433:2007 Specification for Infant Milk Substitute   16-6-2011    
599   CMD-III   CMD-III / 16:277   Implementation of Amendment No.4, June 2011 to IS 277:2003   14-6-2011    
600   CMD-III   CMD III/16:12463   Implementation of Amendment no.1 MAY 2011 to IS 12463:1988 - Inhibited Mineral Insulating Oils   10-6-2011    
601   CMD-III   STI / 12463 / 1 June 1999   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF INTIBITED MINERAL INSULATING OILS ACCORDING TO IS 12463 : 1988   7-6-2011    
602   CMD-III   CMD-III / 16:648 / 173   Implementation of Amendment No. 3, May 2011 to IS 648:2006   6-6-2011    
603   CMD-III   CMD-III/16:15683 / 709   All India First licence   6-6-2011    
604   CMD-III   CMD-III /16:6003 / 710   Implementation of Revised IS 6003 : 2010 Indented wire for pre-stressed concrete - Specification (Second Revision)   6-6-2011    
605   CMD-III   CMD-III /16 :15111 / 708   Publication of IS 15906 : 2010 - Measurement of Mercury Level in Fluorescent Lamps   2-6-2011    
606   CMD-II   CMD-II /16:15298 (Pt 2)   Implementation of Table – 3, Additional requirements for special applications with appropriate designation for marking for as per IS 15298 (Pt 2):2002.   2-6-2011    
607   CMD-III   Amendment No. 3 to 648   Amendment No-3 May 2011 to IS 648:2006 COLD RELLOD NON-ORIENTED ELECTICALSTEEL   31-5-2011    
608   CMD-III   CMD-III/16:648   Implementation of Amendment No. 3 May 2011 to IS 648:2006   31-5-2011    
609   CMD-III   STI/3502/7   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF STEEL CHEQUERED PLATES ACCORDING TO IS 3502:2009   24-5-2011    
610   CMD-III   CMD-III / 16 : 3502 / 706   Implementation of revised is 3502 : 2009 "Steel Chequered Plates"   23-5-2011    
611   CMD-III   CMD-III / 16 :15636   Tyre Policy   20-5-2011    
612   CMD - III   STI / 3055 (Pt.1) / 7   SCHEME OF TESTING ABD INSPECTION FOR CERTIFICATION OF CLINICAL THERMOMETERS PART-1 SOLID STEM TYPE ACCORDING TO IS 3055(Pt.1) :1944   20-5-2011    
613   CMD - III   CMD-III / 16:15627   Implementation of Amendment No. 1 May 2011 to IS 15627 : 2005   20-5-2011    
614   CMD-III   CMD-III-16-3934 / 70   Scheme of Testing and Inspection for Certification of WASH BOWLS according to IS 3934:1993   16-5-2011    
615   CMD-III   CMD-III / 16:15683 / 700   Fixation of Making Fee for Portable Fire Extinguishers as per IS 15683:2006   16-5-2011    
616   CMD-III   CMD-III/16:3989   Implementation of Amendment NO 1, April 2011 to IS 3989 : 2009   13-5-2011    
617   CMD-III   CMD-III/16:11552   Implementation of Amendment No. 2 April 2011 to IS 11552 : 2008   13-5-2011    
618   CMD   STI/3994/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF WASH BOWLS ACCORDING TO IS 3994:1993   12-5-2011    
619   CMD-III   CMD-III/16:15786   Fixation of Marking fee for Pre-laminated cement bonded particle Board as per IS 15786:2006   12-5-2011    
620   CMD-III   CMD-III/16:15683   Fixation of Marking fee for Portable fire Extinguishers as per IS 15683:2006   12-5-2011    
621   CMD-III   CMD-III/16:13849   Fixation of Marking fee for Portable fire Extinguishers- Dry Powder Type (Constant Pressure ) including ECO Mark requirment as per IS 13849:1993   12-5-2011    
622   CMD-III   CMD-III/16:14394   Fixation of Marking fee for Industrial Fasteners-Hexagonal Nuts of Product Grade C - Hot Dip Galvanised (Size Range M12 to M36) as per IS 14394:1996   11-5-2011    
623   CMD-III   CMD-III/16:1171   Fixation of Marking fee for Ferro Manganese as per IS 1171:1996   11-5-2011    
624   CMD-III   CMD-III/16:15622   Grouping guidelines for Grant of Licence / Inclusion of New Varieties for Pressed Ceramic Tiles as per IS 15622:2006   11-5-2011    
625   CMD-III   CMD-III/16:15633   Implementation of Amendment No. 2, April 2011 to IS 15633:2005   11-5-2011    
626   CMD-III   CMD-III/16:15100   Implementation of Amendment No. 5, April 2011 to IS 15100:2001   9-5-2011    
627   CMD-III   CMD-III/16:5484   Implementation of Amendment No. 1, April 2011 to IS 5484:1997   9-5-2011    
628   CMD-II   CMD-II/16:14543   Proposal from DDGS, SRO on the action to be taken with regrad to the failure of samples of containers to be used for packing PWD   5-5-2011    
629   CMD-III   CMD III/16:14930   Imaplementation of Amendment No.2 APRIL 2011 to IS 14930 (Pt.1):2001-Conduit Systems for Electrical and Communication Installation; General Requirements.   4-5-2011    
630   CMD-III   CMD III/16:14927   Implementation of Amendment No.1 APRIL 2011 to IS 14927 (Pt.1): 2001 – Cable Trunking and Ducting Systems for Electrical Installations; General Requirements.   4-5-2011    
631   CMD-III   STI/14394/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF INDUSTRIAL FASTENERS- HEXAGON NUTS OF PRODUCT GRADE C-HOT-DIP GALANIZED (SIZE RANGE M 12 TO M 36) ACCORDING TO IS 14394: 1996   4-5-2011    
632   CMD-II   STI/6047/2   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SCOURINGPRODUCTS FOR UTENSIL CLEANING ACCORDING TO IS 6047:2009   3-5-2011    
633   CMD-III   CMD III/16:14394   Implementation of Scheme of Testing and Inspection for Cirtification of Hexagon Nuts of Product Garde C, Hot-Dip Galvanized as per IS 14394:1996 {Doc:STI/14394/1,May 2011}   3-5-2011    
634   CMD-III   CMD III/16:8737 & 9798   Spurious Test Cirtificates (TC) of Brass Rod & Components   3-5-2011    
635   CMD-III   CMD-III/16:3196   Circular   2-5-2011    
636   CMD-III   CMD-III/16:60079   Change over to revised IS/IEC 60079 series of specifications   2-5-2011    
637   CMD-II   CMD-II/16:15138   Implementation of revised Indian Standard Specification for Textiles-Jute Bags for Packing of 50 kg Sugar   2-5-2011    
638   CMD-III   CMD-III/16:CEMENT   Verification visit for ad-hoc permission from DIPP, Ministry of Commerce for manufacture of cement by applicants before grant of BIS licence   27-4-2011    
639   CMD-II   CMD-II/16:15138   Implementation of revised Indian Standard Specification for Textiles-Jute Bags for Packing of 50 kg Sugar   27-4-2011    
640   CMD-III   STI/13983/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF STAINLESS KITECHEN SINKS FOR DOMESTIC PURPOSE ACCORDING TO IS 13983:1994   13-4-2011    
641   CMD-III   STI/6908/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ASBESTOS CEMENT PIPES & FITTINGS FOR SEWERAGE AND DRAINAGE ACCORDING TO IS 6908:1991 ( First Revision )   8-4-2011    
642   CMD-III   CMD-III/16:6908   Implementation of Scheme of Testing and Inspection for Certification of Asbestos Cement Pipes & Fitting for Sewerage and Drainage according to IS 6908:1991 ( First Revision ) [ Doc:STI/6908/1, April 2011]   8-4-2011    
643   CMD-III   CMD-III/16:12894/677   All India First Licence   6-4-2011    
644   CMD-III   CMD-III/16:15636/675   Scheme of Testing and Inspection as per IS 15636:2005 "Automotive Vehicles- pneumatic Tyres for Commercial Vehicles- Diagonal and Radial ply"   6-4-2011    
645   CMD-III   CMD-III/16:15633/676   Scheme of Testing and Inspection as per IS 15633:2005 "Automotive Vehicles-pneumatic Tyres for Passeenger Car Vehicles- Diagonal and Radial Ply"   6-4-2011    
646   CMD-III   STI/15633/2   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF AUTOMOTIVE VEHICLES – PNEUMATIC TYRES FOR PASSENGER CAR VECHICLES – DIAGONAL AND RADIAL PLY ACCORDING TO IS 15633:2005 (Incorporating Amendment No.1)   6-4-2011    
647   CMD-III   STI/15636/2   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF AUTOMOTIVE VEHICLES – PNEUMATIC TYRES FOR COMMERCIAL VECHICLES – DIAGONAL AND RADIAL PLY ACCORDING TO IS 15636:2005 (Incorporating amendment nos. 1 & 2)   6-4-2011    
648   CMD-III   CMD-III/16:1897   Grouping Guidelines for copper strip for Electrical purposes,as per IS 1897,for drawl of Samples for considering Inclusions/ Grant of Licences.   31-3-2011    
649   CMD-II   STI/14937/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF TRIAZOPHOS EMULSIFIABLE CONCENTRATE According to IS 14937:2001   30-3-2011    
650   CMD-II   CMD/16:14937   STI for IS 14937:2001   30-3-2011    
651   CMD-II   STI/15236/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF PROFENOFOS+CYPERMETHRIN EC According to IS 15236:2002   29-3-2011    
652   CMD-II   CMD/16:15236   STI for IS 15236:2002   29-3-2011    
653   CMD-II   CMD-II/16:14151(part-2)   Circular   25-3-2011    
654   CMD-II   CMD/16:15182   STI for IS 15182:2002   25-3-2011    
655   CMD-III   CMD-III/G-14/IS4509/668   Fixation of Marking Fee for Certification of Ring Slugging Wrenches ( Spanners ) as per IS 4509:1992   22-3-2011    
656   CMD-III   CMD-III/G-14/IS4508/667   Fixation of Marking Fee for Certification of Open Ended Slugging Wrenches ( Spanners ) as per IS 4508:1992   22-3-2011    
657   CMD-III   CMD-III/16:12818/711   Draft of Doc:STI/12818/3   21-3-2011    
658   CMD-III   CMD-III/16:15476   Fixation of Marking fee for certification of IS 15476   21-3-2011    
659   CMD-III   CMD-III/16:6908   Fixation of Marking fee for certification of IS 6908:1991   21-3-2011    
660   CMD-II   CMD-II/16:878   Implementation of revised Indian Standard Specification for Laboratory Glassware - Graduated Measuring Cylinders.   21-3-2011    
661   CMD-II   STI/878/2   SCHEME OF TESTING AND INSPECTION FOR CERIFICATION OF LABORATORY GLASSWARE – GRADUATED MEASURING CYLINDERS ACCORDING TO IS 878:2008/ISO 4788:2005 (Second Revision)   21-3-2011    
662   CMD-III   CMD-III/16:4508/660   Implementation of Scheme of Testing and Inspection for Open Ended Slugging Wrenches ( Spanners ) according to IS:4508:1992   18-3-2011    
663   CMD-II   CMD/16:11188 ( part I )   STI for IS 11188 ( part I ) :1991   17-3-2011    
664   CMD-III   CMD-III/16:710   Implementation of revised Standard IS 710:2010, For Marine Plywood and revised STI Doc: STI/710/5,April 2011.   16-3-2011    
665   CMD-III   CMD-III/16:4509/661   Implementation of Scheme of Testing and Inspection for Ring Slugging Wrenches ( Spanners ) according to IS:4509:1992   16-3-2011    
666   CMD-II   CMD-II/16:15138   Implementation of revised IS 15138:2010   15-3-2011    
667   CMD-II   Draft-STI   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF TEXTILES JUTE BAGS FOR PACKING 50 KG SUGAR ACCORDING TO IS 15138:2010   14-3-2011    
668   CMD-III   STI/4509/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF RING SLUGGING WRENCHES (SPANNERS) ACCORDING TO IS: 4509:1992 (Including amendment No. 1 & 2)   14-3-2011    
669   CMD-III   STI/4508/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF OPEN ENDED SLUGGING WRENCHES (SPANNERS) ACCORDING TO IS: 4508:1992 (Including amendment No. 1 & 2)   14-3-2011    
670   CMD-III   CMD-III/16:694/645   Implementation of Amendement No.5 JAN 2011 issued to IS 694: 1990-Specification for PVC Insulated Cables for working voltages upto and including 1100 Volts.   11-3-2011    
671   CMD-III   CMD-III/16:4985   Circular   11-3-2011    
672   CMD-III   CMD-III/16:3601   Implementation of revised IS 3601: 2006 - Steel Tubes for Mechanical and General engineering purposes specification   11-3-2011    
673   CMD-III   STI/3601/3   Scheme of Testing and Inspection for Certification of Steel Tubes Mechanical and General Engg. Purposes According To IS 3601:2006   9-3-2011    
674   CMD-II   CMD-II/16:1051   Amendment no. 6 to IS 1051   3-3-2011    
675   CMD-III   CMD-III/16:7098(1)/657   Implementation of Amendment No.4 FEB 2011 to IS 7098 (Pt.1) :1988 Cross Linked Polyethylene Insulated Thermoplastic Sheathed Cables for working voltages up to and including 1100 volts.   1-3-2011    
676   CMD-III   Amend 1 to IS 996:2009   Amendment NO.1 January 2011 to IS 996 : 2009 Single phase. A.C. Induction Motors for General Purpose   28-2-2011    
677   CMD-III   STI/996/6 JUN 2011   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SINGLE PHASE a.c. INDUCTION MOTORS FOR GENERAL PURPOSE ACCORDING TO IS 996:2009 (Including Amendment No.1)   28-2-2011    
678   CMD-III   CMD III/16:996   Implementation of IS 996:2009 – Single Phase a.c. Induction Motors for General Purpose with Amend.No.1   28-2-2011    
679   CMD-III   11722/3   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF THIN WALLED FLEXIBLE QUICK COUPLING PIPES ACCORDING TO IS 11722:1986 (Including Amendment No. 1 to 5)   28-2-2011    
680   CMD-III   STI/7098(Pt 1)/5   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF CROSSLINKED POLYETHYLENE INSULATED THERMOPLASTIC SHEATHED CABLES FOR WORKING VOLTAGES UPTO AND INCLUDING 1100 VOLTS ACCORDING TO IS 7098(Part 1):1988 (Including Amendment Nos.1 to 4)   28-2-2011    
681   CMD-III   CMD-III/16:11722/652   Implementation of Amendment No.5, January 2011 to IS 11722: 1986, Specification for Thin Walled Flexible Quick Coupling Pipes   28-2-2011    
682   CMD-III   CMD-III/16:710/655   Implementation of revised IS 710 : 2010 Spcecification for Marine Plywood (Second Revision)   28-2-2011    
683   CMD-III   CMD-III/16:325/654   Implementation of Amendement NO.3 FEBRUARY 2011 issued to IS 325: 1996 - Specification for Three Phase Induction Motors.   28-2-2011    
684   CMD-III   CMD-III/16:7098(1)   Implementation of Amendment no.4 FEB 2011 to IS 7098(Pt.1):1988 Cross linked Polyethylene Insulated Thermoplastic Sheathed Cables for working voltages up to and including 1100 volts.   28-2-2011    
685   CMD-III   CMD-III/16:15622/651   Grouping guidelines for grant of licence / Inclusion of New Varieties for Pressed Ceramic Tiles as per IS 15622: 2006   25-2-2011    
686   CMD-III   CMD-III/16:694(10810)/650   Printing of Amendment No.1 February 2011 issued to IS 10810 (Part 59):1988- Methods of test for cables: Part 59 Determination of the Amount of halogen acid Gas Evolved Ved During Combustion of Polymeric Materials Taken from Cables   25-2-2011    
687   CMD-III   CMD-III/16:2185/648   Grouping Guidelines for Grant of Certification Marks Licence and Inclusion of New Varieties of Concrete Masonary Unit-Autoclaved Cellular (Aerated) Concrete Blocks as per IS 2185 (PART 3):1984   24-2-2011    
688   CMD-II   CMD-II/16:14433   IS 14433:2007 Specification for infant Milk Substitute   24-2-2011    
689   CMD-III   CMD-III/16:710   Implementation of Revised IS 710:210 Specification for marine Plywood (Second Revision)   24-2-2011    
690   CMDIII   CMD III/16: 325   Implementation of Amendment No.3 FEBRUARY 2011 issued to IS 325: 1996 - Specification for Three Phase Induction Motors.   23-2-2011    
691   CMD-III   CMD III/16: 694 (10810)   Printing of Amendment No.1 FEBRUARY 2011 issued to IS 10810 (PART 59): 1988 - METHODS OF TEST FOR CABLES; PART 59 DETERMINATlON OF THE AMOUNT OF HALOGEN ACID GAS EVOLVED DURING COMBUSTION OF POLYMERIC MATERIALS TAKEN FROM CABLES   23-2-2011    
692   CMD-III   CMD III/16: 60079-1/ 60079-7/ 60079-11   Postponement regarding implementation of revised IS/IEC 60079 series of Standards.   23-2-2011    
693   CMD-III   CMD III/16:694   Implementation of Amendment No.5 JAN 2011 issued to IS 694: 1990- Specification for PVC Insulated Cables for working voltages upto and including 1100 Volts.   22-2-2011    
694   CMD-III   CMD-III/16: 6901   Implementation of revised IS 6901:2009, "Gas Welding Equipment-Pressure Regulators for Gas Cylinders used in Welding, Cutting and Allied Processes, up to 300 bar (Third Revision) and revised STI (Doc: STI/ 6901/3, April 2011)   21-2-2011    
695   CMD-III   STI/ 6901/ 3   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF PRESSURE REGULATORS FOR GAS CYLINDERS USED IN WELDING, CUTTING AND ALLIED PROCESSES UPTO 300 BAR ACCORDING TO IS 6901: 2009 (ISO 2503:1998) (Including amendment No.1)   21-2-2011    
696   CMD-II   CMD-II/16:13428   Final copy of amend no. 4 t o IS 13428   17-2-2011    
697   CMD-III   CMD-III/16:6240(167)   Implementation of revised standard IS 6240:2008 for Hot Rolled steel plate (up to 6 mm), sheet and strip for the manufactur of low pressure Liquefiable Gas Cylinders and Revised STI Doc:STI/6240/90CT.2008   17-2-2011    
698   CMD-III   CMD-III/16:15476/643   Implementation of STI for certification of Bamboo Mat Corrugated Sheets according to IS 15476:2004 (incorporating Amenment no. 1 to 4)[Doc :STI/125476/1, Feb 2011]   11-2-2011    
699   CMD-II   CMD-II/16:1051   Amendment NO.6 to IS 1051   10-2-2011    
700   CMD-III   CMD-III/16:15778/641   Implementation of Amendment NO.1, January 2011 to IS 15778 : 2007 Chlorinated Polyvinyl Chloride (CPVC) Pipes for Hot and Cold Water Distribution Supplies   10-2-2011    
701   CMD-III   CMD-iii/16:4984/640   Implementation of Amendment NO.6, January 2011 to IS 4984 : 1995 High Density Polyethylene Pipes for Water Supply (Fourth Revision )   10-2-2011    
702   CMD-III   CMD-III/16:10096 (Part-2)/642   Circular   10-2-2011    
703   CMD-II   CMD/16:2480 (PTt 1)   STI For IS 2480 (Pt 1)   9-2-2011    
704   CMD-III   CMD-III/16:15265/637   All India First Licence   8-2-2011    
705   CMD-III   CMD-III/16:15622/636   All India First Licence   8-2-2011    
706   CMD-III   CMD-III/16:277   Grouping Guideline for Galvanized Steel Sheets ( Plain and Corrugated ) as per IS 277,for drawl of Samples for Considering inclusion / Grant of Licence   8-2-2011    
707   CMD-II   CMD-II/16:14543   Comments on Packaged Drinking Water   7-2-2011    
708   CMD-III   CMD-III/16:15801/366   Groupling Guidelines for Grant of Licence and Indusion of New Varicties for Polypropylene Random Copolymer Pipes for Hot and Cold Water Supplies as per IS 15801 : 2008   4-2-2011    
709   CMD-III   CMD-III/16:15801   STI for Certification of polypropylene random Copolymer pipes for Hot and Cold Water supplies according to IS 15801 : 2008 [ Doc:STI/15801/.1 March 2009 ]   4-2-2011    
710   CMD-II   CMD-II/16:14151(Pt-2)   Implementation of revised specification for IS 14151(Part-2):2008   4-2-2011    
711   CMD-II   CMDII/16:15786   Implementtation of scheme of Testing and Inspection for Certification of Prelaminated Cement Bonded Particle Boards accordin to IS 15786: 2008 [ DOC : STI /15786/1, February 20011]   4-2-2011    
712   CMD-II   STI/15786/1   STI for certification of prelaminated cement bonded particle boards according to IS: 15786 :2008   4-2-2011    
713   CMD-III   CMD III/ G-1   Non-implementation of the Amendments/Revised Standards   3-2-2011    
714   CMD-III   CMD/16:4615   Circular   28-1-2011    
715   CMD-III   CMD-III/16:10002/620   Implementation of amendment No. 2, November 2010 to IS 10002:1981, Specification for Certification of constant speed compression ignition (diesel) engine for general purposes (above 19 kw)   27-1-2011    
716   CMD-III   CMD-III/16:10001/622   Implementation of Amendment No. 6, November 2010 to IS 10001:1981, Specification for Performance Requirements for constant speed compression ignition (diesel) engine for general purposes (up to 19 kw)   27-1-2011    
717   CMD-III   CMD-III/16:14512/634   Implementation of Scheme of Testing and Inspection for Safe cum Safe Deposit Lockers as per IS 14512:1998   27-1-2011    
718   CMD-III   CMD-III/16:2486/624   Implementation of revised IS 2486(pt.1): 1993 - METAL FITTINGS OF INSULATORS FOR OVERHEAD POWER LINES WITH NOMINAL VOLTAGE GREATER THAN 1 000 V - GENERAL REQUIREMENTS AND TESTS and new STI.   27-1-2011    
719   CMD-III   CMD-III/16:1879/633   Implementation of revised IS 1879:2010 for Malleable Cast Iron pipe Fittings and Revised Doc:STI/1879/9, March 2011   27-1-2011    
720   CMD-II   CMD-II/16:15298(P-2)   Circular   25-1-2011    
721   CMD-II   CMD-II/16:6047   Implementation of revised Indian Standards Specification for Scouring Products for Utensil Cleaning   25-1-2011    
722   CMD-III   CMD-III/16:1879   Implementation of revised IS 1879:2010 for Malleable Cast Iron Pipe Fittings and Revised Doc:STI/1879/9, March 2011   24-1-2011    
723   CMD-III   STI/14512/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SAFE-CUM-SAFE DEPOSIT LOCKERS ACCORDING TO IS 14512: 1998   24-1-2011    
724   CMD-III   STI/1879/ 9, March 2011   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF MALLIABLE CAST IRON PIPE FITTINGS ACCORDING TO IS: 1879:2010 (Third Revision)   24-1-2011    
725   CMD-III   STI/6240/9   STI for Certification of Hot Rolled Steel Plate (up to 6 mm), Sheet and Strip for the manufacture of Low Pressure Liquifable Gas Cylinders. According to IS 6240:2008 (Fourth Revision)   24-1-2011    
726   CMD-III   CMD-III/16:6240 (167)   Implementation of revised standard IS 6240:2008 for Hot rolled Steel Plate (upto 6 mm), Sheet and strip for the manufacture of Low Pressure Liquefiable Gas Cylinders and Revised STI Doc : STI/6240/9 Oct 2008   24-1-2011    
727   CMD-III   STI/1171/1 January 2011   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF FERRO- MANGANESE ACCORDING TO IS 1171: 1996   21-1-2011    
728   CMD-III   STI/2486/4 February 2011   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF METAL FITTINGS OF INSULATORS FOR OVERHEAD POWER LINES WITH NOMINAL VOLTAGE GREATER THAN 1 000 V PART 1 GENERAL REQUIREMENTS AND TESTS ACCORDING TO IS 2486(PT.1):1993   21-1-2011    
729   CMD-III   CMD- III/16:7098(2)   Implementation of Amendment no.2 NOV 2007 to IS 7098(Pt.2):1985 -Crosslinked Polyethylene Insulated PVC Sheathed Cables for working voltages from 3.3kV upto and including 33kV.   18-1-2011    
730   CMD-II   CMD-II/16:15907   Implementation of revised scheme of testing and inspection Doc:STI/15907/2 January 2010 for Agro Textiles High Density Polyethylene (HDPD) Woven Beds for Vermiculture as per IS 15907:2010   18-1-2011    
731   CMD-III   STI/7098(Pt.2)/4   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF CROSSLINKED POLYETHYLENE INSULATED PVC SHEATHED CABLES FOR WORKING VOLTAGES FROM 3.3kV UPTO AND INCLUDING 33kV ACCORDING TO IS 7098(Part 2):1985 (Including Amendment Nos.1 & 2)   18-1-2011    
732   CMD-III   CMD-III/16:1171/630   Implementation of Scheme of Testing and Inspection for Certification of Ferro Manganese as per IS 1171:1996{DOC:STI/1171/1,January 2011} .   14-1-2011    
733   CMD-III   STI/11170/4   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF CONSTANT SPEED COMPRESSION IGNITION (DIESEL) ENGINES FOR AGRICULTURAL PURPOSES (UP TO 19 kW) ACCORDING TO IS: 11170-1985 (Incorporating Amendment no.1 to 5)   11-1-2011    
734   CMD-III   CMD-III/G:17   Information required by Ministry   11-1-2011    
735   CMD-II   CMD-II/16:5470   AMENDMENT NO. 1 to IS 5470:2002   31-12-2010    
736   CMD-III   CMD-III/16:335 &12463   Issue of Amendments to IS 12177:1987 & 12958:1990   30-12-2010    
737   CMD-III   CMD-III/16:2185(PART-3)   Proposed Grouping Guidelines for Grant of Licence and Inclusion of New varieties of Autoclaved Cellular (Aertated) Concrete Blocks as per IS 2185(pt.3) :1984 for Comments   29-12-2010    
738   CMD-III   CMD-III/16:11170   Implementation of Amendment November 2010 to IS 11170:1985, and revised STI/11170/4, Decenber 2010   29-12-2010    
739   CMD-III   STI/10002/2   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF CONSTANT SPEED COMPRESSION IGNITION (DIESEL) ENGINE FOR GENERAL PURPOSES (ABOVE 19 kW) ACCORDING TO IS: 10002-1981(Incorporating amendment No. 1& 2)   22-12-2010    
740   CMD-III   STI/10001/6   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF CONSTANT SPEED COMPRESSION IGNITION (DIESEL) ENGINES FOR GENERAL PURPOSES (UP TO 19 kW) ACCORDING TO IS: 10001-1981 (Including Amendment No.1 to 6)   22-12-2010    
741   CMD-II   CMD-II /16:14151(Pt-2)   Implementation of revised specification for IS 14151(Part-2):2008   22-12-2010    
742   CMD-III   CMD-III/7834   Revised STI as per IS :7834 (Pt 1 to 8)   22-12-2010    
743   CMD-III   CMD-III/16: 1470   Scheme of Testing and Inspection for Silicomanganese   22-12-2010    
744   CMD-III   CMD- III116: 111 70   Implementation of Amendment No. 5, November 2010 to IS 11170: 1985, and revised STI /11170/4, December 2010   22-12-2010    
745   CMD-III   CMD-III/16:10002   Implementation of Amendment No. 2, November 2010 to IS 10002:1981, Specification for Certification of constant speed compression ignition (diesel) Engine for general purposes (above 19 kW)   16-12-2010    
746   CMD-III   CMD-III/16:10001   Implementation of Amendment No. 6, November 2010 to IS 10001:1981, Specification for Performance Requirements for constant speed compression ignition (diesel) engine for general purposes (up to 19 kW)   16-12-2010    
747   CMD-III   CMD III/16: 2486   Implementation of revised IS 2486(Pt.1): 1993 - METAL FITTINGS OF INSULATORS FOR OVERHEAD POWER LINES WITH NOMINAL VOLTAGE GREATER THAN 1 000 V - GENERAL REQUIREMENTS AND TESTS and new STI.   16-12-2010    
748   CMD-III   STI/11170/Importer/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF CONSTANT SPEED COMPRESSION IGNITION (DIESEL) ENGINES FOR AGRICULTURAL PURPOSES (UP TO 19 kW) ACCORDING TO IS: 11170-1985 (Including Amendment no.1 to 5)   14-12-2010    
749   CMD-I   CMD-I/20:1:2   Amendment to Simplified procedure for Grant of licence – Review on Receipt of Test Report regarding   13-12-2010    
750   CMD-III   CMD-III/16:7098(Part 3)(53)   Processing of application for grant of licence for cross-linked polyethylene insulated thermoplastic sheathed cables: part 3 for working voltages from 66 kV up to and including 220 kV as per IS 7098 (part 3):1993   8-12-2010    
751   CMD-III   CMD-III/16:14255(617)   Implementation of Amendment No.1 Oct 2010 to IS 14255:1995-Aerial Bunched Cables.   1-12-2010    
752   CMD-III   CMD-III/16:Cement   Guidelines for procurement of Clinker from Clinker units located in India for Cement manufacturing   1-12-2010    
753   CMD-III   CMD-III/16:2061   Implementation of revised STI for certification of Bicycle Front Forks as per IS 2061:1995, Doc : STl/2061/2/Jan 2000   1-12-2010    
754   CMD-III   CMD-III/16:2061   Implementation of Amendment No.1, Nov 2010 to IS 2061 : 1995 Specification for Bicycle – Front Forks (First Revisio   1-12-2010    
755   CMD-III   CMD III/16:14255   Implementation of Amendment No.1 OCT 2010 to IS 14255: 1995 – Aerial Bunched Cables.   29-11-2010    
756   CMD-III   CMD-III/G-5   Cancellation of Farewell party to Shri S.K. Bhatia, Sc-F & Head (CMD-III) Scheduled on 30-11-2010   29-11-2010    
757   CMD-III   CMD-III/G-14(612)   Fixation of Marking Fee for Certification of Safe cum Safe Deposit Lockers as per IS 14512 : 1998   24-11-2010    
758   CMD-III   CMD-III/G-14(610)   Fixation of Marking Fee for Certification of Fire Resisting (Insulating) Filing Cabinates as per IS 14561 : 2007   24-11-2010    
759   CMD-III   CMD-III/G-14(611)   Fixation of Marking Fee for Certification of Refillable Transportable Seamless Aluminium Alloy Gas Cylinders as per IS 15660 : 2006 (under Normal Certification Scheme without lot inspection by BIS)   24-11-2010    
760   CMD-III   CMD-III/G-14(609)   Fixation of Marking Fee for Certification of Pressed Ceramic Tiles as per IS 15622 : 2006   24-11-2010    
761   CMD-III   CMD-III/G-5   Farewell to Shri S.K. Bhatia, Sc-F & Head (CMD-III) on Retirement   24-11-2010    
762   CMD-III   STI/2418/6   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF TUBULAR FLUORSCENT LAMPS FOR GENERAL LIGHTING SERVICE ACCORDING TO IS: 2418 (Part I): 1977 (Incorporating Amendments 1 to 7)   23-11-2010    
763   CMD-III   CMD III/16:2418(Pt 1)   Implementation of Amendment No. 6&7 to IS 2418(Pt.1): 1977 – Specification for Tubular Fluorescent Lamps for General Lighting Services.   23-11-2010    
764   CMD-III   CMD III/16:15111(Pt 1&2)   Implementation of Amendment No.4 to IS 15111(Pt.1): 2002 - Self ballasted Lamps for General Lighting Services – Safety Requirements.   23-11-2010    
765   CMD-III   STI/10322 (Pt.5) (Sec 3)/1   Scheme of Testing and Inspection for Certification of LuminaItes for Road ad Street Lighting According to IS : 10322 (Pt.5) (Sec 3) - 1987   23-11-2010    
766   CMD-II   CMD-II/16:3811   Implementation of revised IS 3811 and Amendment No.1   23-11-2010    
767   CMD-II   CMD-II/16:7976   Amendment No.2 to IS 7976:1976   19-11-2010    
768   CMD-III   STI/15660/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF REFILLABLE TRANPORTABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS ACCORDING TO IS 15660:2006   18-11-2010    
769   CMD-III   CMD-III/16:15660   Implementation of Scheme of Testing and Inspection for Certification of Refillable Transportable Seamless Aluminium Alloy Gas Cylinders according to IS 15660: 2006 {Doc:STI/15660/1, November 2010}.   18-11-2010    
770   CMD-III   CMD-III16:15633   Postponement of Date of Implementation of Pneumatic Tyres and Tubes for AutomotiveVehicles(Quality Control) Order, 2009   18-11-2010    
771   CMD-III   CMD III/16: 8144   Implementation of Amendment No.2 to IS 8144: 1997 - Specification for Multipurpose Dry Batteries   18-11-2010    
772   CMD-III   CMD-III/16:273   Marking Fee for Picks and Beaters as per IS 273 : 1990   18-11-2010    
773   CMD-III   CMD-III/16:15622   Implementation of Scheme of Testing and Inspection for Certification of Pressed Ceramic Tiles according to IS 15622 : 2006 [Doc: STI/15622/1, Nov. 2010 ]   18-11-2010    
774   CMD-III   CMD-III/16:8423   STI for certification of controled percolating hose for fire fighting according to IS : 8423-1994   8-11-2010    
775   CMD-III   CMD-III/16:11501   STI for Certifcate of Engine Monoset pumps for clear, cold, fresh water for agriculture purposes according to IS 11501:1986   8-11-2010    
776   CMD-III   CMD-III/16:11170/602   STI for Certification of constant Speed Compression Ignition (Diesel) Engines for Agricultural Purposes(Up to 20KW)as per IS 11170:1985 (Including Amendments No. 1 to 4)   8-11-2010    
777   CMD-III   STI/10109/4   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF OIL PRESSURE STOVES, OFFSET BURNER TYPE ACCORDING TO IS 10109:2002 (First Revision) (Incorporating Amendment No. 1 to 3)   27-10-2010    
778   CMD-III   CMD-III/16:10109(600)   Implementation of Amendment No.3, Sepetember 2010 to IS 10109 : 2002 Specification for Oil Pressure Stoves - Offset Burner Type.   27-10-2010    
779   CMD-II   CMD-II/16:11785   Amendment No.3 to IS 11785:1986   22-10-2010    
780   CMD-III   STI/14772/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ENCLOSURES FOR ACCESSORIES FOR HOUSE HOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS ACCORDING TO IS 14772:2000   18-10-2010    
781   CMD-II   CMD-II/16:pesticide   Comments from all Bos   18-10-2010    
782   CMD-II   CMD-II/16:3906   Implementation of Amendment No.2 to IS 3906   18-10-2010    
783   CMD-II   CMD-II/16:11785   Amendment No.3 to IS 11785:1986   18-10-2010    
784   CMD-II   CMD-II/16:7976   Amendment No.2 to IS 7976:1976   18-10-2010    
785   CMD-II   CMD-II/16:1825   Implementation of Amendment No.3 to IS 1825   18-10-2010    
786   CMD-III   STI/5244/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SAFE DEPOSIT LOCKER CABINETS ACCORDING TO IS 5244:1991 (Including Amendment No.1)   18-10-2010    
787   CMD-III   CMD-III/16:3652   Implementation if Amendment No.3 to IS 3652:1995 - Specification for Crop Protection Equipment - Foot Sprayer   13-10-2010    
788   CMD-III   CMD-III/16:4449   Implementation of revised IS 4449 and Amendment No.1   13-10-2010    
789   CMD-III   CMD-III/16:14251   Amendment No.2 to IS 14251   13-10-2010    
790   CMD-III   CMD-III/16:12005:1987   Amendment No.3 to IS 12005:1987   13-10-2010    
791   CMD-III   CMD-III/16:9523   Implementation of Amendment No.2 issued to IS 9523:2000 - Ductile Iron Fittings for Pressure Pipes for water. Gas & Sewage   11-10-2010    
792   CMD-III   CMD III/16: 14724   Product description in CMMS as per IS 14724:1999 with amendment no.2.   8-10-2010    
793   CMD-III   CMD-III/16:13000   Amendment No. 1 to Doc: STI/13000/1, Feb 2001   29-9-2010    
794   CMD-III   CMD-III/16:1534(part 1)   IS 1534 (Part 1) : 1977 Specification for Ballasts for Flourocent Lamps (for Switch Start Circuit)   29-9-2010    
795   CMD-III   CMD-III/16:2641   Scheme of Testing and Inspection for Certification of Electric Welding Accessories   29-9-2010    
796   CMD-III   STI/2705(pt.2)/2   Scheme of Testing and Inspection for Certification of Measuring current transformers according to IS 2705 (part 2): 1992   28-9-2010    
797   CMD-III   CMD-III/16:1391(pt.2)1   STI for IS 1391(pt.2) 1992 Room Air Conditioner Part 2 - Split Air Conditioner   28-9-2010    
798   CMD-III   CMD-III/16:1391(part1)   Implementation of Amendment No.2 October 2000 to IS 1391(part 1) :1992   28-9-2010    
799   CMD-III   CMD-III/16:1391(part2)   Implementation of Amendment No.2, December 2006 to IS 1391:1992 (part 2) for Room Air Conditioners (split)   28-9-2010    
800   CMD-III   CMD-III/16:14885   14885:2001 Polyethylene Pipes for the supply of Gaseous Fuels according to IS 14885:2001   28-9-2010    
801   CMD-III   CMD-III/16:14885   Implementation of Amendment No. 5 to IS 14885:2001 Specification for Polyethylene Pipes for the Supply of Gaseous Fuels   28-9-2010    
802   CMD-III   CMD-III/16:14885   Implementation of Amendment No.2, April 2007 to IS 14885:2001 for Polyethylene Pipes for the Supply of Gaseous Fuels.   28-9-2010    
803   CMD-III   STI/3099(pt2)   Scheme of Testing and Inspection for Certification of Microscopes - Slides according to IS 3099(pt2):1992   27-9-2010    
804   CMD-III   STI/2593/3   Scheme of Testing and Inspection for Certification of Flexible Cable for Miner's Cap-Lamps according to IS:2593-1984   27-9-2010    
805   CMD-III   CMD-III/16:15111(pt 1&2)/592   Marking and Description of the product as per IS 15111(pt 1&2):2002   21-9-2010    
806   CMD-III   CMD-III/16:8034,9079,4220   Procedure of re- certification of pumps by BIS   17-9-2010    
807   CMD-III   CMD-III/16:60947-3   Implementation of IS / IEC 60947-3 : 1999 superceding IS 13947(pt.3) : 1993   17-9-2010    
808   CMD-III   STI/7347/3   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SMALL SIZE SPARK IGNITION ENGINES FOR AGRICULTURAL WATER PUMPS, SPRAYERS, TILLERS, REAPERS AND OTHER SIMILAR APPLICATIONS ACCORDING TO IS 7347: 1974 (Incorporating upto Amendment No.2)   16-9-2010    
809   CMD-III   STI/7347/Imported/2   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF IMPORTED SMALL SIZE SPARK IGNITION ENGINES FOR AGRICULTURAL WATER PUMPS, SPRAYERS, TILLERS, REAPERS AND OTHER SIMILAR APPLICATIONS ACCORDING TO IS 7347: 1974(Incorporating upto Amendment No.2)   16-9-2010    
810   CMD-III   CMD-III/16:7347   Implementation of Amendment No.2, October 2008 to IS 7347:1974 Specification for Performance of Small Size Spark Ignition Engines for Agricultural Sprayers and Similar Applications and Revised STIs.   16-9-2010    
811   CMD-III   STI/13098/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF AUTOMOTIVE VEHICLES TUBES FOR PNEUMATIC TYRES ACCORDING TO IS 13098:1991   16-9-2010    
812   CMD-III   CMD-III/16:8034   Mentioning of Model No. of Submersible Pump Sets in the licence Document / Endorsement   14-9-2010    
813   CMD-III   CMD-III/16:15633,15636,15627,13098   Processing of Application for Grant of Licence for Automotive Tyres/Tubes on Top Priority in view of Implementation of Quality Control Order w.e.f. 14 November 2010   14-9-2010    
814   CMD-III   CMD-III/16:10109   Implementation of Amendment No.1, October 2005 to IS 10109:2002 - Oil Pressure Stoves - Offset Burner type - Specification   10-9-2010    
815   CMD-II   CMD-II/16:13428   Implementation of Amendment Nos. 3, 4 & 5 to IS 13428:2005   9-9-2010    
816   CMD-III   CMD-III/16:6901(585)   Proposal for Implementation of revised standard IS 6901:2009, Specification for Pressure Regulators for Gas Cylinders used in Welding, Cutting and Related Processes and Revised Doc : STI/6901/3 january, 2010   9-9-2010    
817   CMD-III   CMD-III/16:14561(583)   IMPLEMENTATION OF SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF FIRE RESISTING (INSULATING) FILING CABINETS ACCORDING TO IS 14561 : 2007 (Doc: STI/14561/1, September 2010)   7-9-2010    
818   CMD-III   CMD-III/16:3062   Implementation of Amendment No.2 to IS 3062   6-9-2010    
819   CMD-III   Amendment No.1 IS 5825:1993   Amendment No. 1 August 2010 to IS 5825:1993 test procedure for the determination of the temperature index of enamelled winding wires (first revision)   3-9-2010    
820   CMD-III   CMD-3/16:13730   Publication of Amendment No.1 August 2010 to IS 5825:1993   3-9-2010    
821   CMD-II   STI/3309/6   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SOLUBLE COFFEE CHICORY POWDER ACCORDING TO IS 3309:1992 (Including Amendment No. 1, 2 & 3)   31-8-2010    
822   CMD-III   STI/8035/2   Scheme of Testing and Inspection for Certification of Shallow Well Handpump according to IS 8035 : 1999   31-8-2010    
823   CMD-III   CMD-III/16:8737   Implementation of Amendment No.2, March 2007 to IS 8737 : 1995 Valve Fittings for use with Liquefied Petroleum Gas (LPG) Cylinders of more than 5-Litre Water Capacity.   30-8-2010    
824   CMD-III   STI/10002/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF CONSTANT SPEED COMPRESSION IGNITION (DIESEL) ENGINE FOR GENERAL PURPOSES (ABOVE 20 kW) ACCORDING TO IS: 10002-1981   30-8-2010    
825   CMD-III   STI/7586/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF FRICTION PROPS FOR MINES ACCORDING TO IS 7586:1975   30-8-2010    
826   CMD-III   STI/8749/3   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF BIO GAS STOVE ACCORDING TO IS 8749:2002 (Second Revision)   30-8-2010    
827   CMD-III   STI/1879   DRAFT SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF MALLIABLE CAST IRON PIPE FITTINGS ACCORDING TO IS: 1879:2010 (Third Revision)   30-8-2010    
828   CMD-III   CMD-III/16:3196 (Part 1)   Implementation of Amendment No.4,July 2010 to IS3196 (Part 1) 2006 Specification for Welded Low Carbon Steel Cylinders Exceeding 5 Litre Water Capacity for Low Pressure Liquefiable Gases, Part1 Cylinders for Liquefied Petroleum Gases (LPG)(Fifth Revision)   27-8-2010    
829   CMD-III   CMD-III/16:7142   Implementation of Revised STI for Welded Low carbon Steel Cylinders for Low Pressure Liquefiable Gases not Exceeding 5 litre Water Capacity as per IS 7142 : 1995, Doc : STI/7142/3, Jan 1999   26-8-2010    
830   CMD-III   CMD-III/16:4521   Implementation of revised IS 4521: 2001 Wire Ropes used in Oil Wells and Oil Well Drilling and revised STI (Doc: STI/4521/2 April 2003)   26-8-2010    
831   CMD-III   CMD-III/16:1879(578)   Proposal for Implementation of revised IS 1879 : 2010 Specification for Malleable Cast Iron Pipe Fittings (third revision)   26-8-2010    
832   CMD-III   STI/2980/6   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF NON-PRESSURE STOVES ACCORDING TO IS 2980:1999 (Incorporating Amendment no.1, 2 & 3)   26-8-2010    
833   CMD-III   CMD-III/16:2980   Implementation of Amendment No.3, July 2010 to IS 2980 : 1999 Specification for Non-pressure Stoves (Third Revision)   26-8-2010    
834   CMD-III   STI-204 (part-2)/5   Scheme of Testing and Inspection for Certification of Tower Bolts (non-ferrous metals) according to IS:204(part-2) 1992 (fifth revision)   23-8-2010    
835   CMD-III   CMD-III/16:3196(575)   Publication of Amendment No.2 July 2010 to IS 13258:1991   23-8-2010    
836   CMD-III   CMD-III/16:6315(576)   Implementation of Amendment No. 1, August 2010 to IS 6315:1992 Specification for floor Springs (Hydraulically Regulated) for Heavy Doors   23-8-2010    
837   CMD-III   CMD-III/16:1391(part1)(572)   Implementation of Amendment No.4. August 2010 to IS 1391(part-1) : 1992 Specification for Room Air Conditioners - Part 1 Unitary Air Conditioners (second revision)   23-8-2010    
838   CMD-III   CMD-III/16:2202(part 1)   Implementation of Revised IS 2202(part 1): 1999 - (6th Revision) and STI Doc: STI/2202(pt 1) / 11, August 1999   20-8-2010    
839   CMD-III   CMD-III/16:3196(part 1)(533)   Implementation of Amendment No.4, July 2010 to IS 3196 (part1)2006 Specification for Welded Low Carbon Steel Cylinders Exceeding 5 Litre Water Capacity for Low Pressure Liquefiable Gases,Part1 Cylinders for Liquefied Petroleum Gases (LPG) (fifth revision)   20-8-2010    
840   CMD-III   CMD-III/16:15490(571)   Implementation of Amendment No.3, July 2010 to IS 15490:2004 Specification for Cylinders for On-board Storage of Compressed Natural Gas as a Fuel for Automotive Vehicles   20-8-2010    
841   CMD-III   CMD-III/16:113021(pt 2)(570)   Clarifications on material for outer body of Ballasts as per IS 13021   20-8-2010    
842   CMD-III   CMD-III/16:6315   Revision of Scheme of Testing and Inspection for Floor Springs (hydraulically Regulated) for Heavy Doors as per IS:6315 - 1992   20-8-2010    
843   CMD-III   CMD-3/16:3196   First Fill Leak (FFL) Cases of LPG Cylinders as per IS 3196 reported by oil companies – clarifications on note: CMD-III/16:3196 dated 23 November2009   20-8-2010    
844   CMD-III   CMD-III/16:710   Proposal for Implementation of Revised IS 710 : 2010 Specification for Marine Plywood (second revision)   20-8-2010    
845   CMD-III   CMD-III/16:3315   Implementation of Amendment No.1 May 2004 to IS 3315:1994 Evaporative Air Coolers (Desert Coolers) and Amendment No.1 to STI, Doc: STI/3315/2 October 1994   19-8-2010    
846   CMD-III   CMD-III/16:1391(part 2)(561)   Implementation of Amendment No.3, July 2010 to IS 1391(part 2) : 1992 Specification for Room Air Conditioners - Part 2 Split Air Conditioners (Second Revision)   19-8-2010    
847   CMD-III   CMD-III/16:2556(part 15)   Implementation of Amendment No.1, August 2010 to IS 2556(part15):2004 Specification for Vitreous Sanitary Appliances (Vitreous China)-part 15, Specific Requirements of Universal water Closets   19-8-2010    
848   CMD-III   CMD-III/16:14846(566)   Implementation of Amendment No.3, August 2010 to IS 14846:2000 Specification for Sluice Valves for Water Works Purposes (50 to 1200mm size)   19-8-2010    
849   CMD-III   CMD-III/16:3623   Revised Scheme of Testing and Inspection based on IS:3623-1978   19-8-2010    
850   CMD-III   STI/11037/1   Scheme of Testing and Inspection for Certification of Electronic Type Fan Regulators according to IS:11037-1984   19-8-2010    
851   CMD-III   STI/3459/2   Scheme of Testing and Inspection for Certification of Small Wire Ropes according to IS 3459:1977   19-8-2010    
852   CMD-III   CMD-III/16:12817   Implementation of Amendment No. 1, to IS 12817:1997, Specification for Stainles Steel Butt Hinges   18-8-2010    
853   CMD-III   CMD-III/16:5504(124)   Implementation of Amendment No.3, April 2008 to IS 5504:1997 for Spiral Welded Pipes   18-8-2010    
854   CMD-III   CMD-III/16:204(part-1)(567)   Amendment No.2, August 2010 to IS 204 (part 1) : 1991 Specification for Tower Bolts, Part 1 Ferrous Metals (fifth revision)   18-8-2010    
855   CMD-III   CMD-III/16:550(part-1)   Grouping Guidelines for Considering Grant of Licence / Inclusion of New Varieties / drawal of samples, etc. for Certification of Safes as per IS 550(pt.1) : 2003   18-8-2010    
856   CMD-III   CMD-III/16:14846   Amendment No.1 of STI doc:sti/14846/1 December 2000 for Certification of Sluice valve for water works purposes (50 to 1200 mm sizes) according to IS 14846:2000   18-8-2010    
857   CMD-III   CMD-III/16:3074(562)   Implementation of Amendment No.2, June 2010 to IS 3074:2005 Specification for Steel Tubes for Automotive purposes (second revision)   18-8-2010    
858   CMD-III   CMD-III/16:5504(563)   Implementation if Amendment No.4, June 2010 to IS 5504 : 1997 Specification for Spiral Welded Pipes (first revision)   18-8-2010    
859   CMD-III   CMD-III/16:1993(564)   Implementation of Amendment No.1, july 2010 to IS 1993 : 2006 / ISO 11949 : 1995 Cold-Reduced Electrolytic Tinplate (fourth revision)   18-8-2010    
860   CMD-III   CMD-III/16:7098(part 3)   Implementation of Amendment No.2 , February 2007 to IS 7098(part-3) : 1993 - Cross-Linked Polyethylene Insulated Thermoplastic Sheathed Cables.   13-8-2010    
861   CMD-III   CMD-III/16:8808(560)   Implementation of Amendment No.4, July 2010 to IS 8808 : 1999 Burners for Oil Pressure Stoves and Oil Pressure Heaters   10-8-2010    
862   CMD-III   CMD-III/16:1238   Implementation of revised IS 1238:2005 Hurricane Lanterns and revised STI's (doc:STI/1238/2 july 2005)   9-8-2010    
863   CMD-III   STI-2365/2   Scheme of Testing and Inspection for Certification of Steel Wire Suspension Ropes for Lifts, Elevators and Hoists According to IS:2365-1977 (first revision)   9-8-2010    
864   CMD-III   CMD-III/16:2581   Implementation of revised IS 2581:2002 Round Strand Galvanized Steel Wire Ropes for Shipping purposes (Fourth revision) and revised STI (doc: STI/2581/5 dec 2003)   9-8-2010    
865   CMD-III   CMD/16:2712   Compressed Asbestos Fiblre Jointings   9-8-2010    
866   CMD-III   CMD-III/16:9523(559)   Implementation of Amendment No.1, June 2010 to IS 9523:2000 Specification foe Ductile Iron Fittings for Pressure Pipes for Water, Gas and Sewage (first revission).   5-8-2010    
867   CMD-III   CMD-III/16:6932(part 7)   Implementation of Amendment No. 4, July 2010 to IS 6932 (part7) : 1973 Methods of Tests for Building limes, part-7 Determination of Compressive and Strengths.   3-8-2010    
868   CMD-III   CMD-III/G-1   Clarifications regarding implementation of the revised cross referred ISS/amendments to the cross referred ISS   3-8-2010    
869   CMD-III   CMD-III/16:2556(part-2)   Implementation of Amendment No.2 July 2010 to IS 2556(part 2) : 2004 vitreous sanitary appliances (vitreous china), part 2 Specific requirements of Washdown Water Closets (fifth revision)   2-8-2010    
870   CMD-III   CMD-III/16:15633,36,27,13098   Processing of Application for Grant of Licence for Automotive tyres/tubes on top priority in view of Implementation of Quality Control Order w.e.f. 14 November 2010   29-7-2010    
871   CMD-III   CMD-III/16:14616   Implementation of Amendment No.3 Nov.2009 to IS 14616:1999 Laminated Veneer lumber and revised STI (doc: sti/14616/3,dec 2009)   29-7-2010    
872   CMD-III   CMD-III/16:15391   Implementation of Amendment No.3,July 2010 to IS 15391 : 2003 Specification for Cold Rolled Non-Oriented Electrical Steel She and Strip – Semi-processed Type   29-7-2010    
873   CMD-III   CMD-III/16:9798   Composition of materials as per IS 9798:1995 - low pressure regulators for use with liquified petroleum gas (lpg) mixtures.   28-7-2010    
874   CMD-III   STI/15636/FM/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF AUTOMOTIVE VEHICLES – PNEUMATIC TYRES FOR COMMERCIAL VECHICLES – DIAGONAL AND RADIAL PLY ACCORDING TO IS 15636 :2005   22-7-2010    
875   CMD-III   STI/15633/FM/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF AUTOMOTIVE VEHICLES – PNEUMATIC TYRES FOR PASSENGER CAR VECHICLES – DIAGONAL AND RADIAL PLY ACCORDING TO IS 15633:2005   22-7-2010    
876   CMD-III   CMD-III/16:13592   Implementation of Amendment No.5, Feb 2009 to IS 13592:1992 Unplastisized Polyvinyl Chloride (UPVC) Pipes for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water Systems   20-7-2010    
877   CMD-III   CMD-III/16:1239(part-2)   Implementation of Amendment No 7, July to IS 1239 (part 2): 1992 Specification for Steel Tubes, Tubulars and Other Wrought Steel Fittings, part2 Mild Steel Sockets Tubulars and Other Wrought Steel Pipes Fittings (fourth revision)   20-7-2010    
878   CMD-III   CMD-III/16:11722   Implementation of Amendment No 4.June 2010 to IS 11722 : 1986 Specification for Thin Walled Flexible Quick Coupling Pipes   20-7-2010    
879   CMD-III   CMD-III/16:513(547)   Implementation of Amendment No.1, July 2010 to IS 513 : 2008 Cold Reduced Low Carbon Steel Sheet and Strip (fifth revision)   20-7-2010    
880   CMD-III   CMD III/16:60079-1   Implementation of revised IS/IEC 60079 series of Standards and clarification regarding testing thereof.   16-7-2010    
881   CMD-III   CMD III/16:13429   Implementation of Amendment no.2 June 2010 to IS 13429(Pt.3):2000 Solar Cooker-Box type – Test methods.   16-7-2010    
882   CMD-III   CMD-III/16: 3832 (69)   Grouping of sizes for Hand-Operated Chain Pulley Blocks as per IS 3832: 2005   13-7-2010    
883   CMD-III   CMD-III/16:779   Implementation of IS 779:1994 "Water Meters (Domestic Type)"   13-7-2010    
884   CMD-III   CMD-III/16:15633   Installed Capacity of Automotive Tyre & Tube units being brought under mandatory BIS certification w.e.f. 14.11.2010   13-7-2010    
885   CMD-III   CMD-III/16:204(part 2)   Grouping Guidelines for Grant of Licence / Inclusion of additional varieties of Tower Bolts (Non Ferrous Metals) as per IS 204(part2) : 1992   12-7-2010    
886   CMD-III   CMD III/16:398(Pt 5)   Frequency of testing on completed conductor as per IS 398(Pt.5) in the STI.   9-7-2010    
887   CMD-III   CMD-III/16:1729(542)   Implementation of Amendment No.4,June 2010 to IS 1729 : 2002 Specification for Cast Iron/ Ductile Iron Drainage Pipes and Pipe Fittings for Over Ground Non-Pressure Pipeline Socket and Series (Second Revision)   9-7-2010    
888   CMD-III   CMD III/16:2347   Implementation of Amendment No.1 of IS 2347:2006 along with revised STI   7-7-2010    
889   CMD-II   CMD-II/16:13428   Implementation of Amendment No.3 to IS 13428 : 2005   6-7-2010    
890   CMD-II   STI/15757/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF FOLLOW-UP FORMULA - COMPLEMENTARY FOODS ACCORDING TO IS 15757: 2007 (Incorpoting amendment no.1 )   6-7-2010    
891   CMD-II   CMD-II/16:15757   Correction of STI for IS 15757:2007 (to be read with Amendment Nos.1 & 2)   6-7-2010    
892   CMD-III   CMD-III/16:15633(537)   Comments on STI for Automotive Tyres as per IS 15627, IS 15633 & IS 15636   5-7-2010    
893   CMD-III   CMD-III/16:1239(pt1)536   Implementation of Amendment No.4, June 2010 to IS 1239(pt1):2004 Steel Tubes, Tubulars and Other Wrought Steel Fittings (part 1- Steel Tubes)   5-7-2010    
894   CMD-III   CMD-III/16:15633   Processing of Application for Grant of Licence for Automotive Tyres/Tubes on Top Priority in view of Implementation of Quality Control Order w.e.f. 14 November 2010   1-7-2010    
895   CMD-III   STI-2681/2   Scheme of testing and inspection for Certification of Non-Ferrous Metal Sliding Door Bolts (aldrops) for use with Padlocks according to IS 2681-1993 (third revision)   1-7-2010    
896   CMD-III   STI/204(part-1)/5   Scheme of testing and inspection for Certification of Tower Bolts (ferrous metal) according to IS : 204(part 1) 1991.(fifth revision)   1-7-2010    
897   CMD-III   CMD-III/16:12933 (Pt.5)   Implementation of Amendment No.5, June 2010 to IS 12933 (Pt.5):2003 Specification for Solar Flat Plate Collector – Test Methods   1-7-2010    
898   CMD-II   CMD-II/16: 15907   Implementation of Amendment No.1 to STI, Doc:STI/15907/1 May 2010   1-7-2010    
899   CMD-II   CMD-II/16: 15907   Policy Guidelines for Grant of Licence for Agro Textiles – High Density Polyethylene (HDPE) Woven Beds for Vermiculture as per IS 15907:2010.   1-7-2010    
900   CMD-III   CMD-III/16:6908   Draft Grouping guidelines for Asbestos Cement Pipes & Fittings for sewerages & drainages as per IS 6908:1991   29-6-2010    
901   CMD-III   STI/10325/5   Scheme of testing and inspection for certification of Sqaure Tins-15 kg/litre for Ghee, Vanaspati Edible Oils and Bakery Shortenings according to IS 10325:2000 (second revision)   25-6-2010    
902   CMD-III   CMD-III/16:1538(527)   Implementation of Amendment No.4 June 2010 to IS 1538:1993 Cast Iron Fittings for Pressure Pipes for Watre, Gas and Sewage(Third Revision)   25-6-2010    
903   CMD-III   CMD-III/16:7181(528)   Implementation of Amendment No.3 June 2010 to IS 7181:1986 Specification for Horizontally Cast Iron Double Flanged Pipes for Water, Gas and Sewage (first revision)   25-6-2010    
904   CMD-III   CMD-III/16:1536(529)   Implementation of Amendment No.4 June 2010 to IS 1536:2001Specification for Centrifugally Cast (spun) Pressure Pipes for Water, Gas and Sewage (fourth revision)   25-6-2010    
905   CMD-III   CMD-III/16:1537(530)   Implementation of Amendment No.6 June 2010 to IS 1537 : 1976 Specification for Vertically Cast Iron Pressure Pipes for Water, Gas and Sewage (first revision)   25-6-2010    
906   CMD-III   CMD III/16: 374   Supply of Electric Ceiling type Fans with out Regulators as per IS 374:1979.   25-6-2010    
907   CMD-III   STI/369/7   Scheme of Testing and Inspection for certification of Electric radiators according to IS 369:1992   22-6-2010    
908   CMD-II   STI/2512/2   Scheme of Testing and Inspection for Certification of Miner's cap lamp batteries (lead acid type) according to IS 2515-1978   22-6-2010    
909   CMD-III   STI/2997/1   Scheme of testing and Inspection for certification of Aircirculator type Electric Fans & Regulators according to IS 2997:1964   22-6-2010    
910   CMD-III   CMD III/16:4533   Implementation of IS 4533:1995 superceding IS 4533:1978 – Suction Apparatus   21-6-2010    
911   CMD-III   STI/60079-11/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ELECTRICAL EQUIPMENT FOR USE IN EXPLOSIVE ATMOSPHERES PART 11 – EQUIPMENT PROTECTION BY INTRINSIC SAFETY “i” ACCORDING TO IS/IEC 60079-11:2006   21-6-2010    
912   CMD-III   CMD III/16:60079-11   Implementation of IS/IEC 60079-11:2006 superceding IS 5780:2002 – EXPLOSIVE ATMOSPHERES; PART 11 – EQUIPMENT PROTECTION BY INTRINSIC SAFETY “i”   21-6-2010    
913   CMD-III   CMD III/16: 335 & 12463   Proposal for Revision of IS 335:1993 & Withdrawal of IS 12643:1988   21-6-2010    
914   CMD-III   CMD-III/16:784(521)   Implementation of Amendment No.2, September 2005 to IS 784:2001 Prestressed Concrete pipes (including specials)   17-6-2010    
915   CMD-III   STI/60079-7/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ELECTRICAL EQUIPMENT FOR USE IN EXPLOSIVE ATMOSPHERES PART 7 – EQUIPMENT PROTECTION BY INCREASED SAFETY “e” ACCORDING TO IS/IEC 60079-7:2006   17-6-2010    
916   CMD-III   CMD III/16:60079-7   Implementation of IS/IEC 60079-7:2006 superceding IS 6381:2004 – EXPLOSIVE ATMOSPHERES; PART 7 – EQUIPMENT PROTECTION BY INCREASED SAFETY “e”   17-6-2010    
917   CMD-III   STI/60079-1/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ELECTRICAL EQUIPMENT FOR USE IN EXPLOSIVE ATMOSPHERES PART 1 – EQUIPMENT PROTECTION BY FLAMEPROOF ENLCOSURES “d” ACCORDING TO IS/IEC 60079-1:2007   17-6-2010    
918   CMD-III   CMD III/16:60079-1   Implementation of IS/IEC 60079-1:2007 superceding IS 2148:2004 – ELECTRICAL EQUIPMENT FOR USE IN EXPLOSIVE ATMOSPHERES PART 1 – EQUIPMENT PROTECTION BY FLAMEPROOF ENLCOSURES “d”   17-6-2010    
919   CMD-III   CMD-III/16:13620   Fusion Bonded epoxy coated reinforcing bars   15-6-2010    
920   CMD-III   CMD-III/16:15265(520)   Implementation of scheme of testing and inspection for certification of flexible PVC pipes or polymer reinforced thermoplastic hoses for suction and delivery lines of agricultural pumps according to IS 15265:2003 (sti/15265/1, june)   15-6-2010    
921   CMD-III   CMD-III/16:9763   All India First Licence (518)   10-6-2010    
922   CMD-III   CMD-III/16:6078/13098/11552   All India First Licence   10-6-2010    
923   CMD-III   CMD-III/16:8329   Guidelines for grouping of sizes for Centrifugally Cast (Spun) Ductile iron pressure Pipes for Water, Gas and Sewage According To IS 8329:2000   10-6-2010    
924   CMD-III   CMD-III/16:2830(516)   Guidelines for grouping of grades for carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purpose according to IS 2830: 1992   9-6-2010    
925   CMD-III   CMD-III/G-14(515)   Fixation of Marking Fee for Certification of Flexible PVC Pipe for Polymer Reinforced Thermoplastic Hose or Suction and Delivery Line of Agricultural Pumps as per IS 15265 : 2003   9-6-2010    
926   CMD-III   CMD-III/16:Tyres/512   Implementation of Quality Control Order 2009 & Certification Tyres and Tubes (IS 15627, IS 15633, IS 15636 & IS 13098)   7-6-2010    
927   CMD-III   CMD-III/16:6901   Comments on revised draft STI for IS 6901:2009   4-6-2010    
928   CMD-III   CMD-III/16:8329   Scheme of Testing and Inspection for Certification of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water,Gas and Sewage According to IS 8329 : 2000   3-6-2010    
929   CMD-III   CMD-III/16:1786   Marking on HSD Bars as per IS 1786:2008   3-6-2010    
930   CMD-III   CMD-III/16:1293   Clarifications on use of flexible cable of 0.5sq mm for non-rewirable accessories and Implementation of Amendment No.4 with respect to resistance to heat for moulded plugs as per IS 1293:2005   2-6-2010    
931   CMD-III   CMD-III/G-1/508   Products which are most popular in Micro, Small and Medium Industries and are certifiable under BIS Product Certification Scheme.   31-5-2010    
932   CMD-III   CMD-III/16:7312   Implementation of Amendment No.3 February 2007 to IS 7312:1993 for Welded and Seamless Steel Dissolved Acetylene gas Cylinders and revised STI Doc:sti/7312/4 december 2007.   28-5-2010    
933   CMD-III   CMD-III/16:7577   Revision of IS:7577 Specification for Gas Testing flame safety lamps   25-5-2010    
934   CMD-III   CMD-III/16:1475   Implementation of revised STI for Certification of Self-contained drinking water coolers Part1 Energy consumption and performance as per IS 1475 (part 1) :2001 (3rd revision),Doc:STI/1475(part1)/4 feb 2002   25-5-2010    
935   CMD-III   CMD-III/16:11480   Implementation of Amendment No.1 july 2004 to IS 11480 :1998 Domestic Grillers for use with liquefied petroleum gases and revised STI, Doc:STI/11480/3 July 2004   25-5-2010    
936   CMD-III   CMD-III/16:3196(part4)   Implementation of Amendment No.1 March 2003 to IS 3196(part4):2001 and revised STI(Doc:STI/3196(pt4)/2) july2003   25-5-2010    
937   CMD-II   STI/15853/1   SCHEME OF TESTING AND INSPECTION FOR CERIFICATION OF TEXTILES – WOVEN SUITINGS MADE OF COTTON MAN –MADE FIBRES/ FILAMENTS AND THEIR BLENDS ACCORDING TO IS 15853:2009   25-5-2010    
938   CMD-II   STI /15852/1   SCHEME OF TESTING AND INSPECTION FOR CERIFICATION OF TEXTILES – WOVEN SHIRTINGS MADE OF COTTON MAN –MADE FIBRES/ FILAMENTS AND THEIR BLENDS ACCORDING TO IS 15852:2009   25-5-2010    
939   CMD-III   CMD-III/16:   Products which are most popular in Micro, Small and Medium Industries and are certifiable under BIS Product Certification Scheme.   25-5-2010    
940   CMD-III   CMD-III/16:9282   Implementation of revised IS 9282:2002 wire ropes strands for suspension bridge (1st revision) and revised STI( doc:sti/9282/2 dec 2003)   25-5-2010    
941   CMD-III   CMD-III/16:8311   Scheme if testing & inspection for certification of instrument jewels as per IS :8311-1976   25-5-2010    
942   CMD-III   CMD-III/16:8776   Implementation of Amendment No 1 to IS 8776:1988 Specification for valve Fittings for use with Liquiefied petroleum gas (LPG) cylinders upto and including 50 litre water capacity   25-5-2010    
943   CMD-III   STI-8421/1   Scheme if testing & inspection for certification of hydraulic props according to IS:8421-1977   25-5-2010    
944   CMD-III   STI-10805/2   Scheme of testing and inspection for certification of footvalves reflux valves or non-return valves and bore valves to be used in suction lines of agricultural pumping systems according to IS:10805-1986   25-5-2010    
945   CMD-III   CMD-III/16:884   Implementation of Amendment No.3, December 2008 to IS 884:1985 Specification for First Aid Hose reel for fire Fighting (First Revision) and revised STI(Doc:STI/884/4,June 2009)   20-5-2010    
946   CMD-III   CMD-III/16:7868   STI for Rotary Drill Rods, DOC: STI/7868/1, May 2010   20-5-2010    
947   CMD-III   CMD-III/16:1237   Revision of scheme of Testing and Inspection for cement concrete Flooring Tiles as per IS : 1237   19-5-2010    
948   CMD-III   STI/6471/1   Scheme of Testing and inspection for Certification of Spectrometer (Student type) according to IS 6471-1971   18-5-2010    
949   CMD-III   STI/8598   Scheme of Testing and inspection for Certification of Idlers and Idler sets for Belt Conveyors according to IS:8598 - 1987   18-5-2010    
950   CMD-III   STI-3686/1   Scheme of testing and inspection for certification of student type microscope according to IS:3686-1966   18-5-2010    
951   CMD-III   STI-4328/1   Scheme of testing and inspection for certification of monocular dissecting microscope according to IS : 4328-1967   18-5-2010    
952   CMD-III   CMD-III/16:2721   Implementation of revised IS 2721:2003 Galvanized Steel Chain Link Fence Fabric (second revision) and revised STI(doc:sti/2721/2 dec2003)   18-5-2010    
953   CMD-III   CMD-III/16:10891(part-1)   Implementation of revised IS 10891(part1):2001 Steel Wire Ropes for Aerial Ropeways part1 Haulage Ropes and revised sti (doc:sti/10891(part1)/2) april 2003   18-5-2010    
954   CMD-I   CMD-I/25:3   Seniority Wise list of officer visited under Foreign Manufacturer Certification Scheme   18-5-2010    
955   CMD-III   CMD-III/16:15633   Amendment in the Notification of the Govt. of india in the Ministry of Commerce and Industry.(Department of Industrial Policy and Promotion ) No.S.O.2953(E) dated 19 nov. 2009   18-5-2010    
956   CMD-III   CMD-III/16:3196   First Fill Leak (FFL) Cases of LPG Cylinders as per IS 3196 (part1) reported by oil companies and corrective actions taken by the manufacturers thereafter   17-5-2010    
957   CMD-III   CMD-III/16:2830   Draft guidelines for grouping of grades for carbon steel cast billet ingots,billets, blooms and slabs for re-rolling into steel for general structural purpose according To IS 2830: 1992   14-5-2010    
958   CMD-III   STI/302-2-24/2   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES REFRIGERATORS, FOOD-FREEZERS AND ICE-MAKERS ACCORDING TO IS 302-2-24:1994   14-5-2010    
959   CMD-II   CMD-II/IS:13334(p-1)   Testing of milk and milk products for contamination of melamine   13-5-2010    
960   CMD-II   STI/15907/1 May 2010   SCHEME OF TESTING AND INSPECTION FOR CERIFICATION OF AGRO-TEXTILES - HIGH DENSITY POLYETHYLENE (HDPE) WOVEN BEDS FOR VERMICULTURE ACCORDING TO IS 15907:2010   12-5-2010    
961   CMD-III   STI/3317/4   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF HYPODERMIC NEEDLES, REUSABLE TYPE ACCORDING TO IS 3317:2004 (incorporating amendment no.01)   12-5-2010    
962   CMD-III   CMD III/16:3317   Implementation of revised IS 3317:2004 superceding IS 3317:1983 – Hypodermic Needles, Reusable type.   12-5-2010    
963   CMD-III   STI/302-2-24/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES REFRIGERATORS, FOOD-FREEZERS AND ICE-MAKERS ACCORDING TO IS 302-2-24:1994   12-5-2010    
964   CMD-III   CMD-III/16:8329(502)   Draft Guidelines for grouping of grades for carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purpose according To IS 2830 : 1992   11-5-2010    
965   CMD-III   CMD-III/16:3854(78)   Implementation of Amendment No.5 October 2007 to IS 3854: 1997 Switches for Domestic and Similar Purposes.   10-5-2010    
966   CMD-III   CMD-III/16:550(part1)/501   Draft Grouping Guidelines for Safes as per IS 550(part1) : 2003 regarding drawal of samples for considering Grant of Licence / inclusion   7-5-2010    
967   CMD-III   CMD-III/16:5244(500)   Draft Grouping Guidelines for Safe Deposit Locker Cabinet as per IS 5244:1991 regarding drawal of samples for considering Grant of licence / inclusion   7-5-2010    
968   CMD-III   CMD-III/16:2347(499)   Finalized Amendment No.1 April 2010 to IS 2347 : 2006 Domestic Pressure Cookers - Specification (fifth Revision)   7-5-2010    
969   CMD-III   CMD-III/16:1161(152)   Implementation of Amendment No.3, May 2008 to IS 1161:1998 for Steel Tubes for Structural Purposes   5-5-2010    
970   CMD-III   CMD-III/16:13098(495)   Implementation of Amendment No.2, April 2010 to IS 13098:1991 Automotive Vehicles-Tubes for Pneumatic Tyres   5-5-2010    
971   CMD-III   CMD-III/16:2831(497)   Guidelines for implementing Amendment No.2 to IS 2831:2001   5-5-2010    
972   CMD-III   CMD/16:14846   Grouping Guidelines for IS 14846:2000 Sluice Valves for Water Works Purposes   4-5-2010    
973   CMD-III   CMD-III/16:8329   Draft guidelines for grouping of sizes for Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewage According To IS 8329: 2000   4-5-2010    
974   CMD-III   CMD-III/16:1659(493)   Certification of Block Boards as per IS 1659:2004   29-4-2010    
975   CMD-III   CMD-III/16:1835   Implementation of revised STI, DOC: STI/1835/5, April 2010   28-4-2010    
976   CMD-III   CMD-III/16:9537(Pt.3)   IS 9573 (Pt.3):1983 Conduits for Electrical Installations.   26-4-2010    
977   CMD-III   CMD-III/16:302-2-24   Fixation of Marking Fee for Safety of Household and Similar Electrical Appliances-Refrigerators, Food Freezers and Ice Makers as per IS 302-2-24:1994   20-4-2010    
978   CMD-III   CMD-III/16:6234(482)   Fixation of marking Fee including ECO Mark Requirements for Portable Fire Extinguishers Water Type (Stored Pressure) as per IS 6234:2003   20-4-2010    
979   CMD-III   CMD-III/16:8048   Fixation of Marking Fee for Electrocardiograph as per IS 8048 : 1985   20-4-2010    
980   CMD-III   CMD-III/16: Cement   Guidelines for procurement of Clinker from Clinker units located in India for Cement manufacturing   20-4-2010    
981   CMD-III   CMD-III/16:7868(486)   Fixation of Marking Fee for Rotary Drill Rods for Drilling Principally in Coal as per IS 7868:1984   20-4-2010    
982   CMD-III   CMD-III/16:10002(487)   Fixation of Marking Fee for Performance Requirements for Constant Sped Compression Ignition (Diesel) Engines for General Purposes (Above 20 KW) as per IS 10002:1981   20-4-2010    
983   CMD-III   CMD-III/16:704(484)   Fixation of Marking Fee for Crow Bars and Claw Bars as per IS 704 :1984   20-4-2010    
984   CMD-III   CMD-III/16:6078(485)   Fixation of Marking Fee for Lineman's Plier as per IS 6078:1986   20-4-2010    
985   CMD-III   CMD III/16: 374   Supply of Fans without Regulators as per IS 374:1979   20-4-2010    
986   CMD-III   STI/15652/2   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF INSULATING MATS FOR ELECRICAL PURPOSES ACCORDING TO IS 15652:2006 (Incorporating Amendment nos.1&2)   19-4-2010    
987   CMD-III   CMD III/16:15652   Amendment No.2 March 2010 to IS 15652:2006 – Insulating Mats for Electrical Purposes   19-4-2010    
988   CMD-III   CMD III/16:4533   Proposal for the implementation of IS 4533:1995 superceding IS 4533:1978 – Suction Apparatus   12-4-2010    
989   CMD-III   CMD III/16:12640   Implementation of Revised IS 12640 (Pt.1):2008 & IS 12640(Pt.2):2008   12-4-2010    
990   CMD-III   CMD III/16:15111(Pt.1&2)   Comments on Draft amendment No.8 to IS 15111(Pt.2):2002   12-4-2010    
991   CMD-III   CMD-III/16:6234   Implementation of Revised Scheme of Testing and Inspection for Portable Fire Extinguishers, Water Type (Stored Pressure) According to IS 6234 : 2003 [ Doc: STI/6234/4, March 2010 ]   5-4-2010    
992   CMD-III   CMD-III/16:13592   Implementation of Amendment No.5, February 2009 to IS 13592:1992 Unplastisized Polyvinyl Chloride (UPVC) Pipes for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain water System – Specification   31-3-2010    
993   CMD-III   CMD-III/16:15058   Scheme of Testing and Inspection for Certification of PVC Water-stops at Transverse Contraction Joints for use in Masonry and Concrete Dams According to IS 15058 : 2002   30-3-2010    
994   CMD-III   CMD-III/16:8442(475)   Proposal for Implementation of revised IS 8442:2008 Specification for Stand Post Type Water and Foam Monitor for Fire Fighting (first revision).   30-3-2010    
995   CMD-III   Clarification from TED   Clarification on Tyre sizes from TED   30-3-2010    
996   CMD-III   CMD-III/16:14402   Grouping of sizes for inclusion and Grant of licence for Glass Fibre Reinforced Plastics (GRP) pipes, Joints and Fittings for use for Sewerage, Industrial Waste and Water (other than Potable) as per IS 14402:1996.   26-3-2010    
997   CMD-II   CMD-II/16:3802   Amendment Nos. 2 & 3 to IS 3802:1992   22-3-2010    
998   CMD-II   CMD-II/16:2791   Amendment Nos. 3 & 4 to IS 2791:1992   22-3-2010    
999   CMD-III   CMD-III/16:6078   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF LINEMAN’S PLIER ACCORDING TO IS 6078:1986 (SECOND RIVISION)   17-3-2010    
1000   CMD-III   Amendment No. 2 To IS 13098:1991   Amendment No. 2 February 2010 To IS 13098:1991 Automotive Vehicles – Tubes for Pneumatic Tyres – Specification   16-3-2010    
1001   CMD-III   CMD-III/16:15111 (Pt.1 & 2)   Manufacture of CFL with Power Factor Less Than 0.85 as per IS 15111 (Part 1 & 2)   16-3-2010    
1002   CMD-I   CMD-1/1:1   Quoting of Pan No. of BIS in all the correspondences exchanged between BIS and the Licensees   15-3-2010    
1003   CMD-III   CMD III/16:15111(Pt.1&2)   Implementation of fresh amendment to be issued to IS 15111(Pt.2):2002   11-3-2010    
1004   CMD-III   CMD-III/16:12894   Scheme of Testing and Inspection for Certification of Pulverized Fuel Ash Lime Bricks as per IS 12894 : 2002 [ Doc: STI/12894/1, March 2010 ]   11-3-2010    
1005   CMD-III   CMD-III/16:3224   Extension of Date of implementation for Amendment No.2, January 2009 to IS 3224:2002, Valve Fittings for Compressed Gas Cylinders Excluding Liquefied Petroleum Gas (LPG) Cylinders   10-3-2010    
1006   CMD-I   CMD I/31   Amendment No. 15 to Operating Manual for Product Certification, 2004   9-3-2010    
1007   CMD-III   CMD-III/16:784   IS 784:2001 Specification for Prestressed Concrete Pipes (including specials)   5-3-2010    
1008   CMD-III   CMD-III/16   Manufacture of CFL with power factor less than 0.85   4-3-2010    
1009   CMD-III   CMD-III/16:15683(458)   Implementation of Amendment No.3, February 2010 to IS 15683 : 2006 Specification for Portable Fire Extinguishers, Performance and Construction   3-3-2010    
1010   CMD-III   CMD-III/16:13849(459)   Implementation of Amendment No.11, February 2010 to IS 13849 : 1993 Specification for Portable Fire Extinguishers, Dry Powder Type (Stored Pressure)   3-3-2010    
1011   CMD-III   CMD-III/16:2878(460)   Implementation of Amendment No.7, February 2010 to IS 2878:2004 Specification for Fire Extinguisher, Carbon Dioxide Type (Portable and Trolley Mounted) (Third Revision)   3-3-2010    
1012   CMD-III   CMD-III/16:9271(461)   Implementation of Amendment No.2, February 2010 to IS 9271 : 2004 Specification for Unplasticized Polyvinyl Chloride (UPVC) Single Wall Corrugated Pipes for Drainage(first revision)   3-3-2010    
1013   CMD-I   CMD-I/20:1:2   Test Reports from de-recognized laboratories for considering grant of licence under simplified procedure   3-3-2010    
1014   CMD-III   CMD III/ 16: 60898-1   Implementation of IS/IEC 60898-1:2002 superceding IS 8828:1996   3-3-2010    
1015   CMD-III   CMD-III/ Steel QC Order   Amendment in Steel and Steel Products (Quality Control) Second Order, 2008   3-3-2010    
1016   CMD-III   CMDIII-1611833(656)   Implementation of Amendment No.4, February 2010 to IS 11833 : 1986 Dry Powder Fire Extinguisher for Metal Fires   26-2-2010    
1017   CMD-III   CMDIII-1610658(452)   Implementation of Amendment No.8, February 2010 to IS 10658 : 1999 Specification for Higher Capacity Dry Power Fire Extinguisher (Trolley Mounted) first revision   26-2-2010    
1018   CMD-III   CMDIII-16:6234(654)   Implementation of Amendment No.3, February 2010 to IS 6234 :2003 Specification for portable fire extinguishers, water type (stored pressure) second version   26-2-2010    
1019   CMD-III   CMDIII-1613385(655)   Implementation of Amendment No.8, February 2010 to IS 13385 : 1992 Specification for Fire Extinguisher 50-litre Capacity Wheel Mountaed Water Type (Gas Certridge)   26-2-2010    
1020   CMD-III   CMD-III/16:13386(451)   Implementation of Amendment No.10, February 2010 to IS 13386:1992 for Fire Extinguisher 50litre Capacity - Mechanical Foam Type   24-2-2010    
1021   CMD-III   CMD-III/16:2171(453)   Implementation of Amendment No.6, February 2010 to IS 2171:1999 Specification for Portable Fire Extinguishers, Dry Powder (cartridge Type) (Fourth Revision)   24-2-2010    
1022   CMD-III   CMD-III/16:13098   IS 13098 :1991, Automotive Vehicles - Tubes for Pneumatic Tyre   24-2-2010    
1023   CMD-I   CMD-1/24:2   Amendment to the BIS Rules, 1987-Introduction of Registration Scheme   23-2-2010    
1024   CMD-I   CMD-1/24:2   Amendment to the BIS (Certification) Regulation, 1988   23-2-2010    
1025   CMD-III   CMD-III/16:704   Implementation of STI, DOC: STI/704/1 February 2010   23-2-2010    
1026   CMD-III   CMD-III/16:13098   Comments on revised draft STI for IS 13098: 1991   23-2-2010    
1027   CMD-III   CMD III/16:12640   Implementation of Revised IS 12640 (Pt.1):2008 & IS 12640(Pt.2):2008   17-2-2010    
1028   CMD-III   CMD-III/16:208(423)   Implementation of Amendment No.5, November 2009 to IS 208:1996 Specification for Door Handles (fifth revision) and revised STI (doc: STI/208/7,dec2009)   12-2-2010    
1029   CMD-II   CMD-II/16:14543(Tint)   Circular   12-2-2010    
1030   CMD-II   CMD-II/16:15658(445)   Implementation of Amendment No 1, January 2010 to IS 15658:2006 Specification for Precast Concrete Blocks for Paving   5-2-2010    
1031   CMD-III   CMD-III/16:8808(444)   Implementation of Amendment No 3, January 2010 to Is 8808:1999 Specification for Burners for Oil Pressure Stoves and Oil Pressure Heaters (second revision)   5-2-2010    
1032   CMD-III   STI/278/5   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF GALVANIZED STEEL BARBED WIRE FOR FENCING ACCORDING ACCORDING TO IS 278:2009 (Fourth Revision)   5-2-2010    
1033   CMD-III   CMD III/16:996   Proposal for Implementation of IS 996:2009 – Single Phase a.c. Induction Motors for General Purpose & draft Amend.No.1   4-2-2010    
1034   CMD-I   CMD I/31   Amendment No. 14 to Operating Manual for Product Certification, 2004   3-2-2010    
1035   CMD-III   CMD-III/16:278(442)   Implementation of revised IS 278 : 2009 Specification for Galvanized Steel Barbed Wire for Fencing (Fourth Revision) and revised STI [ Doc: STI/278/5, April 2010 ]   3-2-2010    
1036   CMD-III   CMD-III/16:1538   Implementation of Amendment No.3, June 2008 to IS 1538: 1993 Cast Iron Fittings for Pressure Pipes for Water, Gas and Sewage (Third Revision)   28-1-2010    
1037   CMD-III   CMD-III/16:2831   Implementation of Amendment No.2 to IS 2831: 2001 Carbon Steel Cast Billet Ingots, Billets, Blooms and Slabs for Re-rolling into Low Tensile Structural Steel & Revised STI, DOC: STI/2831/6, December 2009   28-1-2010    
1038   CMD-III   CMD-III/16:7285(part2)   Implementation of Amendment No.2, November 2009 to IS 7285 (Part 2): 2004 Refillable Seamless Steel Gas Cylinders, Part 2, Quenched and Tempered Steel Cylinders with Tensile Strength Less than 1100 MPa (112 kgf/mm2)   28-1-2010    
1039   CMD-III   CMD-III/16:15490   Implementation of Amendment No.2, December 2009 to IS 15490: 2004 Cylinder for On-Board Storage of Compressed Natural Gas as a Fuel for Automotive Vehicles.   28-1-2010    
1040   CMD-III   CMD-III/16:3196(part4)   Implementation of Amendment No.2, November 2009 to IS 3196 (part4):2001 Specification for Welded Low Carbon Steel Cylinders exceeding 5 litre water capacity for Low Pressure Liquefiable Gases, Part 4 Cylinders for Toxic and Corrosive Gases   28-1-2010    
1041   CMD-III   CMD-III/16:4984   IS 4984 : 1995 Specification for HDPE Pipes for Water Supply   22-1-2010    
1042   CMD-III   CMD-III/16:3989   Implementation of revised IS 3989: 2009 Specification for Centrifugally Cast (Spun) Iron Spigot and Socket Soil, Waste, Ventilating and Rainwater Pipes, Fittings and Accessories (Third Revision) and revised STI [Doc: STI/3989/5, April 2010]   22-1-2010    
1043   CMD-III   CMDIII/16:15627,33,36,13098(436)   Implementation of Pneumatic Tyres and Tubes for Automotive Vehicles(Quality Control) Orde,2009 (vide so no 2953E dated 19 11 2009) issued by Ministry of Commerce and Industry (Department of Industrial Policy and Promotion)   21-1-2010    
1044   CMD-III   CMDIII/16:1258(427)   Implementation of Amendment No 2 to IS 1258:2005 Specification for Bayonet Lampholders   21-1-2010    
1045   CMD-III   CMDIII/16:1293(426)   Implementation of Amendment No.4 to IS 1293:2005 Specification for Plugs and Socket- Outlets   21-1-2010    
1046   CMD-III   CMD III/16:302-1   Implementation of Revised IS 302-2-3:2007, 302-2-30:2007 & IS 302-2-201:2008   21-1-2010    
1047   CMD-III   CMD III/16:302-1   Implementation of Amendment No.1 issued to IS 302-1:2008 Specification for Safety of Household and similar Electrical Appliances - General Requirements.   20-1-2010    
1048   CMD-III   CMD-III/16:3196(part4)   Implementation of Amendment No.2, December 2009 to IS 3196 (part4):2001 Specification for Welded Low Carbon Steel Cylinders exceeding 5 litre water capacity for Low Pressure Liquefiable Gases, Part 4 Cylinders for Toxic and Corrosive Gases   19-1-2010    
1049   CMD-III   CMD-III/16:15636   Implementation of Amendment No.2, December 2009 to IS 15636:2005 Automotive Vehicles - Diagonal and Radial Ply.   19-1-2010    
1050   CMD-III   STI/8329/FU/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF CENTRIFUGALLY CAST (SPUN) DUCTILE IRON PRESSURE PIPES FOR WATER, GAS AND SEWAGE ACCORDING TO IS 8329: 2000 (FOR FLANGING UNITS)   19-1-2010    
1051   CMD-III   CMD-III/16: 8329   Modified Procedure for GOL and operation of scheme for Flanging Units of DI Pipes as per IS 8329   19-1-2010    
1052   CMD-III   STI/4246/13   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF DOMESTIC GAS STOVES FOR USE WITH LIQUIFIED PETROLEUM GASES ACCORDING TO IS 4246:2002 (FIFTH REVISION) (Including Amendment No. 1 & 2)   19-1-2010    
1053   CMD-III   CMD-III/16:4246   IMPLEMENTATION OF AMENDMENT NO 2 & REVISED STI DOC: STI/4246/13 APRIL 2010   19-1-2010    
1054   CMD-III   STI/60079-1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ELECTRICAL EQUIPMENT FOR USE IN EXPLOSIVE ATMOSPHERES PART 1 – EQUIPMENT PROTECTION BY FLAMEPROOF ENLCOSURES “d” ACCORDING TO IS/IEC 60079-1:2007   18-1-2010    
1055   CMD-III   CMD III/16:60079-1   Proposal for the Implementation of IS/IEC 60079-1:2007 superceding IS 2148:2004 - ELECTRICAL EQUIPMENT FOR USE IN EXPLOSIVE ATMOSPHERES PART 1 – EQUIPMENT PROTECTION BY FLAMEPROOF ENLCOSURES “d”   18-1-2010    
1056   CMD-III   CMD III/16:1293   Implementation of Amendment No.4 to IS 1293: 2005 Specification for Plugs and Socket-Outlets.   5-1-2010    
1057   CMD-III   CMD III/16:1258   Implementation of Amendment No.2 to IS 1258: 2005 Specification for Bayonet Lampholders.   1-1-2010    
1058   CMD-III   STI/3224/10   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF VALVE FITTINGS FOR COMPRESSED GAS CYLINDERS EXCLUDING LIQUEFIED PETROLEUM GAS (LPG) CYLINDERS ACCORDING TO IS 3224:2002(Third Revision) (Including Amendment No.1&2)   24-12-2009    
1059   CMD-III   CMD-III/16:3224   Implementation of Amendment No.2, January 2009 to IS 3224:2002 Valve Fittings for Compressed Gas Cylinders Excluding Liquefied Petroleum Gas (LPG) Cylinders – Specification   24-12-2009    
1060   CMD-III   CMD-III/303,1328   STI for IS 303:1989 & IS 1328:1996 including ECO Mark Requirements   24-12-2009    
1061   CMD-III   CMD-III/16:3074   Implementation of revised STI, DOC : STI/3074/3, December 2009   24-12-2009    
1062   CMD-III   STI/13799/1   SCHEME OF TESTING AND INSPECTION FOR CERIFICATION OF POLYURETHANE BASE SURFACER (TWO-PACK) FOR EXTERIOR PAINTING OF RAILWAY COACHES ACCORDING TO IS 13799:1993   22-12-2009    
1063   CMD-III   STI/13213/1   SCHEME OF TESTING AND INSPECTION FOR CERIFICATION OF POLYURETHANE FULL GLOSS ENAMEL (TWO-PACK) ACCORDING TO IS 13213:1991(INCORPORATING AMANDMENT NO. 1)   22-12-2009    
1064   CMD-III   STI/5666/1   SCHEME OF TESTING AND INSPECTION OR CERIFICATION OF ETCH PRIMER ACCORDING TO IS 5666:1970 (Incorporating Amendment No. 1)   22-12-2009    
1065   CMD-III   CMD-III/16:7285 (Part 2)   Implementation of Amendment No.2, November 2009 to IS 7285 (Part 2): 2004 Refillable Seamless Steel Gas Cylinders, Part 2, Quenched and Tempered Steel Cylinders with Tensile Strength Less than 1100 MPa (112 kgf/mm2)   22-12-2009    
1066   CMD-III   CMD-III/16:2831   Implementation of Amendment No.2 to IS 2831: 2001 Carbon Steel Cast Billet Ingots, Billets, Blooms and Slabs for Re-rolling into Low Tensile Structural Steel & Revised STI, DOC: STI/2831/6, December 2009   22-12-2009    
1067   CMD-III   CMD-III/16: 11951   Implementation of revised STI, DOC: STI/11951/2, February 2010   22-12-2009    
1068   CMD-III   CMD-III/16:4351(417)   Implementation of Amendment No.1, November 2009 to IS 4351 : 2003 Specification for Steel Door Frames (Second Revision).   21-12-2009    
1069   CMD-III   CMD-III/16:2202(part-1)   Implementation of Amendment No.2, November 2009 to IS 2202 (part1):1999 Specification for Wooden Flush Door Shutters (Solid Core Type), part 1 - Plywood Face Panels (Sixth Revision).   21-12-2009    
1070   CMD-III   STI/60947-4-1/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR PART 4 CONTACTORS AND MOTOR-STARTERS SEC 1 Electromechanical Contactors and Motor-Starters According to IS/IEC60947-4-1:2000 (Including Amendment no.2)   16-12-2009    
1071   CMD-III   STI/60947-3/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR PART 3 Switches, Disconnectors, Switch-Disconnectors and Fuse Combination units According to IS/IEC60947-3:1999 (Incorporating Amendment No. 1 & 2)   16-12-2009    
1072   CMD-III   STI//8048/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ELECTROCARDIOGRAPH ACCORDING TO IS 8048:1985 (Incorporating Amendment No. 1 & 2)   16-12-2009    
1073   CMD-III   STI   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF DRY POWDER FIRE EXTINGUISHER FOR METAL FIRES ACCORDING TO IS 11833:1986 INCLUDING ECO MARK REQUIREMENTS (Including Amendment No. 1 to 3)   16-12-2009    
1074   CMD-III   STI   SCHEME OF TESTING AND INSPECTION FOR PORTABLE FIRE EXTINGUISHERS- PERFORMANCE AND CONSTRUCTION AS PER IS 15683: 2006   16-12-2009    
1075   CMD-III   CMD-III/16:13958/412   Implementation of amendment no.4, Nov09 to IS 13958:1994 Spec for Bamboo Mat Board for General Purposes and Revised STI [ DOC:STI/13958/2, June 09]   10-12-2009    
1076   CMD-III   CMD-III/16:4020/413   Implementation of amendment no.1, Nov 09 to IS 4020(part 8):1998 Door Shutters- Methods Of Tests, Part 8 Shock resistance test (third Revision )   10-12-2009    
1077   CMD-III   CMD-III/16:60947-4-1/408   Implementation of IS/IEC 60947-4-1:2000 due to revision of IS 13947 series of specification as IS/IEC 60947 series   8-12-2009    
1078   CMD-III   CMD-III/16:15450(410)   Implementation of Amendment no.2, November 2009 to IS 15450:2004 Specification for Polyethylene/Aluminium/Polythene Composite Pressure Pipes for Hot and Cold Water Supplies   8-12-2009    
1079   CMD-III   CMD-III/16:1239   Implementation of Amendment no.1, October 2009 to IS 554/ISO 7-1:1994   8-12-2009    
1080   CMD-III   CMD-III/16:12709   STI & Grouping Guidelines for IS 12709 : 1994   4-12-2009    
1081   CMD-III   CMD-III/16:11833(403)   Fixation and Marking Fee including ECO Mark Requirements for Dry Powder Fire Extinguisher for Metal Fires as per IS 11833:1986   4-12-2009    
1082   CMD-III   CMD-III/16:8001/397   Comments on Draft Amendment No.2 to IS 8001:1976 Specification for Packaging of Plywood, Blockboards and Flush Doors for Export   4-12-2009    
1083   CMD-III   CMD-III/16:14402   STI and Grouping Guidelines for IS 14402 : 1996   4-12-2009    
1084   CMD-III   CMD-III/16:11552(400)   Fixation of Marking Fee for Liquid Nitrogen Vessels of Capacity Upto 75 Litre as per IS 11552:2008   4-12-2009    
1085   CMD-III   CMD-III/16:15100(404)   Implementation of Amendment No.4, November 2009 to IS 15100:2001 Specification for Multifunction Valve Assembly for Permanent Fixed Liquefied Petroleum Gas (LPG) Containers for Automotive Use.   4-12-2009    
1086   CMD-III   CMD-III/16:14276(409)   Implementation of Amendment No.4, November 2009 to IS14276:1995 Specification for Cement Bonded Particle Boards   4-12-2009    
1087   CMD-III   CMD-III/16:3074   Fixation of Marking Fee for Steel Tubes for Automotive Purposes as per IS 3074:2005   4-12-2009    
1088   CMD-III   CMD-III/16:15801(407)   Amendment No.1 june 2009 to IS 15801:2008 Polypropylene Random Copolymer Pipes for Hot and Cold Water Supplies   4-12-2009    
1089   CMD-III   CMD-III/16:13258(405)   Implementation of Amendment No.1, November 2009 to IS 13258:1991 Specification for Welded Low Carbon Steel Cylinders Exceeding 5 litre Water Capacity for Low Pressure Liquefiable Gases - Code of Practice for Inspection and Reconditioning of used Cylinders   4-12-2009    
1090   CMD-III   STI/60947-2/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR PART 2 CIRCUIT BREAKERS ACCORDING TO IS/IEC60947-2:2003   4-12-2009    
1091   CMD-III   CMD III/16:60947-2   Implementation of IS/IEC 60947-2:2003 due to revision of IS 13947 series of specifications as IS/IEC 60947 series   2-12-2009    
1092   CMD-III   STI/60947-3/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR PART 3 Switches, Disconnectors, Switch-Disconnectors and Fuse Combination units According to IS/IEC60947-3:1999   1-12-2009    
1093   CMD-III   CMD III/16:60947-3   Implementation of IS/IEC 60947-3:1999 due to revision of IS 13947 series of specifications as IS/IEC 60947 series   1-12-2009    
1094   CMD-III   CMD-III/16:8329/9523   Implementation of Ductile iron Pressure Pipes and Fittings (Quality Control) Order 2009   25-11-2009    
1095   CMD-III   CMD-III/16:1536   Implementation of revised STI for certification of Centrifugally cast (spun) iron Pressure Pipes for water, gas and sewage according to IS 1536:2001 (Fourth Revision), Doc: STI/1536/5 Feb 2002   25-11-2009    
1096   CMD-II   CMD-II/16:14543   CIRCULAR   16-11-2009    
1097   CMD-I   CMD I/31   Amendment No. 13 to Operating Manual for Product Certification, 2004   12-11-2009    
1098   CMD-III   CMD-III/16:3196(391)   Introduction of Mandatory BIS Quality Syatem Certification as per IS/ISO 9001 for LPG Cylinder, Valves & Regulators (CVRs) as per IS 3196 (Pt 1), IS 8737 & IS 9798 respectively.   6-11-2009    
1099   CMD-III   STI/60947-5-1/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR PART 5 CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS SEC 1 ELECTROMECHANICAL CONTROL CIRCUIT DEVICES ACCORDING TO IS/IEC60947-5-1:2003   6-11-2009    
1100   CMD-III   CMD III/16:60947-5-1   Implementation of IS/IEC 60947-5-1:2003 due to revision of IS 13947 series of specifications as IS/IEC 60947 series   6-11-2009    
1101   CMD-I   CMD-I/20:1:2   Simplified procedure for grant of licence/inclusion 1) Verified by Chartered Engineers (CE); and 2) Those products which are bulky and difficult to transport   3-11-2009    
1102   CMD-I   CMD I/31   Amendment No. 11 to Operating Manual for Product Certification, 2004   30-10-2009    
1103   CMD-I   CMD I/31   Amendment No. 12 to Operating Manual for Product Certification, 2004   30-10-2009    
1104   CMD-III   CMD-III/16/2062   Certified raw material for rolling into different sections as per IS 2062:2006   23-10-2009    
1105   CMD-III   CMD-III/16:302(386)   Implementation of revised IS 12640 (Pt.1):2008 & IS 12640 (Pt.2):2008   21-10-2009    
1106   CMD-III   CMD-III/16:302(384)   Implementation of revised IS 302-2-3:2007,302-2-30:2007 & IS 302-2-201:2008   21-10-2009    
1107   CMDIII   CMD/16:12894   Fixation of marking fee for certification of IS 12894:2002   8-10-2009    
1108   CMD-III   CMD/16:15778   Fixation of marking fee for certification of IS 15778:2007   8-10-2009    
1109   CMD-III   CMD III/16:996   Proposal for Implementation of IS 996:2009 – Single Phase a.c. Induction Motors for General Purpose   30-9-2009    
1110   CMD-II   CMD-II/16:15271   Reference to Amendment No.2 to IS 15271:2003   29-9-2009    
1111   CMD-III   STI/13098/1   Scheme of Testing and Inspection for Certification of Automotive Vehicles Tubes for Pneumatic Tyres according to IS 13098:1991   29-9-2009    
1112   CMD-III   CMD-III/16:15778   STI for certificationof Unplastisized PVC Pipes for potable water Supplies according to IS 15778:2007 [Doc:SI/15778/1,September 2009]   24-9-2009    
1113   CMD-III   STI-14735/1   Scheme of testing and inspection for cetification of UPVC injection moulded fittings for soil and waste dischage system for inside and outside buildings including ventilation and rain water system According to IS 14735:1999   22-9-2009    
1114   CMD-III   CMD-III/16:14735   Grouping of sizes of UPVC injection molded fittings for soil and waste dischage system for inside and outside buildings including ventilation and rain water system   22-9-2009    
1115   CMD-III   CMD-III/16:15111(Pt 1&2)   Data regarding Implementation of Amendment No. 6 & 7 to IS 15111(Pt 2):2002 for Self Ballasted Lamps for general lighting services Part 2- Performance requirements and revised STI   18-9-2009    
1116   CMD-III   CMD-III/16:12269(373)   Implementation of Amendment No.9, August 2009 to IS 12269 : 1987 Specification for 53 Grade Ordinary Portland Cement   16-9-2009    
1117   CMD-III   STI/15558/2   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF MINI DOMESTIC WATER HEATER FOR USE WITH LPG ACCORDING TO IS 15558:2005   15-9-2009    
1118   CMD-III   CMD III/16:8784   Fixation of Marking Fee for Thermocouple Compensating Cables as per IS 8784:1987   15-9-2009    
1119   CMD-III   CMD-III/16:15801(366)   Grouping Guidelines for Grant of Licence and Inclusion of New Varieties for Polypropylene-Random Copolymer Pipes for Hot and Cold Water Supplies as per IS 15801:2008   15-9-2009    
1120   CMD-III   CMD-III/16:15111(Pt 1&2)   Implementation of Amendment No. 7, April 2009 to IS 15111(Pt 2):2002 for Self Ballasted Lamps for general lighting services Part 2- Performance requirements and revised STI – Reminder.   11-9-2009    
1121   CMD-III   CMD-III/16:12300   Implementation of Amendment No.5 August 2009 to IS 12300 : 1988 Specification for Valve Fittings for Refrigerant Cylinders   11-9-2009    
1122   CMD-III   CMD-III/16:3196 (Part 1)   Implementation of Amendment No.3 August2009 to IS3196(Part1)Specification for Welded Low Carbon Steel Cylinders Exceeding 5 Litre Water Capacity for Low Pressure Liquefiable Gases, Part 1 Cylinders for Liquefied Petroleum Gases (LPG) (First Revision)   11-9-2009    
1123   CMD-III   CMD-III/16:4246   Proposal for Implementation of Amendment No 2 August 2009 to IS 4246:2002 Specification for Domestic Gas Stove for use with LPG.   9-9-2009    
1124   CMD-III   CMD-III/16:8329/9523   Implementation of Ductile Iron Pressure Pipes and Fittings (Quality Control) Order, 2009 w.e.f. 1st July 2009   7-9-2009    
1125   CMD-III   CMD-III/16:1161   Implementation of revised STI for Certification of Steel Tubes for Structural Purposes as per IS 1161:1998,Doc:STI/1161/5 June 2000   4-9-2009    
1126   CMD-III   CMD-III/16:6901   Proposal for Implementation of revised IS 6901:2009 Specification for Pressure Regulators for Gas Cylinders used in Welding, Cutting and Related Processes (Second Revision)   4-9-2009    
1127   CMD-III   STI /15852 & 15853:2009   SCHEME OF TESTING AND INSPECTION FOR CERIFICATION OF TEXTILES – WOVEN SUITING MADE OF COTTON MAN –MADE FIBRES/ FILAEMTS AND THEIR BLENEDS ACCORDING TO IS 15853:2009   4-9-2009    
1128   CMD-III   STI/10243/4   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF 2, 4-D ETHYL ESTER EC ACCORDING IS 10243:1993 (Incorporating Amendment No. 1,2 & 3)   4-9-2009    
1129   CMD-I   CMD-1/23:3:1   Provision of information relating to our licensee to a Central Government Department   1-9-2009    
1130   CMD-III   CMD-III/16:15633   Amendment No.1 August 2009 to S 15633 : 2005 Specification for Automotive Vehicles-Pneumatic Tyres for Passenger Car Vehicles- Diagonal and Radial Ply   1-9-2009    
1131   CMD-III   CMD-III/16:14439 (Part 2)   Scheme of Testing & Inspection of Gas Volume Meters as per IS 14439 (Part 2): 1998   1-9-2009    
1132   CMD-III   CMD-III/16:302   Implementation of Revised IS 302-2-3:2007, 302-2-30:2007 & IS 302-2-201:2008   1-9-2009    
1133   CMD-III   STI/14483 (Pt 1)/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF FERTILIZER AND CHEMICAL INJECTION SYSTEM PART: 1 VENTURI INJECTOR ACCORDING TO IS 14483(Part 1):1997 (Including up to Amendments No. 2)   27-8-2009    
1134   CMD-III   STI/8784/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF THERMOCOUPLE COMPENSATING CABLES ACCORDING TO IS 8784:1987   27-8-2009    
1135   CMD-III   CMD/16:458   Grouping and procedure of Precast concrete pipes (with and without reinforcement) as per IS 458:2003 for grant of licence / inclusion   27-8-2009    
1136   CMD-II   CMD-II/16:10243   Implementation of Amendment 3 to IS 10243:1993   27-8-2009    
1137   CMD-III   STI/1038/6   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF STEEL DOORS, WINDOWS AND VENTILATORS (EXCLUDING GLASS PANES) ACORDING TO IS 1038:1983(THIRD REVISION) (Including Amendment No.1 to 3)   24-8-2009    
1138   CMD-III   CMD-III/16:1038(325)   Implementation of Amendment No.3, May 2009 to IS 1038 : 1983 Specification for Steel Doors, Windows and Ventilators (excluding glass Panes) (Third Revision) and modified STI [Doc: STI/1038/6, August 2009]   24-8-2009    
1139   CMD-III   STI/9079/4   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF AUTOMOTIVE VEHICLES – BREAK HOSE ASSEMBLIES FOR HYDRAULIC BREAKING SYSTEMS USED WITH NON-PETROLEUM BASE BRAKE FLUID ACCORDING TO IS 7079:2008 (Third Revision)   21-8-2009    
1140   CMD-III   CMD-III/16:7079   Implementation of revised IS 7079:2008, Automotive Vehicles – Brake Hose Assembly for Hydraulic Braking Systems used with non – petroleum based Brake Fluid   21-8-2009    
1141   CMD-II   CMD-II/G-6   Issue of notice by Head (BOs), prior to expiry of licence.   21-8-2009    
1142   CMD-III   CMD-III/16:4985   Grouping of Sizes of UPVC Pipes for Potable Water Supplies as per IS 4985 for Grant of Licence/Inclusion of Additional Varieties   21-8-2009    
1143   CMD-III   cmdIII/16:8784/358   Scheme of Testing and Inspection for Certification of Thermocouple Compensating Cables according to IS 8784:1987   19-8-2009    
1144   CMD-III   STI/1729/5   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF CAST IRON/DUCTILE IRON DRAINAGE PIPES ANDPIPE FITTINGS FOR OVER GROUND NON-PRESSURE PIPELINE SOCKET AND SPIGOT SERIES ACCORDING TO IS 1729:2002 (Second Revision) (Incorporating Amendment No 1 to 3)   18-8-2009    
1145   CMD-III   CMD-III/16:1729   Implementation of Amendment No 3, June 2008 to IS 1729:2002, Cast Iron/Ductile Iron Drainage Pipes and Pipe Fittings for over ground non- pressure pipeline socket and spigot series According to IS 1729:2002 Revised STI   18-8-2009    
1146   CMD-III   CMD-III/16:4989(part4)(351)   Implementation of Amendment no.2 August 2009 to IS 4989 (part4): 2003 Specification for Multipurpose Aqueous Film Forming Foam Liquid Concentrate for Extinguishing Hydrocarbon and Polar Solvent Fires   10-8-2009    
1147   CMD-III   STI/6639/2   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF HEXAGON HEAD BOLTS FOR GENERAL STEEL STRUCTURES ACCORDING TO IS 6639:2005 (First Revision)   10-8-2009    
1148   CMD-III   CMD-III/16:6639   Implementation of revised IS 6639:2005, Hexagon Head Bolts for General Steel Structures- Specification (First Revision)   10-8-2009    
1149   CMD-II   CMD-II/16:13488   Proforma   10-8-2009    
1150   CMD-II   CMD-II/16:7224   IMPLEMENTATION OF AMENDMENT No.1 TO IS 7224:2006   10-8-2009    
1151   CMD-III   CMD-III/16:280   Implementation of Amendment no. 1 August 2009 to IS 280:2006 Mild steel wire for General Engineering Purposes (fourth revision)   6-8-2009    
1152   CMD-III   CMD-III/16:14106   Dispensing with Lot Inspection of Direct Action Hand Pumps as per IS 14106: 1996   31-7-2009    
1153   CMD-III   CMD-III/16:1489 (Pt.2)   Implementation of Amendment No.4 June 2009 to IS 1489 (Pt. 2) : 1991 Specification for Portland-Pozzolana Cement, Part 2 Calcined Clay Based (Third Revision)   27-7-2009    
1154   CMD-III   CMD-III/16:4246(346)   Procedure for GOL/Inclusion when Licensee declares thermal efficiency 68 percent and above for Domestic Gas Stoves for use with LPG as per IS 4246:2002 and Implementation of Revised STI Doc:STI/4246/12 Mar 2009   24-7-2009    
1155   CMD-III   CMD-III/16:455(347)   Implementation of Amendment No.6, June 2009 to IS 455:1989 Specification for Portland Slag Cement (fourth Revision)   24-7-2009    
1156   CMD-II   CMD-II/16:Pesticide   Circular for Pesticide   22-7-2009    
1157   CMD-III   STI/5509/3   Scheme of testing and inspection for certification of fire retardant plywood according to IS 5509:2000(second revision)   21-7-2009    
1158   CMD-III   CMD-III/16:14930(pt2)   Grouping of sizes for Conduit Systems for Electrical Installations Particular Requirments Conduit Systems Burried Underground as per IS 14930 (part 2):2001   20-7-2009    
1159   CMD-III   CMD-III/16:1489 (Pt.1)   Implementation of Amendment No.5 June 2009 to IS 1489 (Pt.1) : 1991 Specification for Portland-Pozzolana Cement, Part 1 Fly Ash Based (Third Revision)   17-7-2009    
1160   CMD-III   CMD-III/16:14930 (Pt.2)   Scheme of Testing and Inspection for Certification of Conduit Systems For Electrical Installations as per IS 14930 (Part 2):200 [ Doc: STI/14930(Part II)/1, June 2003 ]   17-7-2009    
1161   CMD-III   STI/14930(pt.II)1   Scheme of Testing and Inspection for Certification of Conduit Systems For Electrical Installations according to IS 14930 (pt.II) 2001   17-7-2009    
1162   CMD-III   CMD-III/16:15658(118)   Grouping for grant of licence and inclusion of new varieties for precast concrete blocks for paving as per IS 15658:2006   17-7-2009    
1163   CMD-III   STI/11010/2   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ZIRAM SC ACCORDING TO IS: 11010-1984   14-7-2009    
1164   CMD-III   CMD-III/16:13983   Implementation of Amendment No.3 June 2009 to IS 13983 : 1994 Specification for Stainless Steel Sinks for Domestic Purposes   14-7-2009    
1165   CMD-III   CMD-III/16:651   Implementation of Amendment No.1 June 2009 to IS 651 : 2007 Specification for Glazed Stoneware Pipes and Fittings (Sixth Revision)   14-7-2009    
1166   CMD-III   CMD-III/16:204   Draft grouping guidelines for Grant of Licence and inclusion of new varieties for Tower Bolts as per IS 204(part-2):1992   13-7-2009    
1167   CMD-III   CMD-III/16:8329/9523   Implementation of Ductile Iron Pressure Pipes and Fittings (Quality Control) Order, 2009 w.e.f. 1st day of July 2009   13-7-2009    
1168   CMD-III   STI/1897/3   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF COPPER STRIP FOR ELECTRICAL PURPOSES ACCORDING TO IS 1897:2008 (Third Revision)   6-7-2009    
1169   CMDIII   CMD-III/16:1897   Implementation of revised IS 1897:2008 Copper strip for electrical purposes   6-7-2009    
1170   CMDII   CMD-II/16:14433   Restriction on use of Algal Oil and its derivatives in food products.   6-7-2009    
1171   CMD-III   STI/15787/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SWITCH-SOCKET-OUTLETS (NON-INTERLOCK TYPE) ACCORDING TO IS 15787:2008   3-7-2009    
1172   CMD-III   CMD III/16: 15787   Implementation of IS 15787:2008 by revising IS 4615:1968 and new STI.   3-7-2009    
1173   CMDII   CMD-II/16:14433   Restriction on use of Algal Oil and its derivatives in food products.   2-7-2009    
1174   CMD-III   CMDIII/16:60898-1   Change of date of implementation of IS/IEC 60898-1:2002   2-7-2009    
1175   CMD-III   CMD-III/16:458(334)   Proposed Grouping and procedure of Precast concrete pipes (with and Without reinforcement) as per IS 458 : 2003 for Grant of licence/inclusion and for operation of licence   29-6-2009    
1176   cmd-III   CMD-III/16:3196 (Pt.1)   Introduction of Mandatory BIS Quality System Certification as perIS/ISO 9001 for LPG Cylinder, Valves & Regulators (CVRs) as per IS 3196 (Pt 1), IS 8737 & IS 9798 respectively   25-6-2009    
1177   CMD-III   CMD-III/16:15391   Grouping guidelines for IS 15391, cold rolled non oriented electrical steel-semi processed for drawal of samples for considering inclusion/Grant of licence   24-6-2009    
1178   CMD-III   IS 1038:1983   Amendment No. 3 May 2009 to IS 1038:1983 specification for steel doors,windows and ventilators (third version)   24-6-2009    
1179   CMD-III   CMD-III/16:3024   Grouping guidelines for IS 3024, cold rolled grain oriented electrical steel for drawal of samples for considering inclusion/Grant of licence   24-6-2009    
1180   CMD-III   STI/13958/2   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF BAMBOO MAT BOARD FOR GENERAL PURPOSE ACCORDING TO IS: 13958-1994 (Incorporating Amendment No 1 to 3) (First Revision)   24-6-2009    
1181   CMD-III   CMD-III/16:13958(323)   Implementation of Amendment No. 3, December 2008 to IS 13958 : 1994 Specification for Bamboo Mat Board for General Purposes and revised STI [ Doc:STI/13958/2, June 2009 ]   24-6-2009    
1182   CMD-III   CMD-III/16:648   Grouping guidelines for IS 648 (non- oriented electric steel for magnetic circuits) for drawal of samples for considering inclusion/Grant of licence   24-6-2009    
1183   CMD-III   STI/281/3   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF MILD STEEL SLIDING DOOR BOLTS FOR USE WITH PADLOCKS ACCORDING TO IS 281:2009(Fourth Revision)   24-6-2009    
1184   CMD-III   CMD-III/16:281   Implementation of revised IS 281:2009 Mild Steel Sliding Door Bolts for use with Padlocks and revised STI, Doc:STI/281/3 August 2009.   24-6-2009    
1185   CMD-III   CMD III/16: 13779   Guidelines for Sampling to cover various varieties/range of ac Static Watthour Meters as per IS 13779:1999.   19-6-2009    
1186   CMD-III   CMD-III/16:1592   Implementation of Amendment No.1, May 2009 to IS 1592 : 2003 Specification for Asbestos Cement Pressure Pipes and Joints   19-6-2009    
1187   CMD-III   CMD-III/16:12592   Implementation of revised standard / STI of Specification for Precast Concrete Manhole Covers and Frames as per IS 12592:2002 including Amendment No. 1 & 2 to IS 12592:2002 (superseding IS 12592(Part 1)-1988 and IS 12592(Part 2)-1991)   19-6-2009    
1188   CMD-III   STI/2002/5   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF STEEL PLATE FOR PRESSURE VESSELS FOR INTERMEDIATE AND HIGH TEMPERATURE SERVICE INCLUDING BOILERS ACORDING TO IS 2002:2009 (Third Revision)   18-6-2009    
1189   CMD-III   CMD-III/16:2002   Implementation of revised IS 2002:2009 for Steel plate for pressure vessel for intermediate and high temperature service including boilers.   18-6-2009    
1190   CMD-III   STI/13021(Pt 2)/2   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ac SUPPLIED ELECTRONIC BALLASTS FOR TUBULAR FLUORESCENT LAMPS ACCORDING TO IS 13021(PART 2)-1991 PERFORMANCE REQUIREMENTS (Incorporating Amendment No. 1 & 2)   16-6-2009    
1191   CMD-III   CMD III/ 16: 13021(Pt 1)   Revised Scheme of Testing and Inspection for Certification of ac Supplied Electronic Ballasts for Tubular Fluorescent Lamps, Part 2 – Performance Requirements as per IS 13021(Pt 2):1991.   16-6-2009    
1192   CMDIII   CMD III-165312(319)   Implementation of Amendment No.2, May 2009 to IS 5312 (part 1): 2004 Specification for Swing Check Type Reflux (Non-return) Valves for Water Works Purposes (Second Revivion)   15-6-2009    
1193   CMDIII   CMD III-1614276(316)   Implementation of Amendment No.3,June 2009 to IS 14276:1995 Specification for Cement Bonded Particle Boards.   15-6-2009    
1194   CMDIII   CMD III-162878(318)   Implementation of Amendment No.6, May 2009 to IS 2878:2004 Specification for Fire Extinguisher, Carbon Dioxide type (Portable and Trolley Mounted)(Third revision)   15-6-2009    
1195   CMDIII   CMD-III/16:13849   Painting requirements in the Indian Standards of various types of Fire Extinguishers   10-6-2009    
1196   CMDIII   CMD-III/16:2041(315)   Implementation of revised IS 2041:2009 Steel Plates for Pressure Vessels used at Moderate and Low Temperature   10-6-2009    
1197   CMD-III   STI/2041/ 2   SCHEME OF TESTING AND INPECTION FOR CERTIFICATION OF STEEL PLATES FOR PRESSURE VESSELS USED AT MODERATE AND LOW TEMPERATURE ACCORDING TO IS 2041:2009 (Third Revision)   8-6-2009    
1198   CMDIII   CMD-III/16:2041   Implementation of revised IS 2041:2009 Steel Plates for Pressure Vessels used at Moderate and Low Temperature   8-6-2009    
1199   CMD-III   STI/302-2-201/2   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES ELECTRIC IMMERSION WATER HEATER ACCORDING TO IS 302-2-201:2008   8-6-2009    
1200   CMDIII   CMD III/16:302-2-201   Implementation of revised IS 302-2-201:2008 superceding IS 302-2-201:1992 – Electric Immersion Water Heaters.   8-6-2009    
1201   CMDIII   CMDIII/16:13849(309)   Implementation of Amendment No.10,May 2009 to IS 13849 : 1993 for Portable Fire Extinguisher-Dry-Powder Type (Stored Pressure)   8-6-2009    
1202   CMD-III   STI/302-2-30/2   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES ROOM HEATER ACCORDING TO IS 302-2-30:2007   5-6-2009    
1203   CMDIII   CMD III/16:302-2-30   Implementation of revised IS 302-2-30:2007 superceding IS 302-2-30:1992 – Room Heaters (Electric Radiator).   5-6-2009    
1204   CMD-III   STI/302-2-3/2   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES ELECTRIC IRON ACCORDING TO IS 302-2-3:2007   5-6-2009    
1205   CMDIII   CMD III/16:302-2-3   Implementation of revised IS 302-2-3:2007 superceding IS 302-2-3:1992 – Electric Iron.   5-6-2009    
1206   CMDIII   CMDIII/16:12640(307)   Implementation of revised IS 12640 (part 1):2008 / IEC 61008-1:1996 AND is 12640 (PART 2):2008 / IEC 61009-1:1996 superceding IS 12640 (part 1):2000 and IS 12640(part 2):2001 respectively.   5-6-2009    
1207   CMDIII   CMD-III/16:14871(308)   Implementation of Amendment No.1, May 2009 to IS 14871:2000 Specification for Products in Fibre Reinforced Cement-Long Corrugated or Asimmetrical Section Sheets and Fittings for Roofing and Cladding.   4-6-2009    
1208   CMDIII   CMD-III/16:14862   Implementation of Amendment No.3, May 2009 to IS 14862:2000 Specification for Fibre Cement Flat Sheets.   4-6-2009    
1209   CMDIII   CMD-III/16:459(301)   Implementation of Amendment No.3, May 2009 to IS 459:1992 Specification for Corrugated and semi-corrugated Asbestos Cement Sheets (Third Revision).   4-6-2009    
1210   CMDIII   CMD-III/16:15500(299)   Implementation of Amendment No.2, May 2009 to IS 15500(parts 1 to 8) : 2004 Specification for Deepwell Handpumps, Components and Special Tools.   4-6-2009    
1211   CMD-III   STI/12640(Pt.2)/3   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF RESIDUAL CURRENT OPERATED CIRCUIT BREAKERS FOR HOUSEHOLD AND SIMILAR USES PART 2 CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION (RCBOs) ACCORDING TO IS 12640(Pt.2):2008/IEC 61009-1:1996   2-6-2009    
1212   CMD-III   STI/12640(Pt.1)/3   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF RESIDUAL CURRENT OPERATED CIRCUIT BREAKERS FOR HOUSEHOLD AND SIMILAR USES PART 1 CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION (RCCBs) ACCORDING TO IS 12640(Pt.1):2008/IEC 61008-1:1996   2-6-2009    
1213   CMDIII   CMD III/ 16: 12640   Implementation of revised IS 12640 (Part 1):2008/ IEC 61008-1: 1996 and IS 12640 (Part 2):2008/ IEC 61009-1: 1996 superceding IS 12640 (Part 1): 2000 and IS 12640(Part 2): 2001 respectively.   2-6-2009    
1214   CMD-III   STI/ISO 4090/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF PHOTOGRAPHY – MEDICAL RADIOGRAPHIC CASSETTES/SCREENS/FILMS AND HARD-COPY IMAGING FILMS DIMENSIONS AND SPECIFICATIONS ACCORDING TO IS/ISO 4090:2001   1-6-2009    
1215   CMDIII   CMD III/ 16: IS/ISO 4090   Implementation of IS/ISO 4090:2001 revising IS 6991:1985 & IS 10554:1983   1-6-2009    
1216   CMDIII   CMD-III/16:3589   Scheme of Testing and Inspection for Certification of Steel Pipes for Water and Sewage (168.3 to 2540 mm outside diameter) according to IS 3589 : 2001 (Incorporating Amendment No.1)   28-5-2009    
1217   CMDII   CMD-II/16:1374   Implementation of revised specification for IS 1374:2007   28-5-2009    
1218   CMD-III   STI/1166/6   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF CONDENSED MILK, PARTLY SKIMMED AND SKIMMED CONDENSED MILK ACCORDING TO IS 1166:1986 (Incorporating Amendment No. 1 , 2 & 3)   28-5-2009    
1219   CMDIII   CMD-III/16:15500(46)   Tolerance on Dimensions   26-5-2009    
1220   CMD-III   STI/12664(Pt.1)/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ARTIFICIAL LIMBS-SACH FOOT FOR LOWER EXTREMITY PROSTHESES PART 1 – DESIGN AND DIMENSIONS ACCORDING TO IS 12664(Part 1):2003   8-5-2009    
1221   CMD-III   CMD-III/16:15392   Finalized STI as per IS 15392 : 2003 Aluminium and Aluminium Alloy Bare Foil Food Packaging   6-5-2009    
1222   CMD-III   2002-sti proposal-revised   SCHEME OF TESTING AND INSPECTION FOR CERTIFICA STEEL PLATE FOR PRESSURE VESSELS FOR INTERMEDIATE AND HIGH TEMPERATURE SERVICE INCLUDING BOILERS ACORDING TO IS 2002:2009 (Third Revision)   17-4-2009    
1223   CMDIII   CMD-III/16:2002   Proposal for Implementation of revised IS 2002:2009 for Steel plate for pressure vessel for intermediate and high temperature service including boilers and Comments on draft revised STI.   17-4-2009    
1224   CMD-III   STI-DRAFT   SCHEME OF TESTING AND INPECTION FOR CERTIFICATION OF STEEL PLATES FOR PRESSURE VESSELS USED AT MODERATE AND LOW TEMPERATURE ACCORDING TO IS 2041:2009 (Third Revision)   17-4-2009    
1225   CMDIII   CMD-III/16:2041   Proposal for Implementation of revised IS 2041:2009 Steel Plates for Pressure Vessels used at Moderate and Low Temperature and comments on revised STI.   17-4-2009    
1226   CMDIII   Amend Steel QC Order   Amendment to Steel & Steel Products (Quality Control) Order, 2008   9-4-2009    
1227   CMDIII   CMD-III/16: 1293   Revised STI as per IS 1293: 2005 (Doc: STI/1293/ 8 July 2007)   8-4-2009    
1228   CMDIII   CMD-III/16:15558   Implementation of Amendment No.2 March 2009 to IS 15558 : 2005 Mini Domestic Water Heater for use with LPG – Specification   8-4-2009    
1229   CMD-III   STI/15500(Part 2)/2   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF DEEPWELL HAND PUMPS ACCORDING TO IS 15500 (PART 2):2004   6-4-2009    
1230   CMDIII   CMD-III/IS 15500 (Part 2)   Dispensing with Lot Inspection of Deep well Hand pumps as per IS 15500 (Part 2)   6-4-2009    
1231   CMD-III   STI/4246/12   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF DOMESTIC GAS STOVES FOR USE WITH LIQUIFIED PETROLEUM GASES ACCORDING TO IS 4246:2002 (FIFTH REVISION) (Including Amendment No. 1)   6-4-2009    
1232   CMDIII   CMD-III//16:4246   DISPENSING OF LOT INSPECTION PROCEDURE WHEN LICENSEE DECLARES THERMAL EFFICIENCY 68 PERCENT AND ABOVE FOR DOMESTIC GAS STOVES FOR USE WITH LIQUEFIED PETROLEUM GASES AS PER IS 4246: 2002   6-4-2009    
1233   CMDIII   CMDIII/16:1322(285)   Implementation of Amendment No. 2, February2009 to IS 1322:1993 Bitumen Felts for Water-proofing and Damp-proofing-Specification   2-4-2009    
1234   CMDIII   CMDIII/16:3513(part3)   Implementation of Amendment No. 2 to IS 3515 (part3):1989 Specification for resin Treated Compressed Wood Laminates (Compregs), Part3 for General Purposes(first revision)   2-4-2009    
1235   CMD-III   STI/15111(Part 1 &2)/4   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SELF BALLASTED LAMPS FOR GENERAL LIGHTING SERVICES ACCORDING TO IS 15111(Part 1 & 2):2002   2-4-2009    
1236   CMDIII   CMD-III/16:15111(Pt 1&2)   Implementation of Amendment No. 7, April 2009 to IS 15111(Pt 2):2002 for Self Ballasted Lamps for general lighting services Part 2- Performance requirements and revised STI   2-4-2009    
1237   CMDIII   Amnd7-IS15111(part-2)   AMENDMENT NO. 7 APRIL 2009 TO IS 15111 (PART 2) : 2002 SELF BALLASTED LAMPS FOR GENERAL LIGHTING SERVICES PART 2 PERFORMANCE REQUIREMENTS   2-4-2009    
1238   CMD-I   CMD-I/10:5   MCR for the month of march 2009   1-4-2009    
1239   CMDIII   CMD-III/16:2062   Implementation of Amendment No.1, March 2009 to IS 2062 : 2006 Hot Rolled Low, Medium and High Tensile Structural Stel (Sixth Revision)   1-4-2009    
1240   CMDIII   CMD-III/16:3024   Implementation of Amendment No.1, February 2009 to IS 3024 : 2006 Grain Oriented Electrical Steel Sheet and Strip (Second Revision)   1-4-2009    
1241   CMDIII   CMD-III/16:1239(pt.2)   Implementation of Amendment No.6,July 2008 to IS 1239(part 2):1992 Specification for Steel Tubes,Tubulars and Other Wrought Steel Fittings (Fourth Revision)   31-3-2009    
1242   CMD-III   STI/692/6   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF PAPER INSULATED LEAD-SHEATHED CABLES FOR RATED VOLTAGE UPTO AND INCLUDING 33KV ACCORDING TO IS 692:1994   31-3-2009    
1243   CMD-III   STI/1709/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF CAPACITORS FOR ELECTRIC FAN MOTORS ACCORDING TO IS 1709:1984   31-3-2009    
1244   CMD-III   STI/2086/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF CARRIERS AND BASES USED IN REWIRABLE TYPE ELECTRIC FUSES FOR VOLTAGES UP TO 650V ACCORDING TO IS : 2086:1993 (Including Amendment No.1)   31-3-2009    
1245   CMD-III   STI/2465/6   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF CABLES FOR MOTOR VEHICLES ACCORDING TO IS 2465-1984   31-3-2009    
1246   CMDIII   CMD-III/16:648   Implementation of Amendment No.2, March 2009 to IS 648 : 2006 Cold Rolled Non-oriented Electrical Steel Sheet and Strip-FullProcessed Type-Specification (Fifth Revision)   31-3-2009    
1247   CMDIII   AMND1-IS3024   Implementation of Amendment No.1 Feb 2009 to IS 3024L206 Grain Oriented Electrical Steel Sheet and Strip (Second Revision)   26-3-2009    
1248   CMDIII   AMND2_IS15391   Implementation of Amendment No.2 Feb 2009 to IS 15391:2003 Cold Rolled Non-oriented Electrical Steel Sheet and Strip - Semo-processed type   25-3-2009    
1249   CMDIII   Amnd1_IS14650   Implementation of Amendment No.1 February 2009 to IS 14650:1999 Carbon Steel Cast Billet Ingots, Billets, Blooms and Slabs for Re-rolling purposes   25-3-2009    
1250   CMD-III   STI/398(Pt. 5)/2   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ALUMINIUM CONDUCTORS GALVANIZED STEEL REINFORCED FOR EXTRA HIGH VOLTAGE (400 KV and ABOVE) ACCORDING TO IS 398(Pt. 5):1992   25-3-2009    
1251   CMD-III   STI/13585 (Part 1)/2   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SHUNT CAPACITORS FOR NON-SELF HEATING TYPE FOR ac POWER SYSTEMS HAVING A RATED VOLTAGE UP TO AND INCLUDING 650 V: PART 1 SPECIFICATION ACCORDING TO IS 13585(Part 1):1994   25-3-2009    
1252   CMDIII   Amnd3_277   Implementation of Amendment No.3, Feb 2009 to IS 277:2003 Specifcation for Galvanized Steel Sheets (Plain and Corrugated) (Second Revision)   25-3-2009    
1253   CMD-III   STI/8144/5   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF MULTIPURPOSE DRY BATERIES ACCORDING TO IS 8144:1997   25-3-2009    
1254   CMD-III   STI/3419/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF FITTINGS FOR RIGID NON-METALLIC CONDUITS ACCORDING TO IS: 3419-1988   25-3-2009    
1255   CMD-III   STI/8783(Part 4/Sec1/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATI Winding Wires for Submersible Motors Part 4 Specification for Individual Wires Sec 1 HR PVC Insulated Wires ACORDING TO IS: 8783(Part 4/Sec 1): 1995   25-3-2009    
1256   CMD-III   STI/13925 (Part 1)/2   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SHUNT CAPACITORS FOR AC POWER SYSTEMS HAVING A RATED VOLTAGE ABOVE 1000 V GENERAL PERFORMANCE,TESTING AND RATING SAFETY REQUIREMENTS, GUIDE FOR INSTALLATION AND OPERATION   25-3-2009    
1257   CMDIII   CMDIII/16:15328(274)   Implementation of Amendment No.5, February 2009 to IS 15328:2003 Specification for Unplasticized Non-pressure Polyvinyl Chloride (PVC-U) pipes for use in Underground Drainage and Sewerage Systems   17-3-2009    
1258   CMDIII   CMDIII/16:15391(272)   Implementation of Amendment No.2, February 2009 to IS 15391:2003 Cold Rolled Non-oriented Electrical Steel Sheet and Strip - Semi-processed Type   17-3-2009    
1259   CMDIII   CMDIII/16:60898-1&2(271)   Implementation of IS/IEC 60898-1:2002 & 60898-2:2003,superceding IS 8828:1996.   17-3-2009    
1260   CMD-I   CMD-1/22:1   Allotment of Code and Initial to Approved OSA for CMMS data updating.   12-3-2009    
1261   CMD-III   STI/12933(Pt.1)/5   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION Of SOLAR FLAT PLATE COLLECTOR ACCORDING TO IS 12933(Pt.1):2003 (Second Revision)   9-3-2009    
1262   CMDIII   CMD-III/16:12933   Implementation of Amendment No.2, Dec 2008 to IS: 12933 (Pt-2):2003 Solar Flat Plate Collector, Part-2 (Components) and revision of existing STI, Doc: STI/12933 (Pt-1)/4, March 2007 to STI, Doc: STI/12933(Pt-1)/5, May 2009 as per IS 12933(Pt 1) : 2003.   9-3-2009    
1263   CMD-III   STI/60898-1/1   SCHEME OF TESTING AND INSPECITON FOR CERTIFICATION OF ELECTRICAL ACCESSORIES CIRCUIT BREAKERS FOR OVER CURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS PART-1 CIRCUIT BREAKERS FOR ac OPERATION ACCORDING TO IS/IEC 60898-1:2002   6-3-2009    
1264   CMD-III   CMD III/16:60898-1&2   Implementation of IS/IEC 60898-1:2002 & 60898-2: 2003, superceding IS 8828:1996.   6-3-2009    
1265   CMD-III   CMD-III/16:3024(270)   Implementation of Amendment No.1, February 2009 to IS 3024:2006 Grain Oriented Electrical Steel Sheet and Strip (Second Revision)   6-3-2009    
1266   CMD-III   CMD-III/16:14650(269)   Implementation of Amendment No.1, February 2009 to IS 14650: 1990 Carbon Steel Billet Ingots, Billets,Blooms And Slabs for Re-rolling Purposes   6-3-2009    
1267   CMD-III   CMD-III/16:10109(267)   Implementation of Amendment No.2, February 2009 to IS 10109:2002 oil Pressure Stoves - Offset Burner Type   6-3-2009    
1268   CMD-III   STI/13340/2   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF POWER CAPACITORS OF SELF-HEALING TYPE FOR AC POWER SYSTEMS HAVING RATED VOLTAGE UP TO 650 V ACCORDING TO IS 13340:1993   6-3-2009    
1269   CMD-III   STI/2993/3   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF A.C. MOTOR CAPACITORS ACCORDING TO IS 2993:1998   6-3-2009    
1270   CMD-III   STI /10025/1   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF POLISH, LIQUID (WHITE), FOR CANVAS FOOTWEAR ACCORDING TO IS 10025:1981 (Incorporating Amendment no. 1)   4-3-2009    
1271   CMD-III   STI/335/6   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF NEW INSULATING OILS ACORDING TO IS 335:1993   25-2-2009    
1272   CMD-III   STI/362/4   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF PARLIAMENT HINGES ACCORDING TO IS 362-1991 (Fifth Revision)   23-2-2009    
1273   CMD-III   STI/13779/3   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ac Static Watthour Meters, Class 1 & 2 ACCORDING TO IS 13779:1999 (First Revision)   20-2-2009    
1274   CMD-III   STI-996/5   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SINGLE PHASE SMALL AC AND UNIVE RSAL ELECTRIC MOTORS ACCORDING TO IS: 996-1979 (SECOND REVISION)   20-2-2009    
1275   CMDII   CMD-II/16:7224   Implementation of Amendment No.1 to IS 7224:2006   19-2-2009    
1276   CMD-I   CMD-I/30:1   Allocation of licence numbers   19-2-2009    
1277   CMDIII   CMDIII/16:13010   Guidelines for covering ranges as per IS 13010:2002- ac Watthour Meters class 0.5, 1 & 2 and STI   19-2-2009    
1278   CMD-III   STI/281/2   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF MILD STEEL SLIDING DOOR BOLTS FOR USE WITH PADLOCKS ACORDING TO IS: 281-1991(Including Amendment No.1)(Third Revision)   18-2-2009    
1279   CMDIII   CMD-III/16:2062   Implementation of Steel & Steel Products (Quality Control) Second Order, 2008   17-2-2009    
1280   CMD-I   CMD-III/16:269(Cement)   Declaration regarding Net Weight/Net Mass on Packaged Commodities - case of M/s Ambuja Cements Ltd.   17-2-2009    
1281   CMD-III   STI/3589/7   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF STEEL PIPES FOR WATER AND SEWAGE (168.3 to 2032 mm outside diameter)ACCORDING TO IS 3589:2001(Incorporating Amendment No.1 to 3)   17-2-2009    
1282   CMD-III   STI/778/4   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF COPPER ALLOY GATE, GLOBE AND CHECK VALVES FOR WATER WORKS PURPOSES ACCORDING TO IS 778:1984   13-2-2009    
1283   CMD-III   STI/7098(Pt.1)/4   SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF CROSSLINKED POLYETHYLENE INSULATED THERMOPLASTIC SHEATHED CABLES FOR WORKING VOLTAGES UPTO AND INCLUDING 1100 VOLTS ACCORDING TO IS 7098(Part 1):1988 (Including Amendment Nos.1 to 3)   13-2-2009    
1284   CMDIII   CMD-III(1613010)   Implementation of Amendment No.2 JAN 2009 to IS 13010: 2002 Specification for ac Watthour Meters, class 0.5,1&2.   5-2-2009    
1285   CMDIII   CMDIII1610658   Implementation of Amendment No.7, January 2009 to IS 10658:1999 Specification for Higher Capacity Dry Powder Fire Extinguisher (Trolley Mounted)(First Revision)   4-2-2009    
1286   CMDIII   CMDIII1614333   Implementation of Amendment No.4, January 2009 to IS 14333:1996 High density Polyethylene Pipes for Sewerage-Specification   4-2-2009    
1287   CMDIII   CMDIII162556(part-4)   Implementation of Amendment No.2 December 2008 to IS 2556(part-4):2004 Specification for Vitreous sanitary Appliances(Vitreous China) part4 Specific Requirements of Wash Basins(Fourth revision)   4-2-2009    
1288   CMDI   cmd154311   Amendment No.9 to OMPC-2004(opening and functioning of Dehradun Branch Office, DBO under CRO)   2-2-2009    
1289   CMDIII   CMD III/16:3017   Implementation of Amendment No.5 DEC 2008 to IS 3017: 1985 Specification for Thermostats for use with Electric Water Heaters.   30-1-2009    
1290   CMDIII   CMD-III/16:4985   Implementation of Amendment No.3 January 2009 to IS 4985 : 2000 Specification for Unplasticized PVC Pipes for Potable Water Supplie (Third Revision)   29-1-2009    
1291   CMDIII   CMD III/16:1554(Pt 1)   Implementation of Amendment No.4 DEC 2008